Fatigue, Fracture and Damage Tolerance of Ultrahigh-Strength Martensitic Tendon-Rods for Structural Engineering
Preprint
- 20 November 2024
- preprint
- Published by MDPI AG in Preprints.org
Abstract
The paper addresses the fatigue resistance, fracture behavior and damage tolerance of a new type of ultrahigh-strength bar for prestressing concrete made of a low-alloy lath martensitic steel. The fracture tests showed that the bar steel has a medium-high fracture toughness of 75 MPa√m and a fatigue cracking resistance that fits the Paris-Erdogan Law as most of Eurocode 3 structural steels. The damage tolerance analysis combines two Failure Assessment Diagrams – FADs, respectively involving the damage level and the toughness, and yielding capacity influences on the failure of the bar steel. The location of the experimental failure data in the FADs indicate that the steel is endowed with a combination of strength, ductility and toughness able to prevent unexpected failures. The damage micro-mechanisms revealed from the examination of broken specimens differ from fatigue to fracture cracking, but in a manner consistent with the observed mechanical behavior and microstructure of the bar steel.Keywords
All Related Versions
- Version 1, 2024-11-20, Preprints
- Published version: Applied Sciences, 14 (24), 11543.
This publication has 20 references indexed in Scilit:
- Fatigue crack deflection and branching behavior of low carbon steel under mechanically large grain conditionInternational Journal of Fatigue, 2021
- Crystallographic analysis of fatigue fracture initiation in 8Ni-0.1C martensitic steelInternational Journal of Fatigue, 2021
- Effects of metallic microstructures on fatigue fracture of Q345 steelJournal of Iron and Steel Research International, 2020
- Measuring fatigue crack deflections via cracking of constituent particles in AA7050 via in situ x-ray synchrotron-based micro-tomographyInternational Journal of Fatigue, 2018
- Environment-assisted failure of structural tendons for construction and building applicationsConstruction and Building Materials, 2018
- New testing method for assessing the cracking sensibility of stressed tendon rods in aggressive environmentsEngineering Failure Analysis, 2016
- Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concreteConstruction and Building Materials, 2014
- Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutectoid pearlitic steel wireActa Materialia, 2012
- A critical review of stress intensity factor solutions for surface cracks in round bars subjected to tension loadingEngineering Failure Analysis, 2009
- Compliance calibration of the short rod chevron-notch specimen for fracture toughness testing of brittle materialsInternational Journal of Fracture, 1982