Influence of Disc Tip Geometry on the Aerodynamic Performance and Flow Characteristics of Multichannel Tesla Turbines
Open Access
Abstract
As a competitive small-scale turbomachinery option, Tesla turbines have wide potential in various fields, such as renewable energy generation systems and small power equipment. This paper investigates the influence of disc tip geometry, including its profile and relative height, on the aerodynamic performance and flow characteristics of one-to-one and one-to-many multichannel Tesla turbines. The results indicate that compared to the turbine with blunt tips, the isentropic efficiency of the one-to-one turbine with sharp tips has a little decrease, which is because the relative tangential velocity gradient near the rotational disc walls decreases a little and additional vortices are generated at the rotor inlet, while that of the one-to-many turbine with sharp tips increases significantly, resulting from an increase in the relative tangential velocity in the disc channels and a decrease in the low Mach number and vortex area; for instance the turbine efficiency for the former relatively decreases by 3.6% and that for the latter increases by 13.5% at 30,000 r/min. In addition, the isentropic efficiency of the one-to-many turbine with sharp tips goes up with increasing relative height due to increasing improvement of flow status, and its increment rate slows down. A circular or elliptic tip performs better with lower relative height and a triangular tip behaves better with higher relative height. To sum up, a blunt disc tip is recommended for the one-to-one turbine, and a sharp disc tip is for the one-to-many turbine. The relative height and tip profile of the one-to-many turbine should be determined according to their effects on turbine performance, manufacturing difficulty and mechanical deformation.Keywords
Funding Information
- National Natural Science Foundation of China (51376143)
This publication has 29 references indexed in Scilit:
- Estimation of turbulent natural convection in horizontal parallel plates by the Q criterionInternational Communications in Heat and Mass Transfer, 2013
- The fluid dynamics of the rotating flow in a Tesla disc turbineEuropean Journal of Mechanics - B/Fluids, 2013
- A theory of Tesla disc turbinesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2012
- Assessment of Tesla Turbine Performance for Small Scale Rankine Combined Heat and Power SystemsJournal of Engineering for Gas Turbines and Power, 2010
- Experiment and analysis for an improved design of the inlet and nozzle in Tesla disc turbinesProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2010
- The design of a test rig and study of the performance and efficiency of a Tesla disc turbineProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2009
- Characterisation of a small viscous flow turbineExperimental Thermal and Fluid Science, 2008
- On Scaling Down Turbines to Millimeter SizeJournal of Engineering for Gas Turbines and Power, 2008
- A flow-visualization study of transition in plane Poiseuille flowJournal of Fluid Mechanics, 1982
- An Analytical and Experimental Investigation of Multiple-Disk TurbinesJournal of Engineering for Power, 1965