Flexible Shaft as Remote and Elastic Transmission for Robot Arms
Open Access
- 8 April 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (5) , 4790-4797
Abstract
Research on human-friendly robots focuses on safety through software and hardware. Hardware-based safety offers a significant advantage over software-based safety if an accurate hardware model is integrated into the solution. Design of elastic and off-joint actuation has established safety by hardware, where the inherent qualities of elastic and lightweight nature make the robot safe for interaction. Combining series elastic actuators with cable/belt pulley-based remote transmission offers inherently safe hardware design, albeit with increased design and modeling complexity. This letter introduces remote and elastic actuation as a single-element solution for robot arm design using a flexible shaft. The test-bench approach studies the remote and elastic effects of a flexible shaft-based transmission for a robot. A set of nine flexible shafts, differing in length and diameter, are used for benchmarking as 3-D surface empirical maps to facilitate their optimal selection for robot design. An example 3 Degree Of Freedom (DOF) robot arm using a flexible shaft as a remote and elastic actuator is designed and modeled. A low-level control based on a flexible shaft is proposed, backed by the experimental results.Keywords
Funding Information
- Fonds Wetenschappelijk Onderzoek (S001821N)
This publication has 19 references indexed in Scilit:
- A Flexible shaft-driven Remote and Torsionally Compliant Actuator (RTCA) for wearable robotsMechatronics, 2019
- Series and Parallel Elastic Actuation: Impact of natural dynamics on power and energy consumptionMechanism and Machine Theory, 2016
- Robots with Flexible Elements2016
- The flexible caterpillar based robotic colonoscope actuated by an external motor through a flexible shaftJournal of Mechanical Science and Technology, 2014
- Development of a robotic system with six-degrees-of-freedom robotic tool manipulators for single-port surgeryThe International Journal of Medical Robotics and Computer Assisted Surgery, 2014
- Investigation of safety in human-robot-interaction for a series elastic, tendon-driven robot arm2012
- The DLR FSJ: Energy based design of a variable stiffness joint2011
- Series elastic actuators2002
- Design and development of high-performance torque-controlled jointsIEEE Transactions on Robotics and Automation, 1995
- Mechanical Design for Whole-Arm Manipulation1993