Agricultural tractor with different mass distributions between axles
Authors:
- Leonardo Leonidas KmiecikLKLeonardo Leonidas Kmiecik
- Samir Paulo JasperSJSamir Paulo Jasper
- Maira Laskoski PassosMPMaira Laskoski Passos
- Lauro Strapasson NetoLNLauro Strapasson Neto
- Gabriel Ganancini ZimmermannGZGabriel Ganancini Zimmermann
- Daniel SaviDSDaniel Savi
- Guilherme Luiz ParizeGPGuilherme Luiz Parize
Open Access
- 1 January 2023
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 53 (3)
Abstract
An adjustment of the agricultural tractor is necessary to achieve energy efficiency, which can be done through the correct distribution of mass between the axles for each operating surface. This research evaluated different distributions of mass between axles in a 93 kW tractor equipped with auxiliary front-wheel drive, on two soil surfaces. The experiment was carried out in strip design, with a double factorial scheme (2 x 3), with two soil surfaces (mobilized and firm) and three mass distributions between axes (35/65%, 40/60% and 45/55%), with five repetitions, totaling 30 parcels. The slippage parameters of the front and rear wheelset, engine rotation, hourly and specific fuel consumption, force, power and yield on the drawbar, displacement speed, engine thermal efficiency, traction coefficient, rolling resistance, and yield in traction. On firm soil, the energy performance of the tractor was superior in relation to the mobilized one, which allowed greater tractor and drawbar performance with lower specific fuel consumption. The use of a 35/65% between-axle mass distribution provided maximum traction for the mechanized set, resulting from the reduction in energy expenditure generated by skating and; consequently, the maximum use of the energy made available by the mechanized set. However, the maximum conversion of energy contained in the working fuel is obtained with the 45/55% setting.Keywords
This publication has 17 references indexed in Scilit:
- Feasibility of implementation of intelligent simulation configurations based on data mining methodologies for prediction of tractor wheel slipInformation Processing in Agriculture, 2019
- OTIMIZAÇÃO ENERGÉTICA DE UM TRATOR AGRÍCOLA UTILIZANDO NORMAS TÉCNICAS EM OPERAÇÕES DE GRADAGEMREVISTA ENGENHARIA NA AGRICULTURA - REVENG, 2018
- DYNAMIC TRACTION OF A MECHANIZED SET BASED ON TECHNICAL AND OPERATIONAL PARAMETERSEngenharia Agrícola, 2017
- Performance of tractor and tillage implements in clay soilJournal of the Saudi Society of Agricultural Sciences, 2017
- Tractor traction performance simulation on differently textured soils and validation: A basic study to make traction and energy requirements accessible to the practiceSoil and Tillage Research, 2017
- Air and fuel supercharge in the performance of a diesel cycle engineCiência Rural, 2017
- Computer simulations to maximise fuel efficiency and work performance of agricultural tractors in rotovating and ploughing operationsBiosystems Engineering, 2016
- Desempenho de um trator agrícola equipado com pneus radiais e diagonais com três níveis de lastros líquidosEngenharia Agrícola, 2011
- Influence of soil and tire parameters on tractionResearch in Agricultural Engineering, 2008
- Análise comparativa do peso específico dos tratores agrícolas fabricados no Brasil e seus efeitos sobre a seleção e usoCiência Rural, 2005