Abstract
In this study, we demonstrate a novel magneto-optical thermometer using a Magneto-optical Kerr Effect (MOKE) system optimally configured with a photoelastic modulator (PEM) that combines the optical and pyro effects of Fe-Gd nanofilm to detect transient surface temperatures with high sensitivity and temporal resolution. The AC-DC harmonic ratio of the modulating frequency senses the temperature-induced Kerr signal of the metal film. In previous MOKE systems using a PEM, the optical axis of the analyzer was configured at 45° to maximize the harmonic amplitude. However, the decreased sensitivity of the harmonic ratio in this conventional configuration leads to lower signal-to-noise ratios (SNRs). By configuring the analyzer axis at a near-extinction position close to 0°, the signal gain of the harmonic ratio can be increased, thus significantly improving the SNRs of the temperature measurement. Experimental results based on near-extinction photoelastic modulated MOKE (NEPEM MOKE) of Fe-Gd nanofilm show that the harmonic ratio achieves a resolution better than 0.02 K over a wide range, from room temperature to the Curie temperature of Fe-Gd nanofilm. On this basis, the magneto-optical thermometer can capture thermal pulses with a pulse width of no less than 80 μs. The proposed method combines the high spatial and temporal resolution of the MOKE, which converts temperature changes into magneto-optical signal changes. Therefore, this noninvasive magneto-optical thermometer provides a possible method for temperature measurements on the micro- and nanometer scales.
Funding Information
  • National Key Research and Development Program of China (2022YFE0107500, 2022YFE0204700)
  • Shenzhen Municipal Scientific Program (JCYJ20200109110612375, JCYJ20210324142004012)
  • Department of Science and Technology of Hubei Province (2023BCB011)

This publication has 36 references indexed in Scilit: