AKAmin Khorasani

Amin Khorasani

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Amin Khorasani has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Uncontrolled collision dynamics and the role of dual motor actuators in impact mitigation

    by Amin Khorasani, Thierry Hubert, Nathan Desmedt, Raphaël Furnémont, Alexandre Girard, Bram Vanderborght, Tom Verstraten

  • Mechatronics Design and Preclinical Evaluation of ARASH ASiST: ARAS Haptic System for Eye Surgery Training

    by M. M. Nazeri Ardakani, K. A. Jafari, A. Hassani, A. Khorasani, M. R. Dindarloo, R. Heidari, M. Hassanpour, A. Hamzenava, H. Riazi-Esfahani, S. F. Mohammadi, et al.

    Vitreoretinal surgery demands phenomenal precision, dexterity, and steadiness—skills that push the limits of human motor control. Conventional training approaches, which depend on mentorship and subjective judgment, provide minimal opportunities for standardized evaluation or objective feedback. To address this, we present ARASH ASiST, a dual-user haptic platform aimed at enhancing surgical proficiency through force feedback and real-time performance evaluation. Central to its design is a parallelogram-based remote center of motion mechanism, crafted to deliver four degrees of freedom while enabling precise tool control within the intraocular space. A gravity compensation system, integrating topology optimization and counterweights, reduces the torque required for movement, enhancing stability and responsiveness. Further innovations include a high-precision force sensing system capable of distinguishing expertise levels, a laser-guided remote center of motion visualization tool for accurate anatomical alignment, and a real-time data acquisition framework for quantitative skill assessment. Preclinical evaluations with vitreoretinal surgeons confirmed the system’s effectiveness, demonstrating suitable ergonomic performance, enhanced control, and the ability to differentiate skill levels based on motion efficiency and force application. With the ongoing evolution of robotic and haptic systems in microsurgical training, ARASH ASiST represents a significant advancement toward an objective, data-driven framework for skill development in retinal surgery.


  • Effect of Virtual Mass and Time Delay on the Stability of Haptic Rendering

    by Ahmad Mashayekhi, Mehdi Shakeri, Amin Khorasani, Tom Verstraten

    Virtual mass simulation is one of the recent topics in the field of haptic devices (HDs), which can alter the apparent mass of the HD. Simulating negative values of virtual mass leads to a decrease in the apparent effective mass, improving transparency but weakening stability. Positive virtual mass rendering increases the apparent mass, reduces transparency, and enhances stability. This paper analyzes the stability of a haptic device while simulating a virtual environment consisting of a mass, spring, and damper in the presence of a constant time delay. The results are closed-form equations that can predict the stability boundary for small and even large values of virtual damping and time delay. These closed-form equations demonstrate that the maximum renderable virtual mass is twice the physical mass of the HD, and the minimum value equals its negative; both occur in the case of zero time delay. Increasing the time delay reduces both the minimum and maximum values of the renderable virtual mass. The study also shows that using virtual mass can improve the maximum value of a renderable virtual spring. The equations show that, in the absence of delay, properly tuning the virtual mass and virtual damping can enlarge the maximum renderable stiffness by up to 5.8 times in theory. In the experiments under time delay, the stiffness increased by a factor of 3.5, compared to the theoretical prediction of 4.1 times. The results further reveal situations where a nonzero minimum stiffness is required for stability. All findings are validated via simulations and experiments on a dedicated test bed.

  • Open Access

    Cobots Designed for Strength, Not Stiffness

    by Thierry Hubert, Amin Khorasani, Muhammad Usman, Hafsa Nouhi, Raphaël Furnémont, Bram Vanderborght, Greet Van De Perre, Tom Verstraten

    Conventional industrial robots are designed to be as stiff as possible to ensure high positioning accuracy. The stiffness of a structure is, however, strongly related to its mass, leading to heavy structures. This paper aims to quantify the potential gain of reducing and eliminating the stiffness constraints, which is of lesser importance for collaborative robots, by investigating the effect of applying different optimization objectives. The resulting optimized designs are quantitatively compared using a set of performance measures and evaluated against the traditional stiffness-designed approach. It was concluded that significant improvements can be made, e.g. the robot’s mass can be reduced up to 74% compared to traditionally stiff-designed robots. The dependency of the payload as well as the structural/actuator mass distribution on the optimized results is investigated and proved to have a significant influence on the potential improvements when allowing reduced structural rigidity. The relationship between structural mass and actuator mass is investigated and compared to commercially available cobots.


  • Open Access

    Vibration Control and Performance Analysis of a 3DOF High-Payload Flexible Link Manipulator

    by Thierry Hubert, Amin Khorasani, Muhammad Usman, Hafsa Nouhi, Raphaël Furnémont, John Lataire, Bram Vanderborght, Greet van de Perre, Tom Verstraten

    Flexible link manipulators (FLMs) are often praised for their potential advantages in industrial settings, such as being more lightweight, energy-efficient, and allowing higher operation speeds with smaller actuators. Many studies make unrealistic assumptions, like simplistic links, small deflections, low payloads, limited degrees of freedom, and well-defined mode shapes, which limit their real-world applicability. This paper investigates the performance of a flexible link manipulator with three degrees of freedom, designed for high payload capabilities and characterized by complex link shapes and complex vibration modes. An advanced control methodology was developed following the identification of the parameter-varying flexible link manipulator setup to manage the manipulator’s vibrations effectively. Comparative experiments were conducted between the flexible link manipulator and a conventional rigid link manipulator, assessing performance metrics such as repeatability, overshoot, settling time, torque and energy consumption. The results show that the flexible link manipulator, equipped with the advanced control system, achieves a repeatability of 0.14 mm, comparable to that of commercially available rigid robots. Moreover, energy consumption is reduced even with the implementation of active vibration suppression. The study highlights the potential of flexible link manipulators for real-world applications.


  • Stability Analysis of a Dual-Rate Haptic System: A New Closed-Form Solution

    by Ahmad Mashayekhi, Oumaima Akhif, Amin Khorasani, Tom Verstraten

    Haptic devices (HDs) play a vital role in simulating the sense of touch in various virtual environments (VEs). Ensuring stable interaction between the HD and the VE is critical, particularly when simulating stiff virtual objects. One approach to enhancing stability is increasing the sampling rate; however, excessively high rates can compromise velocity information, thereby reducing damping stability. Dual-rate haptic devices address this issue by sampling position at higher rates and velocity at lower rates. This paper presents a novel closed-form equation for predicting the stability boundary of a dual-rate HD without restrictions on time delay or virtual damping. The proposed equation, which depends on the physical parameters of the HD and VE, sampling times, and time delay, is validated through simulations and experiments.


  • Open Access

    A Hybrid Parameters Estimation Approach for Power Consumption Modeling of Ground Mobile Robots With Unknown Payload

    by Parham Haji Ali Mohamadi, Amin Khorasani, Tom Verstraten, Bram Vanderborght

    Typically, batteries are the main power source for mobile robots, and the practical constraints in carrying them pose challenges in achieving efficiency, autonomy, and safety objectives in robotic missions. Moreover, dealing with battery degradation requires a precise understanding of energy consumers' behavior in the system. Therefore, establishing an energy consumption model has an important role in addressing these challenges. This study focuses on the modeling and estimation of power consumption in indoor ground mobile robots with unknown payloads. We investigate key components and parameters that influence the actuation energy consumption of ground mobile robots equipped with DC motors, particularly in the context of pure rolling without slipping. To estimate the actuation power consumption of ground mobile robots, we present a hybrid parameters estimation approach. This method includes an offline step for estimating the mass‐decoupled coefficients of a power model, followed by two online steps for estimating the robot's unknown payload and its actuation power consumption. Simulation and experimental results with a differential drive robot (Turtlebot3) validate the effectiveness of the proposed approach. Additionally, the performance of the proposed power consumption estimation method is compared with two other data‐driven models based on multivariate linear regression and multilayer perceptron neural networks. The results demonstrate that the proposed method provides improved power consumption estimation accuracy on the selected indicators compared to the others. We also emphasize the importance of balancing the accuracy of power consumption estimation with its associated costs in the context of the proposed approach. This extra cost includes the energy needed for additional data measurement and processing. Considering this trade‐off is crucial for the practical implementation and resource optimization in robotic systems.


  • Open Access

    Mitigating Collision Forces and Improving Response Performance in Human-Robot Interaction by Using Dual-Motor Actuators

    by Amin Khorasani, Muhammad Usman, Thierry Hubert, Raphaël Furnémont, Dirk Lefeber, Bram Vanderborght, Tom Verstraten

    In collaborative robotics, the safety of humans interacting with cobots is crucial. There is a need for collaborative robots that can move quickly while still being safe. This letter introduces the use of a kinematically redundant actuator in impedance control mode to reduce collision forces, aiming to improve both the safety and efficiency of collaborative robots. By distributing power across multiple drive-trains, each with unique properties such as reflected inertia, the actuator's behavior during collisions is optimized, which is key for safe interactions. Using theoretical analysis and practical experiments, we evaluate the response performance of the redundant actuator in various collision situations according to ISO/TS 15066, comparing it with that of a standard single-drive actuator. Our experiments show that the redundant actuator significantly lowers collision forces, with a 44% reduction in peak forces and an 81% decrease in transferred impulses during collisions. The letter concludes by offering a design parameter recommendation for designing actuators with reduced reflected inertia.


  • Open Access

    Modeling of flexible shaft for robotics applications

    by Muhammad Usman, Amin Khorasani, Thierry Hubert, Raphaël Furnémont, Bram Vanderborght, Dirk Lefeber, Greet Van de Perre, Tom Verstraten


  • Open Access

    Flexible Shaft as Remote and Elastic Transmission for Robot Arms

    by Muhammad Usman, Thierry Hubert, Amin Khorasani, Raphaël Furnémont, Bram Vanderborght, Dirk Lefeber, Greet Van de Perre, Tom Verstraten

    Research on human-friendly robots focuses on safety through software and hardware. Hardware-based safety offers a significant advantage over software-based safety if an accurate hardware model is integrated into the solution. Design of elastic and off-joint actuation has established safety by hardware, where the inherent qualities of elastic and lightweight nature make the robot safe for interaction. Combining series elastic actuators with cable/belt pulley-based remote transmission offers inherently safe hardware design, albeit with increased design and modeling complexity. This letter introduces remote and elastic actuation as a single-element solution for robot arm design using a flexible shaft. The test-bench approach studies the remote and elastic effects of a flexible shaft-based transmission for a robot. A set of nine flexible shafts, differing in length and diameter, are used for benchmarking as 3-D surface empirical maps to facilitate their optimal selection for robot design. An example 3 Degree Of Freedom (DOF) robot arm using a flexible shaft as a remote and elastic actuator is designed and modeled. A low-level control based on a flexible shaft is proposed, backed by the experimental results.