Hydraulic and Structural Assessment of a Rubble-Mound Breakwater with a Hybrid Wave Energy Converter
Open Access
- 25 August 2021
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (9) , 922
Abstract
Seaports’ breakwaters serve as important infrastructures capable of sheltering ships, facilities, and harbour personnel from severe wave climate. Given their exposure to ocean waves and port authorities’ increasing awareness towards sustainability, it is important to develop and assess wave energy conversion technologies suitable of being integrated into seaport breakwaters. To fulfil this goal whilst ensuring adequate sheltering conditions, this paper describes the performance and stability analysis of the armour layer and toe berm of a 1/50 geometric scale model of the north breakwater extension project, intended for the Port of Leixões, with an integrated hybrid wave energy converter. This novel hybrid concept combines an oscillating water column and an overtopping device. The breakwater was also studied without the hybrid wave energy device as to enable a thorough comparison between both solutions regarding structural stability, safety, and overtopping performance. The results point towards a considerable reduction in the overtopping volumes through the integration of the hybrid technology by an average value of 50%, while the stability analysis suggests that the toe berm of the breakwater is not significantly affected by the hybrid device, leading to acceptable safety levels. Even so, some block displacements were observed, and the attained stability numbers were slightly above the recommended thresholds from the literature. It is also shown that traditional damage assessment parameters should be applied with care when non-conventional structures are analysed, such as rubble-mound breakwaters with integrated wave energy converters.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia (OCEANERA/0003/2016 and OCEANERA/0004/2016)
- OCEANERA-NET (OCEANERA/0003/2016 and OCEANERA/0004/2016)
- European Regional Development Fund (EAPA_784/2018)
- OCEANERA-NET COFUND (OCEANERA/0004/2019)
This publication has 42 references indexed in Scilit:
- WAVE OVERTOPPING AT BERM BREAKWATERS IN LINE WITH EUROTOPCoastal Engineering Proceedings, 2012
- RUBBLE MOUND BREAKWATER OVERTOPPING: ESTIMATION OF THE RELIABILITY OF A 3D NUMERICAL SIMULATIONCoastal Engineering Proceedings, 2012
- The new wave overtopping database for coastal structuresCoastal Engineering, 2009
- Overtopping performance of different armour units for rubble mound breakwatersCoastal Engineering, 2009
- Crest level assessment of coastal structures — General overviewCoastal Engineering, 2009
- Numerical analysis of wave overtopping of rubble mound breakwatersCoastal Engineering, 2008
- Wave height parameter for damage description of rubble-mound breakwatersCoastal Engineering, 2006
- Field measurements of wave overtopping at the rubble mound breakwater of Rome–Ostia yacht harbourCoastal Engineering, 2005
- Wave overtopping at vertical and steep seawallsMaritime Engineering, 2005
- Full-scale wave-overtopping measurements on the Zeebrugge rubble mound breakwaterCoastal Engineering, 2004