Patricia Santos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Patricia Santos has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Mihaela Iordachescu
Material Science Department, ETSI Caminos, Polytechnic University of Madrid, 5 Prof. Aranguren St., 28040 Madrid, Spain
6 shared publications - Andrés Valiente
Material Science Department, ETSI Caminos, Polytechnic University of Madrid, 5 Prof. Aranguren St., 28040 Madrid, Spain
5 shared publications - Elena Scutelnicu
Centre for Advanced Research in Welding, Manufacturing Engineering Department, Faculty of Engineering, “Dunarea de Jos” University of Galati, 80008 Galati, Romania
4 shared publications - Maricely De Abreu
Material Science Department, ETSI Caminos, Polytechnic University of Madrid, 5 Prof. Aranguren St., 28040 Madrid, Spain
2 shared publications Andrés Valiente
1 shared publicationMaricely De Abreu
1 shared publication
Latest Publications
- Open Access
- 2 March 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (3) , 89
New Insight into Mechanical, Microstructural and Failure Features of Lap-Fillet Autogenous Laser-Welded Similar and Dissimilar Joints of Ultra-Thin Steel Sheets
This research work addresses the mechanical and metallurgical characterisation, as well as the failure features, of two types of lap-fillet autogenous laser-welded joints made of ultra-thin sheets by applying an appropriate welding technology for producing sound welds and flawless joints. Both welded samples, one made only of stainless steel (SS-SS) sheets, and the other made of stainless steel and carbon steel (SS-CS) plates, were subjected to tensile–shear loads that are representative of the in-service conditions. The experimental research was focused on determining, by the digital image correlation (VIC-2D) method, the strain field and the rotation angle of the welded joints that were developed during loading tests of the welded specimens. Comparing to the classical testing method applied to study the joint overall mechanical properties, the novelty of this research consists of local mechanical behaviour assessment of relevant zones from similar and dissimilar welded joints, by using the innovative technique VIC-2D. Based on the analysis of the experimental results, it was found that the maximum rotation angle is 2.5 times higher in the SS-SS similar welded joint, in comparison with the SS-CS dissimilar welded joint. Despite this finding, the SS-CS specimen failed in the CS base material, far from the weld, with the failure phenomenon being preceded by the material yielding and necking. This failure mode is consistent with the detected strength mismatch of the SS-CS joint, with respect to the CS base material. In contrast, the quasi-ductile fracture of the SS-SS welded joint occurred by plastic exhaustion at the boundary between the narrow Heat-Affected Zone (HAZ) of SS and the Fuzion Zone (FZ). These outcomes are consistent with the hardness profile, microstructural heterogeneities found in the lap-fillet welded joints, and the load versus elongation curves that are determined and discussed in this paper. This research provides new insight and original information on the materials’ response to the autogenous laser welding, which will contribute to improving the knowledge on the ultra-thin lap-fillet welded similar and dissimilar steels.
- 2 March 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (3) , 89
Open AccessNew Insight into Mechanical, Microstructural and Failure Features of Lap-Fillet Autogenous Laser-Welded Similar and Dissimilar Joints of Ultra-Thin Steel Sheets
This research work addresses the mechanical and metallurgical characterisation, as well as the failure features, of two types of lap-fillet autogenous laser-welded joints made of ultra-thin sheets by applying an appropriate welding technology for producing sound welds and flawless joints. Both welded samples, one made only of stainless steel (SS-SS) sheets, and the other made of stainless steel and carbon steel (SS-CS) plates, were subjected to tensile–shear loads that are representative of the in-service conditions. The experimental research was focused on determining, by the digital image correlation (VIC-2D) method, the strain field and the rotation angle of the welded joints that were developed during loading tests of the welded specimens. Comparing to the classical testing method applied to study the joint overall mechanical properties, the novelty of this research consists of local mechanical behaviour assessment of relevant zones from similar and dissimilar welded joints, by using the innovative technique VIC-2D. Based on the analysis of the experimental results, it was found that the maximum rotation angle is 2.5 times higher in the SS-SS similar welded joint, in comparison with the SS-CS dissimilar welded joint. Despite this finding, the SS-CS specimen failed in the CS base material, far from the weld, with the failure phenomenon being preceded by the material yielding and necking. This failure mode is consistent with the detected strength mismatch of the SS-CS joint, with respect to the CS base material. In contrast, the quasi-ductile fracture of the SS-SS welded joint occurred by plastic exhaustion at the boundary between the narrow Heat-Affected Zone (HAZ) of SS and the Fuzion Zone (FZ). These outcomes are consistent with the hardness profile, microstructural heterogeneities found in the lap-fillet welded joints, and the load versus elongation curves that are determined and discussed in this paper. This research provides new insight and original information on the materials’ response to the autogenous laser welding, which will contribute to improving the knowledge on the ultra-thin lap-fillet welded similar and dissimilar steels.
- Open Access
- 27 October 2025
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 9 (11) , 351
On Combined Tensile-Shear Performance of Laser-Welded Dissimilar Overlap Joints Made of Austenitic Stainless Steel and Low-Carbon Steel
This paper addresses the mechanical characterization of dissimilar overlap joints made by autogenous laser welding between thin sheets of low-carbon steel (CS) and austenitic stainless steel (SS) with an optimized welding technology able to produce sound overlap joints. This involved applying the laser beam from the CS-side to reduce the SS overheating. The research is focused on the analysis of combined tensile-shear behavior of the weld and of the heat-affected zones. During testing, the applied tensile-shear load rotates the weld connecting the CS and SS plates. The rotation angle transmitted to the free ends of the plates, together with relevant strain fields, were measured by using a digital image correlation system, VIC-2D. Thus, it was found that the weld acts as a non-linear hinge which experiences a sudden loss of stiffness when strain concentrations develop from the weld ligament edges towards the loaded sides of the plates. The welded joint fails by yielding localization and necking in the CS plate, far from the weld. This mode of failure is a consequence of the weld and heat-affected zone strength mismatches of 1.09 and 1.33, respectively. These values are consistent with the hardness profile and the documented microstructural heterogeneities.
- 27 October 2025
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 9 (11) , 351
Open AccessOn Combined Tensile-Shear Performance of Laser-Welded Dissimilar Overlap Joints Made of Austenitic Stainless Steel and Low-Carbon Steel
This paper addresses the mechanical characterization of dissimilar overlap joints made by autogenous laser welding between thin sheets of low-carbon steel (CS) and austenitic stainless steel (SS) with an optimized welding technology able to produce sound overlap joints. This involved applying the laser beam from the CS-side to reduce the SS overheating. The research is focused on the analysis of combined tensile-shear behavior of the weld and of the heat-affected zones. During testing, the applied tensile-shear load rotates the weld connecting the CS and SS plates. The rotation angle transmitted to the free ends of the plates, together with relevant strain fields, were measured by using a digital image correlation system, VIC-2D. Thus, it was found that the weld acts as a non-linear hinge which experiences a sudden loss of stiffness when strain concentrations develop from the weld ligament edges towards the loaded sides of the plates. The welded joint fails by yielding localization and necking in the CS plate, far from the weld. This mode of failure is a consequence of the weld and heat-affected zone strength mismatches of 1.09 and 1.33, respectively. These values are consistent with the hardness profile and the documented microstructural heterogeneities.
- Open Access
- 3 October 2025
- Published by Universidad Politecnica de Madrid - University Library
Seguridad estructural de barras de acero de alta resistencia para la construcción en ambientes agresivos
The thesis addresses a critical aspect of the mechanical behavior of high-strength steel bars of lath martensitic microstructure, recently developed for highly demanding Civil Engineering applications related to Structural Integrity. The analyzed aspect was the bar steel resistance to fracture and to hydrogen-assisted cracking, i.e., crack growth under mechanical loading, in an inert medium and, in an aggressive environment, capable of steel embrittlement by hydrogen absorption. The research has focused on two complementary lines: experimental and theoretical. The experiments involved fracture tests according to BS-8571 in both environments using pre-cracked SENT tensile specimens extracted from the bars. The tests carried out in the aggressive medium were made by adapting the strain measurement system involving conventional extensometry into the BS-8571, to a computerized video extensometry system. The main experimental results were the applied load - CMOD and the J-integral - CMOD for each crack size tested. The shape of these curves suggested the use of cohesive crack as a possible theoretical model for predicting them. The theoretical prediction of the test curves from the Dugdale cohesive model required its application to the SENT specimens after previous determination of the crack faces displacement fields. The corresponding theoretical developments were carried out based on the Green's function proposed by Chell and the reciprocity theorem reformulated by Rice for cracked Hookean solids, and that allowed obtaining the test curves as function of crack size and the cohesive strength of the steel, as a material constant. These predictions reproduce the tests results with the cohesive strength as unique freedom degree, which leads to its determination by simple fitting. The comparison of cohesive strength values obtained for the inert medium and the aggressive environment allowed the quantitative assessment of the embrittlement effect, which causes a loss of cohesive strength exceeding 40%. This sensitivity to hydrogen embrittlement is perfectly consistent with the micromechanisms that produce it, namely HELP and HEDE, since the microscopic effects of both enhance the cohesive zone behavior. The HELP micromechanism localizes and intensifies plastic deformation, and the HEDE micromechanism reduces the local stress level required for this, favoring the loss of cohesion between the microstructural components. RESUMEN La tesis aborda un aspecto crítico del comportamiento mecánico de barras de acero de alta resistencia con microestructura martensítica de listones, recientemente desarrolladas para funciones de Ingeniería Civil muy comprometidas con la integridad estructural. El aspecto analizado es la resistencia del acero de las barras a la fractura y a la fisuración asistida por hidrógeno, es decir al crecimiento de fisuras por carga mecánica, tanto en ambiente inerte como en ambiente agresivo, capaz de fragilizar al acero por absorción de hidrógeno. La investigación se ha centrado en 2 vías complementarias, experimental y teórica respectivamente. Los experimentos han consistido en la realización de ensayos de fisuración según la norma BS-8571 en ambos ambientes con probetas de tracción de configuración SENT extraídas de las barras y prefisuradas. Los ensayos realizados en ambiente fragilizante han sido posibles mediante la adaptación del sistema de medida de deformaciones con extensometría convencional de la norma a un sistema de vídeo-extensometría computarizada. Los experimentos han propiciado la obtención de las curvas que relacionan la carga aplicada y la integral J con el CMOD para cada tamaño de fisura ensayado. La forma de estas curvas ha sugerido el uso de la fisura cohesiva como posible modelo teórico capaz de predecirlas. La predicción teórica de las curvas de ensayo a partir del modelo cohesivo de Dugdale ha requerido la aplicación del modelo a las probetas SENT previa determinación de los campos de desplazamiento de las caras de la fisura in-volucrados. Los desarrollos teóricos correspondientes se han realizado a partir de la función de Green propuesta por Chell y del teorema de reciprocidad reformulado por Rice para sólidos hookeanos fisurados, y han permitido deducir las curvas buscadas en función del tamaño de fisura y de la resistencia cohesiva del acero, como constante del material. Estas predicciones reproducen los resultados de los ensayos con la resistencia cohesiva como único grado de libertad, lo que conduce a su determinación por ajuste simple. La comparación de los valores de la resistencia cohesiva obtenidos para ambiente inerte y para ambiente fragilizante han permitido valorar cuantitativamente el efecto de la fragilización, que causa una pérdida de resistencia cohesiva superior al 40%. La sensibilidad de esta magnitud a la fragilización por hidrógeno es perfectamente consistente con los micromecanismos que la producen, HELP y HEDE, por cuanto los efectos microscópicos de ambos contribuyen a potenciar el comportamiento de la zona cohesiva. El micromecanismo HELP localiza e intensifica la deformación plástica, y el micromecanismo HEDE reduce el nivel tensional local necesario para ello, favoreciendo la pérdida de cohesión entre los componentes microestructurales.
- 3 October 2025
- Published by Universidad Politecnica de Madrid - University Library
Open AccessSeguridad estructural de barras de acero de alta resistencia para la construcción en ambientes agresivos
The thesis addresses a critical aspect of the mechanical behavior of high-strength steel bars of lath martensitic microstructure, recently developed for highly demanding Civil Engineering applications related to Structural Integrity. The analyzed aspect was the bar steel resistance to fracture and to hydrogen-assisted cracking, i.e., crack growth under mechanical loading, in an inert medium and, in an aggressive environment, capable of steel embrittlement by hydrogen absorption. The research has focused on two complementary lines: experimental and theoretical. The experiments involved fracture tests according to BS-8571 in both environments using pre-cracked SENT tensile specimens extracted from the bars. The tests carried out in the aggressive medium were made by adapting the strain measurement system involving conventional extensometry into the BS-8571, to a computerized video extensometry system. The main experimental results were the applied load - CMOD and the J-integral - CMOD for each crack size tested. The shape of these curves suggested the use of cohesive crack as a possible theoretical model for predicting them. The theoretical prediction of the test curves from the Dugdale cohesive model required its application to the SENT specimens after previous determination of the crack faces displacement fields. The corresponding theoretical developments were carried out based on the Green's function proposed by Chell and the reciprocity theorem reformulated by Rice for cracked Hookean solids, and that allowed obtaining the test curves as function of crack size and the cohesive strength of the steel, as a material constant. These predictions reproduce the tests results with the cohesive strength as unique freedom degree, which leads to its determination by simple fitting. The comparison of cohesive strength values obtained for the inert medium and the aggressive environment allowed the quantitative assessment of the embrittlement effect, which causes a loss of cohesive strength exceeding 40%. This sensitivity to hydrogen embrittlement is perfectly consistent with the micromechanisms that produce it, namely HELP and HEDE, since the microscopic effects of both enhance the cohesive zone behavior. The HELP micromechanism localizes and intensifies plastic deformation, and the HEDE micromechanism reduces the local stress level required for this, favoring the loss of cohesion between the microstructural components. RESUMEN La tesis aborda un aspecto crítico del comportamiento mecánico de barras de acero de alta resistencia con microestructura martensítica de listones, recientemente desarrolladas para funciones de Ingeniería Civil muy comprometidas con la integridad estructural. El aspecto analizado es la resistencia del acero de las barras a la fractura y a la fisuración asistida por hidrógeno, es decir al crecimiento de fisuras por carga mecánica, tanto en ambiente inerte como en ambiente agresivo, capaz de fragilizar al acero por absorción de hidrógeno. La investigación se ha centrado en 2 vías complementarias, experimental y teórica respectivamente. Los experimentos han consistido en la realización de ensayos de fisuración según la norma BS-8571 en ambos ambientes con probetas de tracción de configuración SENT extraídas de las barras y prefisuradas. Los ensayos realizados en ambiente fragilizante han sido posibles mediante la adaptación del sistema de medida de deformaciones con extensometría convencional de la norma a un sistema de vídeo-extensometría computarizada. Los experimentos han propiciado la obtención de las curvas que relacionan la carga aplicada y la integral J con el CMOD para cada tamaño de fisura ensayado. La forma de estas curvas ha sugerido el uso de la fisura cohesiva como posible modelo teórico capaz de predecirlas. La predicción teórica de las curvas de ensayo a partir del modelo cohesivo de Dugdale ha requerido la aplicación del modelo a las probetas SENT previa determinación de los campos de desplazamiento de las caras de la fisura in-volucrados. Los desarrollos teóricos correspondientes se han realizado a partir de la función de Green propuesta por Chell y del teorema de reciprocidad reformulado por Rice para sólidos hookeanos fisurados, y han permitido deducir las curvas buscadas en función del tamaño de fisura y de la resistencia cohesiva del acero, como constante del material. Estas predicciones reproducen los resultados de los ensayos con la resistencia cohesiva como único grado de libertad, lo que conduce a su determinación por ajuste simple. La comparación de los valores de la resistencia cohesiva obtenidos para ambiente inerte y para ambiente fragilizante han permitido valorar cuantitativamente el efecto de la fragilización, que causa una pérdida de resistencia cohesiva superior al 40%. La sensibilidad de esta magnitud a la fragilización por hidrógeno es perfectamente consistente con los micromecanismos que la producen, HELP y HEDE, por cuanto los efectos microscópicos de ambos contribuyen a potenciar el comportamiento de la zona cohesiva. El micromecanismo HELP localiza e intensifica la deformación plástica, y el micromecanismo HEDE reduce el nivel tensional local necesario para ello, favoreciendo la pérdida de cohesión entre los componentes microestructurales.
- Open Access
- 18 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (14) , 7998
Hydrogen Embrittlement and Cohesive Behavior of an Ultrahigh-Strength Lath Martensitic Steel of Tendon Bars for Structural Engineering
This paper assesses experimentally and theoretically the hydrogen-assisted cracking sensitivity of an ultrahigh-strength lath martensitic steel, recently used to manufacture tendon rods for structural engineering. The experimental values of the J-integral were obtained by tensile testing up to failure precracked SENT specimens in air, as an inert environment and in a thiocyanate aqueous solution, as a hydrogen-promoter medium. In parallel, the theoretical resources necessary to apply the Dugdale cohesive model to the SENT specimen were developed from the Green function in order to predict the J-integral dependency on the applied load and the crack size, with the cohesive resistance being the only material constant concerning fracture. The comparison of theoretical and experimental results strongly supports the premise that the cohesive crack accurately models the effect of the mechanisms by which the examined steel opposes crack propagation, both when in hydrogen-free and -embrittled conditions. The identification of experimental and theoretical limit values respectively involving a post-small-scale-yielding regime and unstable extension of the cohesive zone allowed for the value of the cohesive resistance to be determined, its condition as a material constant in hydrogen-free medium confirmed, and its strong decrease with hydrogen exposure revealed.
- 18 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (14) , 7998
Open AccessHydrogen Embrittlement and Cohesive Behavior of an Ultrahigh-Strength Lath Martensitic Steel of Tendon Bars for Structural Engineering
This paper assesses experimentally and theoretically the hydrogen-assisted cracking sensitivity of an ultrahigh-strength lath martensitic steel, recently used to manufacture tendon rods for structural engineering. The experimental values of the J-integral were obtained by tensile testing up to failure precracked SENT specimens in air, as an inert environment and in a thiocyanate aqueous solution, as a hydrogen-promoter medium. In parallel, the theoretical resources necessary to apply the Dugdale cohesive model to the SENT specimen were developed from the Green function in order to predict the J-integral dependency on the applied load and the crack size, with the cohesive resistance being the only material constant concerning fracture. The comparison of theoretical and experimental results strongly supports the premise that the cohesive crack accurately models the effect of the mechanisms by which the examined steel opposes crack propagation, both when in hydrogen-free and -embrittled conditions. The identification of experimental and theoretical limit values respectively involving a post-small-scale-yielding regime and unstable extension of the cohesive zone allowed for the value of the cohesive resistance to be determined, its condition as a material constant in hydrogen-free medium confirmed, and its strong decrease with hydrogen exposure revealed.
- Open Access
- 11 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11543
Fatigue, Fracture, and Damage Tolerance of Ultrahigh-Strength Martensitic Tendon-Rods for Structural Engineering
The paper addresses the fatigue resistance, fracture behavior, and damage tolerance of a new type of ultrahigh-strength bar for prestressing concrete made of a low-alloy lath martensitic steel. The fracture tests show that the bar steel has a medium-high fracture toughness of 75 MPa m1/2 and a fatigue cracking resistance that fits the Paris-Erdogan Law as most of Eurocode 3 structural steels. The damage tolerance analysis combines two failure assessment diagrams (FADs), the first focused on the damage level and the second on toughness and yielding capacity as material properties of the bar steel, whose influence and interaction are determinant for failure. The location of the experimental failure data in the FADs indicates that the steel is endowed with a combination of strength, ductility, and toughness able to prevent unexpected failures. The damage micro-mechanisms revealed from the examination of broken specimens differ from fatigue to fracture cracking, but in a manner consistent with the observed mechanical behavior and microstructure of the bar steel.
- 11 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11543
Open AccessFatigue, Fracture, and Damage Tolerance of Ultrahigh-Strength Martensitic Tendon-Rods for Structural Engineering
The paper addresses the fatigue resistance, fracture behavior, and damage tolerance of a new type of ultrahigh-strength bar for prestressing concrete made of a low-alloy lath martensitic steel. The fracture tests show that the bar steel has a medium-high fracture toughness of 75 MPa m1/2 and a fatigue cracking resistance that fits the Paris-Erdogan Law as most of Eurocode 3 structural steels. The damage tolerance analysis combines two failure assessment diagrams (FADs), the first focused on the damage level and the second on toughness and yielding capacity as material properties of the bar steel, whose influence and interaction are determinant for failure. The location of the experimental failure data in the FADs indicates that the steel is endowed with a combination of strength, ductility, and toughness able to prevent unexpected failures. The damage micro-mechanisms revealed from the examination of broken specimens differ from fatigue to fracture cracking, but in a manner consistent with the observed mechanical behavior and microstructure of the bar steel.
- Open Access
- 20 November 2024
- Published by MDPI AG in Preprints.org
Fatigue, Fracture and Damage Tolerance of Ultrahigh-Strength Martensitic Tendon-Rods for Structural Engineering
The paper addresses the fatigue resistance, fracture behavior and damage tolerance of a new type of ultrahigh-strength bar for prestressing concrete made of a low-alloy lath martensitic steel. The fracture tests showed that the bar steel has a medium-high fracture toughness of 75 MPa√m and a fatigue cracking resistance that fits the Paris-Erdogan Law as most of Eurocode 3 structural steels. The damage tolerance analysis combines two Failure Assessment Diagrams – FADs, respectively involving the damage level and the toughness, and yielding capacity influences on the failure of the bar steel. The location of the experimental failure data in the FADs indicate that the steel is endowed with a combination of strength, ductility and toughness able to prevent unexpected failures. The damage micro-mechanisms revealed from the examination of broken specimens differ from fatigue to fracture cracking, but in a manner consistent with the observed mechanical behavior and microstructure of the bar steel.
- 20 November 2024
- Published by MDPI AG in Preprints.org
Open AccessFatigue, Fracture and Damage Tolerance of Ultrahigh-Strength Martensitic Tendon-Rods for Structural Engineering
The paper addresses the fatigue resistance, fracture behavior and damage tolerance of a new type of ultrahigh-strength bar for prestressing concrete made of a low-alloy lath martensitic steel. The fracture tests showed that the bar steel has a medium-high fracture toughness of 75 MPa√m and a fatigue cracking resistance that fits the Paris-Erdogan Law as most of Eurocode 3 structural steels. The damage tolerance analysis combines two Failure Assessment Diagrams – FADs, respectively involving the damage level and the toughness, and yielding capacity influences on the failure of the bar steel. The location of the experimental failure data in the FADs indicate that the steel is endowed with a combination of strength, ductility and toughness able to prevent unexpected failures. The damage micro-mechanisms revealed from the examination of broken specimens differ from fatigue to fracture cracking, but in a manner consistent with the observed mechanical behavior and microstructure of the bar steel.
- 10 February 2024
- Published by Elsevier in Engineering Failure Analysis
- Vol. 159
Damage tolerance and collapse mechanism of failed prestressing steel strands in a 50-year-old urban viaduct
- 10 February 2024
- Published by Elsevier in Engineering Failure Analysis
- Vol. 159
Damage tolerance and collapse mechanism of failed prestressing steel strands in a 50-year-old urban viaduct