Miniaturized ScAlN Bimorph MEMS Microphone With Windmill Structure Achieving 61.2 dB SNR
- 1 December 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (2) , 359-362
Abstract
The demand for compact, lownoise acoustic transducers have motivated rapid advances in MEMS microphone technology. This work presents a high signal-to-noise ratio (SNR) piezoelectric MEMS microphone that utilizes a Sc ${}_{{0}.{1}}$ Al ${}_{{0}.{9}}$ N bimorph diaphragm with a windmill structure, occupying an area of only 0.3721 mm2. The diaphragm consists of four fixed-anchored beams linked by a central hub, which significantly increases the vibration displacement, effective and maximum bending stress. The fixed-anchored beams enable synchronous movement, forming a piston-like vibration mode. Fabricated on an 8-inch thermal-oxide silicon wafer using a 9-mask surface-micromachining process, the device features integrated pad routing and parallel electrical interconnections among segmented piezoelectric elements. Acoustic measurements show that the original and amplified sensitivities at 1 kHz are −70.12 dB and −35.41 dB (re 1 V/Pa), respectively. The microphone achieves an SNR exceeding 61.2 dB over the full audio band, along with a minimum detectable sound pressure of 1 mPa (34 dB SPL) and a resolution of 1 mPa. These performance metrics demonstrate the suitability of the device for low-frequency voice capture and other miniaturized acoustic sensing applications.Keywords
Funding Information
- National Key Research and the Development Program of China (2023YFB3211303)
- Basic Research Program of Jiangsu Province, China (BK20230265)
This publication has 27 references indexed in Scilit:
- Recent development and futuristic applications of MEMS based piezoelectric microphonesSensors and Actuators A: Physical, 2022
- A piezoelectric MEMS microphone optimizer platformAlexandria Engineering Journal, 2022
- Design and characterization of a MEMS piezoelectric acoustic sensor with the enhanced signal-to-noise ratioSensors and Actuators A: Physical, 2020
- Flexible Piezoelectric Acoustic Sensors and Machine Learning for Speech ProcessingAdvanced Materials, 2019
- Design, fabrication and reliability study of piezoelectric ZnO based structure for development of MEMS acoustic sensorMicrosystem Technologies, 2019
- Fabrication and characterization of zinc oxide piezoelectric MEMS resonatorMicrosystem Technologies, 2019
- Review: environmental friendly lead-free piezoelectric materialsJournal of Materials Science, 2009
- Acoustic transducers with a perforated damping backplate based on PZT/silicon wafer bonding techniqueSensors and Actuators A: Physical, 2009
- Enhancement of Piezoelectric Response in Scandium Aluminum Nitride Alloy Thin Films Prepared by Dual Reactive CosputteringAdvanced Materials, 2009
- ZnO on Si integrated acoustic sensorSensors and Actuators, 1983