Interleaving carbon‐glass veils in glass epoxy composite for enhanced fracture toughness and interlaminar shear strength—A hybrid approach
- 6 May 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (12) , 10654-10665
Abstract
The present study investigates the mode‐II fracture resistance and interlaminar shear strength (ILSS) in glass epoxy laminates with the aid of glass‐carbon veils hybrid interleaving technique. Hybrid interleaves were prepared using various areal densities of non‐woven carbon and glass veils. Two methods, specifically inter‐ply and inter‐weaved ply interleaved glass epoxy composite laminates were manufactured by hand layup technique. End notch flexural and short beam test specimens were tested to estimate the mode‐II fracture resistance and ILSS. Test results indicated that the interleaved with inter‐weaved veil composite exhibited ~58% to ~82% and ~13% to ~61% enhancement for inter‐ply veil composite laminates when compared to plain samples. In context with the short beam test, a significant enhancement of approximately 23% in ILSS was noticed for the plain inter‐weaved veil constructed with a lower areal density of the carbon veil. Finally, the plain inter‐weaved interleaving technique has a prominent role in enhancing the resistance to fracture and shear strength in Glass epoxy laminates. Further, the fracture mechanisms of non‐interleaved and hybrid ply interleaved composite laminates were observed by scanning electron microscopic images.Highlights: Interleaving non‐woven microfiber veil is the most promising and cost‐effective strategy to enhance the Interlayer toughness and strength. Interleaving techniques used in this investigation have a significant effect on interlaminar fracture toughness (IFT) and interlaminar shear strength (ILSS). The areal density of high‐modulus carbon veil showed a different phenomenal influence on IFT and ILSS.Keywords
Funding Information
- Deanship of Scientific Research, King Khalid University (RGP2/415/44)
This publication has 36 references indexed in Scilit:
- Interlaminar fracture toughness of carbon/epoxy composites laminates toughened by short carbon fiberPolymer Composites, 2023
- Post‐curing and fiber hybridization effects on mode‐II interlaminar fracture toughness of glass/carbon/epoxy compositesPolymer Composites, 2023
- Simultaneously improve the mode II interlaminar fracture toughness, flexural properties, and impact strength of CFRP composites with short aramid fiber interlaminar tougheningPolymer Composites, 2022
- Effects of midplane carbon nanotube sheet interleave on the strength and impact damage resistance of carbon fiber reinforced polymer compositesPolymer Composites, 2022
- Mode II interlaminar fracture toughness enhancement of fine z‐pin reinforced carbon fiber composite with low fraction of pinsPolymer Composites, 2022
- Multifunctional nickel‐coated carbon fiber veil for improving both fracture toughness and electrical performance of carbon fiber/epoxy composite laminatesPolymer Composites, 2021
- Enhanced interlaminar shear and impact performance of woven carbon/epoxy composites interleaved with needle punched high performance polyethylene fiber nonwovenJournal of Applied Polymer Science, 2021
- Mechanical properties of electrospun nanofiber reinforced/interleaved epoxy matrix composites—A reviewPolymer Composites, 2020
- Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide‐6,6 electrospun nanofibersJournal of Applied Polymer Science, 2017
- Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibersCarbon, 2012