Position Signal and Nonconduction Phase Current Based Fault Diagnosis Method of Position Sensor for Doubly Salient Electromagnetic Motor
- 10 April 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (7) , 8572-8584
Abstract
Reliable rotor position information is essential for accurate commutation control of motor drive system. Traditionally, hall sensors have been widely used to obtain rotor position information. The fault of position sensor will lead to the confusion of the commutation logic, which will reduce the output torque of the motor and even fail to operate normally. Therefore, fault diagnosis of position sensor is the key technology to improve the reliability of the system. In this article, a fault diagnosis method of position sensor is proposed for doubly salient electromagnetic motor (DSEM) drive system, which only needs the existing position signals, the driving signals of switch, and the nonconduction phase current. Compared with the existing method, the proposed method does not require additional hardware and complex calculation, can realize the fault diagnosis of single, two and three position sensors, and is not influenced by the variation of speed and load. Besides, the time of error commutation for the proposed method is less than 1/3 electrical angle period, which is helpful to switch the fault-tolerant strategy in time and minimize the damage to the system caused by the fault. In order to verify the effectiveness of the proposed method, experiments are carried out on a 12/8 pole DSEM equipped with three hall position sensors. The experimental results under both steady and dynamic conditions show that the proposed method can quickly realize fault location.Keywords
Funding Information
- National Natural Science Foundation of China (51737006)
This publication has 16 references indexed in Scilit:
- Online Adaptive Maximum Torque Per Ampere Control for Doubly Salient Electromagnetic MachineIEEE Transactions on Energy Conversion, 2023
- Synthetic Hybrid-Integral-Threshold Logic-Based Position Fault Diagnosis Scheme for SRM DrivesIEEE Transactions on Instrumentation and Measurement, 2020
- Investigation of a Fault-Tolerant Control Method for a Multiport Dual-Stator Doubly Salient Electromagnetic Machine DriveIEEE Transactions on Industrial Electronics, 2018
- Research on control strategies for doubly salient electromagnetic machineIET Electric Power Applications, 2017
- Torque Density Improvement of Doubly Salient Electromagnetic Machine With Asymmetric Current ControlIEEE Transactions on Industrial Electronics, 2016
- Improved Fault-Tolerant Control for Brushless Permanent Magnet Motor Drives With Defective Hall SensorsIEEE Transactions on Energy Conversion, 2016
- Fault Diagnosis and Signal Reconstruction of Hall Sensors in Brushless Permanent Magnet Motor DrivesIEEE Transactions on Energy Conversion, 2015
- Dual Voltage Supply Converter for High-Speed Doubly Salient Reluctance MotorsIEEE Transactions on Power Electronics, 2013
- Filtering of Hall-Sensor Signals for Improved Operation of Brushless DC MotorsIEEE Transactions on Energy Conversion, 2012
- Modeling, Detection, and Disambiguation of Sensor Faults for Aerospace ApplicationsIEEE Sensors Journal, 2009