Examination of the parameters effect on Al-Cu FSW welded butt joints using formability consent
Open Access
- 22 June 2024
- journal article
- Published by Mesopotamian Academic Press - DIGITAL COMMONS JOURNALS in Babylonian Journal of Mechanical Engineering
- Vol. 2024, 34-48
Abstract
In most applications, joining aluminum to copper using friction stir welding (FSW) is a primary manufacturing process followed by secondary forming processes. The aim of this study is to investigate the effect of FSW process parameters (speed and feed rate) on the formability of Al-Cu joints. Aluminum and copper blanks were welded at three different rotational speeds, i.e., 910, 1280, and 1700 rpm, and three different feed rates, i.e., 16, 29, and 44 mm/min. The base metals used in this study were aluminum (Al-1050) and copper in two states, i.e., as received and annealed. The mechanical properties of the base metals and the produced compounds were evaluated by tensile and hardness tests. The aluminum-copper joints were drawn into flangeless U-shape and cup shape using FSW to examine the formability of the joints. The maximum tensile load, punch load, and forming index were obtained when Al was at 1700 rpm and 16 mm/min, i.e., h. The welding was performed with annealed copper at the highest rotational speed and lowest feed rate due to work hardening of the joint. However, the ductility was highest at 1280 rpm and 44 mm/min, i.e., at medium rotation and highest travel speed. It can be depicted that when the FSW Al-Cu joint is further used in the forming process, moderate rotation and high feed speed should be adopted for welding to avoid work hardening and improve the ductility of the joint.Keywords
This publication has 30 references indexed in Scilit:
- Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian methodThe International Journal of Advanced Manufacturing Technology, 2021
- Optimum combination of rotational and welding speeds for welding of Al/Cu-butt joint by friction stir weldingThe International Journal of Advanced Manufacturing Technology, 2020
- Joining of magnesium and aluminum alloys via ultrasonic assisted friction stir welding at low temperatureThe International Journal of Advanced Manufacturing Technology, 2018
- Friction stir butt welding thin aluminum alloy sheetsThe International Journal of Advanced Manufacturing Technology, 2018
- Experimental investigation of formability of Al-1050 tailor-welded blanksThe International Journal of Advanced Manufacturing Technology, 2016
- Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperatureThe International Journal of Advanced Manufacturing Technology, 2016
- Formability of Friction Stir-Welded Blanks with Different Thickness RatiosMetallurgical and Materials Transactions A, 2016
- A study on the formability of aluminum tailor welded blanks produced by friction stir weldingThe International Journal of Advanced Manufacturing Technology, 2015
- Microstructural aspects in Al–Cu dissimilar joining by FSWThe International Journal of Advanced Manufacturing Technology, 2015
- Weldment properties evaluation and formability study of tailor-welded blanks of different thickness combinations and welding orientationsJournal of Materials Science, 2007