Fatigue, Fracture, and Damage Tolerance of Ultrahigh-Strength Martensitic Tendon-Rods for Structural Engineering
Open Access
- 11 December 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11543
Abstract
The paper addresses the fatigue resistance, fracture behavior, and damage tolerance of a new type of ultrahigh-strength bar for prestressing concrete made of a low-alloy lath martensitic steel. The fracture tests show that the bar steel has a medium-high fracture toughness of 75 MPa m1/2 and a fatigue cracking resistance that fits the Paris-Erdogan Law as most of Eurocode 3 structural steels. The damage tolerance analysis combines two failure assessment diagrams (FADs), the first focused on the damage level and the second on toughness and yielding capacity as material properties of the bar steel, whose influence and interaction are determinant for failure. The location of the experimental failure data in the FADs indicates that the steel is endowed with a combination of strength, ductility, and toughness able to prevent unexpected failures. The damage micro-mechanisms revealed from the examination of broken specimens differ from fatigue to fracture cracking, but in a manner consistent with the observed mechanical behavior and microstructure of the bar steel.Keywords
All Related Versions
Funding Information
- Ministerio de Ciencia e Innovación (RTI-2018-097221-B-I00, PRE-2019-088263)
- MCIN/AEI/10.13039/501100011033 and the “ESF Investing in Your Future” (RTI-2018-097221-B-I00, PRE-2019-088263)
This publication has 22 references indexed in Scilit:
- Estimating the remaining service life of in-situ grouted post-tension anchors using flaw tolerance limit plotsEngineering Failure Analysis, 2024
- Crystallographic analysis of fatigue fracture initiation in 8Ni-0.1C martensitic steelInternational Journal of Fatigue, 2021
- Effects of metallic microstructures on fatigue fracture of Q345 steelJournal of Iron and Steel Research International, 2020
- Measuring fatigue crack deflections via cracking of constituent particles in AA7050 via in situ x-ray synchrotron-based micro-tomographyInternational Journal of Fatigue, 2018
- Environment-assisted failure of structural tendons for construction and building applicationsConstruction and Building Materials, 2018
- New testing method for assessing the cracking sensibility of stressed tendon rods in aggressive environmentsEngineering Failure Analysis, 2016
- Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concreteConstruction and Building Materials, 2014
- Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutectoid pearlitic steel wireActa Materialia, 2012
- A critical review of stress intensity factor solutions for surface cracks in round bars subjected to tension loadingEngineering Failure Analysis, 2009
- Compliance calibration of the short rod chevron-notch specimen for fracture toughness testing of brittle materialsInternational Journal of Fracture, 1982