Abstract
Indoor particulate matter exposure has become a critical global health concern, and filter-based air cleaners have been widely used. However, it has critical shortcomings regarding frequent filter replacement and high energy consumption caused by the pressure drop across the filter. Electrostatic precipitator-based cleaners are a promising alternative, and the ion-spray configuration offers low pressure drop and low ozone emission. Therefore, we designed and evaluated an ion-spray ESP to maximize the clean air delivery rate (CADR). Although the local ion concentration differed by four orders of magnitude between a near-source and a far zone, the 8.3 m3 min-1 non-metal-frame lab device in a 30 m3 chamber achieved similar CADRs of 7.44 and 7.24 m3 min-1. The metal-frame CADR ranged from 5.6 to 7.4 m3 min-1 with ionizer length (0.4–15 cm) and from 5.9 to 7.1 m3 min-1 with tilt angle (0–90°), whereas the non-metal-frame CADR remained essentially constant at approximately 7.3 m3 min-1 regardless of geometry. The 40 m3 min-1 metal-frame pilot device in a 300 m3 chamber reached 29 m3 min-1 CADR at 0° tilt, and average CADRs were 23.8 m3 min-1. In addition, the ion-spray ESP exhibited a pressure drop of 13.5 Pa, which was 3.5-fold lower than that of the HEPA filter, and an ozone emission below 2 ppb. Therefore, the ion-spray ESP is expected to be an efficient low-energy, low-ozone air-cleaning system for improving indoor air quality in large spaces, offering a promising alternative to conventional filter- and two-stage ESP-based cleaners.