Real-time implementation of synthetic aperture vector flow imaging on a consumer-level tablet
- 1 September 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
In this work, a 2-D vector flow imaging (VFI) method based on synthetic aperture sequential beamforming (SASB) and directional transverse oscillation is implemented on a commercially available tablet. The SASB technique divides the beamforming process in two parts, whereby the required data rate between the probe and back-end can be reduced by a factor of 64 compared to conventional delay-and-sum focusing. The lowered data rate enables real-time wireless transfer for both B-mode and VFI data. In the present setup, element data were acquired from a straight vessel with the SARUS research scanner and processed by a first-stage beamformer in a fixed focus. The data were subsequently transferred to an HTC Nexus 9 tablet through an ASUS RT-AC68U Wi-Fi router to simulate a wireless probe. The second-stage beamforming of the B-mode and flow data and the velocity estimation were implemented on the tablet's built-in GPU (Nvidia Tegra K1) through the OpenGL ES 3.1 API. Real-time performance was achieved with rates up to 26 VFI frames per second (38 ms/frame) for concurrent processing and Wi-Fi transmission.Keywords
This publication has 17 references indexed in Scilit:
- Directional Transverse Oscillation Vector Flow EstimationIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2017
- System-Level Design of an Integrated Receiver Front End for a Wireless Ultrasound ProbeIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2016
- Synthetic Aperture Sequential Beamforming implemented on multi-core platforms2014
- Implementation of synthetic aperture imaging on a hand-held device2014
- SARUS: A synthetic aperture real-time ultrasound systemIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2013
- Synthetic aperture flow imaging using dual stage beamforming: Simulations and experimentsThe Journal of the Acoustical Society of America, 2013
- Sequential beamforming for synthetic aperture imagingUltrasonics, 2013
- Design and implementation of a smartphone-based portable ultrasound pulsed-wave doppler device for blood flow measurementIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2012
- A study of synthetic-aperture imaging with virtual source elements in B-mode ultrasound imaging systemsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2000
- Computing the discrete-time "analytic" signal via FFTIEEE Transactions on Signal Processing, 1999