Regenerated Bragg Grating Sensor Array for Temperature Measurements During an Aluminum Casting Process
- 16 May 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 18 (13) , 5352-5360
Abstract
An array of regenerated fiber Bragg gratings (RFBGs) was employed to monitor the temperature distribution during an aluminum cast process. Significant temperature gradients in the cast part were observed during the cooling and solidification period. The direction and velocity of the solidification front was revealed by the temperature data obtained by the RFBGs at different measurement points. A generalized calibration curve was established and applied to the RFBG array, avoiding the need of individual calibration measurements of each sensor element of the array. Temperatures measured using the RFBGs and a thermocouple placed in a reference arm of the mold showed excellent agreements and indicated that no thermal drift of the RFBGs sensor elements occurred during the casting. The RFBG measurements were carried out with only a single fiber, which reduced the amount of lead cables in the melt and hence minimized the sensor-induced disturbances to the casting process. In addition, the limited number of cables enables the RFBG sensors to be deployed in small and complex cast geometries. Multipoint temperature sensors based on RFBG arrays can become important tools to improve the quality of casting processes.Keywords
Funding Information
- Deutsche Forschungsge-meinschaft (RO 4145/3-1, KO 2111/11-1, VO 1487/11-1)
This publication has 25 references indexed in Scilit:
- The Study of Phase Transformations of AlSi9Cu3 Alloy by DSC MethodArchives of Foundry Engineering, 2016
- Multiplexed regenerated fiber Bragg gratings for high-temperature measurementMeasurement Science and Technology, 2013
- 9000 hours-long high temperature annealing of regenerated fiber Bragg gratings2013
- Encapsulated fiber Bragg grating sensor for high temperature measurementsOptical Engineering, 2011
- Packaged Optical Sensors Based on Regenerated Fiber Bragg Gratings for High Temperature ApplicationsIEEE Sensors Journal, 2011
- Regenerated gratingsJournal of the European Optical Society-Rapid Publications, 2009
- Ultrahigh-temperature regenerated gratings in boron-codoped germanosilicate optical fiber using 193 nmOptics Letters, 2008
- Review of the present status of optical fiber sensorsOptical Fiber Technology, 2003
- Simultaneous Measurement of Temperature and Strain Using Two Fiber Bragg Gratings Embedded in a Glass TubeOptical Fiber Technology, 1997
- Decay of ultraviolet-induced fiber Bragg gratingsJournal of Applied Physics, 1994