Impact of Contamination on AC Flashover Performance of Contact Network Insulators Under High-Fouling Tunnel Conditions
- 28 October 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 33 (2) , 1400-1410
Abstract
The semi-enclosed environment of railway tunnels intensifies the accumulation of natural contamination on insulating surfaces. However, the natural contamination and flashover characteristics of railway tunnel insulators are underexplored. This study investigates the accumulation of contamination on railway tunnel insulators, focusing on equivalent salt deposit density (ESDD), non-soluble deposit density (NSDD), the NSDD/ESDD ratio (KN/E), and contamination non-uniformity (K). The chemical composition, particle size, and insoluble components of contamination are also analyzed. Results show peak contamination at tunnel entrances/exits. ESDD ranges from 0.1 to 1.1 mg/cm2, and NSDD from 2 to 18 mg/cm2, with larger particles (>10 μm) concentrated at entrances/exits. Compared to other regions, the KN/E ratio inside the tunnel (1.7-23.4) is higher, and tunnel contamination is E level (nonuniformity KESDD: 1/2.19-1/1.44), while external contamination is typically B level due to rainfall. The study examines the effects of pressure, ESDD, and K on flashover voltage, with multi-factor ANOVA showing ESDD as the dominant factor, with the strongest interaction between ESDD and pressure. Compared to different shed parameters, the optimal S/L ratio for flashover performance ranges from 1.55 to 1.77, with larger ratios (1.77) suited for light pollution environments and smaller ratios (1.55) for heavy pollution. Additionally, insoluble components like metal oxides and carbon reduce flashover voltage and increase leakage current by shortening the creepage distance and enhancing conductivity and arc stability. These findings offer key insights for external insulation configuration, designing, and artificial contamination testing in high-altitude railway tunnels.Keywords
Funding Information
- National Natural Science Foundation of China (52477161)
This publication has 16 references indexed in Scilit:
- Impact of high-altitude environments on the motion and settling characteristics of wet-mix shotcrete dust in tunnelsTunnelling and Underground Space Technology, 2024
- Analysis of within-pen and between-pen fenceline temporal contact networks in confined feedlot cattlePreventive Veterinary Medicine, 2024
- Flashover voltage and external insulation design for EMUs’ insulators at high altitude with non‐uniform distributed pollutionIET Generation, Transmission & Distribution, 2023
- The Influence of Uneven Pollution Distribution on the Electrical and Thermal Characteristics of Insulators2023
- Experimental study on the contamination deposition characteristics of insulators in a fog–haze environmentIET Generation, Transmission & Distribution, 2017
- Pollution accumulation characteristics of insulators under natural rainfallIET Generation, Transmission & Distribution, 2017
- A simulation method for winter pollution contamination of HV insulators2011
- Effects of Wind Velocity on Contamination of HV Insulators in Winter Conditions2008
- Study on Insulator Natural Contamination Trend under Different Physiognomies of Local Area2008
- Natural insulator contamination test results on various shed shapes in heavy industrial contamination areasIEEE Transactions on Electrical Insulation, 1992