AAAyman Ali Abd-Eltwab

Ayman Ali Abd-Eltwab

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ayman Ali Abd-Eltwab has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical and Experimental Study into forming of the longitudinal Externally Spline Sleeves by internally rotary Ballizing Process

    by Ayman Ali Abd-Eltwab, Emad A. Fahmy, Mohamed N. El-Sheikh, Ahmed M. I. Abu-Oqail, Hammad T. Elmetwally, Eman S. M. Abd-Elhalim

    Longitudinal externally splined parts have garnered increasing attention due to their critical role in power transmission across various industrial applications. This study explores the use of the internally rotating balliz-ing technique for manufacturing these components. The process was analyzed both experimentally and numerically through a mathematical model. The experimental investigation focused on key process parameters, including die rotational speed (50, 63, 80, 100, 125, 160, 200, 250, and 315 rpm), axial feed rate (0.13, 0.15, 0.18, and 0.21 mm/rev), interference between the balls and the tubular sample (cross in-feed: 2.5, 3.5, 4.5 and 5.5 mm), and initial tube thickness (4, 5, 6 and 7 mm). The study assessed the influence of these variables on the forming load and the quality of the produced longitudinal externally splined sleeves. A numerical model was developed to predict forming loads, and the findings indicated that these parameters significantly affect both (forming load and filling ratio). The optimal values for these variables were identified, and the numerical results showed a strong correlation with experimental findings.

  • Open Access

    Novel Multi Levels Tool Based on Rotating Ballizing Technique to Manufacturing the Externally Toothed Components an Experimental Study

    by Eman S. M. Abd-Elhalim, Emad A. Fahmy, Mohamed N. El-Sheikh, Ahmed M. I. Abu-Oqail, Hammad T. Elmetwally, Ayman Ali Abd-Eltwab

    Externally toothed components have a very crucial and essential role in all areas of production and manufacturing because they function as away of transmitting motion, energy, and power in all industrial applications, such asmodes of transportation, aviation, aerospace, equipment, and operating machineslike lathes and milling. All machines have a gear box. Therefore, it is receiving increasing attention. This research presents a new multi-stage rotary ballizing technology for producing toothed parts in one stroke. This process has been investigated experimentally. The parameters that were examined experimentally was at the optimal conditions for single stage ballizing were: die rotation speed of 315 rpm; Axial feed rate, 0.13, mm/rev; The interference (cross in-feed) between the balls and the tubular specimen of 5.5 and 6.5 mm is formed by three stages of ball forming of graduated outer diameters and fixed on a single mandrel; Initial tube thickness is 7 and 8 mm. The effect of these parameters on the forming load, filling ratio and quality of the formed part was studied. The finding sindicated that the seideal variables influence the forming load, tooth filling proportion, and product quality. Experimental results proved the success of this novel technique to form toothed tubular components.

  • Numerical Simulation and Experimentally Investigation into Forming of Cups using Conical Die Based on an Innovative Deep Drawing Combinations Processes

    by Ayman Abd-Eltwab, Sayed Zahran S. Kandil, Mohamed N. El-Sheikh, Essam Khalaf Saied, Eman S. M. Abd-Elhalim

    Deep drawing process is important sheet metal forming processes and is done either with or without blank holder. In this research, there is another innovative method that combines both two modes drawing process at the same time, with the possibility of ironing the thickness for the wall cup produced in the same process. In the first, drawing is done without a blank holder by two inclusion punches, one of which forms an initial cup. Then it creates an inclined blank holder for the drawn cup, and the other punch continues process, followed by wall thinning completing the deformation of the cup. The ironing happens when using several punches with diameters whose clearance is less than the thickness of the blank. A simulation model of the innovative process was built using the ANSYS program, while experimental work was conducted on a general testing machine, also the study effect of the process variables on the produced cups and their characteristics. The results showed that the innovative process of deep drawing led to an increase in drawing ratio that reached 2.24. This is a high percentage compared to the traditional method, also the process variables have a clear effect on the cups produced. The simulation results showed their convergence was observed between the simulation and experimental results at the same conditions. The results also showed that the values of wall thinning reached by 80% from the thickness blank value before drawing

  • Experimental study and Numerical simulation of stress concentration in deep drawing process without blank holder

    by Ayman Abd-Eltwab, Almoataz Gomaa, Eman Sayed Mohamed, Hammad Elmetwally

    Deep drawing without blank holder is an important process for producing circular cups which used in many applications. In this process, the blank is subjected to various loads and stresses concentrations which can lead to cup failure. This research presents a theoretical and experimental study on the effects of stresses concentrations in the deep drawing without blank holder. A simulation model was constructed the Dynamic Simulation Software - DEFORM software - to study the appropriate values for the variables. Practical experiments were conducted on universal testing machine configured for the process. Aluminum blanks were used as specimens with a thickness of 3 mm and various diameters. The process is carried out by placing the blank on the die and balancing it, then moving the punch downward to complete drawing process. During process, the specimen is subjected to loads pulling it downward. To avoid this, several suggestions were made to disperse the stresses and reduce the impact of stress concentration. The experiments were conducted at a speed of 9 mm per minute. For all experiments, the forming loads was measured during process. The results showed that avoiding stress concentration in the deep drawing process without blank holder had a significant effect in reducing the forming forces, minimizing the tearing of the samples, and improving the mechanical properties of the cups. The drawing ratio reached 2.46, which is a high percentage compared to the traditional condition, also there was a convergence between the theoretical, simulated, and experimental results

  • Open Access

    Production of externally gear parts with a new multi-level forming tool based on rotary ballizing technology using Numerical and experimental study

    by Hammad T. Elmetwally, Emad A. Fahmy, Eman S. M. Abd-Elhalim, Ahmed M.I. Abu-Oqail, Mohamed N. El-Sheikh, Ayman Abd-Eltwab

    External gear components are used in a variety of production and manufacturing areas, including motion, energy, and power transmission in many industrial applications. Examples include transportation equipment, aerospace equipment, and machine tools such as lathes and milling machines, all of which rely on gearboxes. As a result, these components are receiving increasing attention. This paper introduces an innovative multi-level rotary ballizing technique for manufacturing toothed tubular parts in one stroke. The process was examined both experimentally and numerically. The experimental study focused on key parameters, including die rotational speed (100, 200, 315, and 400 rpm), mandrel axial feed rate (0.13, 0.15, 0.18, and 0.21 mm/rev), and cross-feed values (4.5, 5.5, and 6.5 mm), achieved using three levels of ball. Additionally, initial tube thicknesses of 6, 7, and 8 mm were analyzed. The study investigated the influence of these parameters on forming load, filling ratio, and the hardness of the formed product. The results demonstrated that these factors significantly impact forming load, filling ratio, and overall product quality. A mathematical model was developed to predict forming loads numerically, and the calculated results showed a strong correlation with experimental findings. Moreover, the experimental results confirmed the effectiveness of the proposed multi-level ballizing technique in successfully forming toothed parts with greater thicknesses while significantly reducing forming loads compared to the single level ballizing method.


  • Open Access

    An Investigation into Forming of Gears Using Rotary Forging Process

    by Ayman Ali Abd-Eltwab, Walid Elsyed Ayoub, Mohamed N. El-Sheikh, Essam Khalaf Saied, Nouby M. Ghazaly, A. A. Gomaa

    Gears and toothed parts are significant components in power transmission systems. These parts usually manufactured by traditional methods such as machining by milling or forming by rotary forging. In this study, the forming of solid gears or toothed parts using a forging process that combines rotary forging and ballizing technique. The specimens were placed inside the die with excessive volume to fill the toothed part in the die. The forming tool applies pressure to the specimen while rotating it together with the die by the lathe machine chuck, while the tool advances continuously in the direction of the die. This reduces height of the specimen and increases its diameter, causing metal flow to fill die cavity teeth and form the gear or toothed part required for production. Two sets of experiments were performed. In the first set, optimization for the appropriate volume of four different sizes of dies and four forming tools was conducted. While in the second set, the effects of forming process variables on the forming load and tooth filling percentage was studied. The results showed that the best tooth filling ratio happened with specimen size of 1.2 to 1.4 times the volume size of the desired tooth for filling. The results also revealed that the forming speed, die size, and forming tool diameter affect the filling ratio and forming load.


  • An investigation into production of double wall tube using squeeze Ballizing technique

    by Ayman Ali Abd-Eltwab, Khaled Hamdy, Ahmed Elsheikh, Essam K. Saied, Nouby M. Ghazaly, A.A. Gomaa


  • Open Access

    Examination of the parameters effect on Al-Cu FSW welded butt joints using formability consent

    by Hammad T. Elmetwally, Hani N. SaadAllah, M.S. Abd-Elhady, Ragab K. Abdel-Magied, Ayman Ali Abd-Eltwab

    In most applications, joining aluminum to copper using friction stir welding (FSW) is a primary manufacturing process followed by secondary forming processes. The aim of this study is to investigate the effect of FSW process parameters (speed and feed rate) on the formability of Al-Cu joints. Aluminum and copper blanks were welded at three different rotational speeds, i.e., 910, 1280, and 1700 rpm, and three different feed rates, i.e., 16, 29, and 44 mm/min. The base metals used in this study were aluminum (Al-1050) and copper in two states, i.e., as received and annealed. The mechanical properties of the base metals and the produced compounds were evaluated by tensile and hardness tests. The aluminum-copper joints were drawn into flangeless U-shape and cup shape using FSW to examine the formability of the joints. The maximum tensile load, punch load, and forming index were obtained when Al was at 1700 rpm and 16 mm/min, i.e., h. The welding was performed with annealed copper at the highest rotational speed and lowest feed rate due to work hardening of the joint. However, the ductility was highest at 1280 rpm and 44 mm/min, i.e., at medium rotation and highest travel speed. It can be depicted that when the FSW Al-Cu joint is further used in the forming process, moderate rotation and high feed speed should be adopted for welding to avoid work hardening and improve the ductility of the joint.


  • Open Access

    An Investigation into Conventional Spinning Process Using Ball Shaped Rollers as Forming Tool

    by Ayman Ali Abd-Eltwab, Gamal I. Helal, Mohamed N. El-Sheikh, Essam Khalaf Saied, Ahmed M. Atia

    Conventional spinning is one of the oldest processes used widely in manufacturing to obtain cup shape products. Conventional spinning is the technique that produces axisymmetric part or component over rotating mandrel with the help of rigid tool known as rollers. The shape of roller is a very important parameter for the success of the spinning process. The present research is aiming to use ball shaped rollers as forming tools in conventional spinning process experimentally. The experimental work was carried out on the center lathe machine as forming machine, the spinning tool or spinning rollers were installed on a dynamometer replaced the tool post while the mandrel was mounted on the lathe chuck. The spinning tool in this work consists of three rollers performing conventional spinning. The set of rollers is mounted on jaws of lathe chuck which working as a holder for the spinning tool parts. The experimental work was conducted in order to test the proposed tool and investigate the influence of the main conventional spinning parameters (mandrel rotational speed, axial feed and blank diameter or spinning ratio) on the process forming load and the product quality. The response of the product quality and required load to process parameters such as rotational speed (76,150, 230 and 305 rpm), axial feed (0.08, 0.15,0.3, and 0.6 mm/rev) also examined new rollers in different mandrel diameters 45, 60 and 80 mm. The experimental results showed that, the suggested tool acquired a spinning ratio of 2.17 which is about 35% greater than the announced conventional spinning ratio of 1.6 without any addition to the tool just using the suggested Ball shaped roller arrangement. The mandrel rotational speed, and axial feed rate are the most pronounced parameters, which have great effects on the forming loads during the spinning process.