Flow Characteristics and Optimization Design of the Stator–Rotor Cavity of the Full Tubular Pump
Open Access
Abstract
The full tubular pump device is taken as the research object in this article. This research method adopts the numerical simulation technology based on the SST (Shear-Stress-Transport) k-ω turbulence model to explore the internal flow characteristics of the stator–rotor cavity of the full tubular pump and optimize the stator–rotor clearance structure. The research shows that under the design conditions, compared with the axial flow pump, the torque increases by 47.91 N·m at the stator–rotor cavity structure and the efficiency decreases by about 20%. The torque at the rotor clearance of the full tubular pump accounts for about 50% of the torque at the rotor. Since there is a large area of backflow on both sides of the cavity, and there is a vortex structure on the inlet side of the cavity, it shows that the rotor structure and its area greatly affect the operating efficiency of the pump device. With the reduction in the rotor force area, the clearance length, and the outer diameter of the disc, the operating efficiency of the pump device gradually increases. Under the design conditions, the optimized model has a maximum efficiency increase of 14.04% and the torque at the cavity rotor is reduced by 39.25 N·m. The results show that the operating efficiency of the full tubular pump is closely related to its rotor structure area, and the force area of the rotor structure needs to be controlled in the actual design process.Keywords
Funding Information
- National Natural Science Foundation of China (51376155)
- Natural Science Foundation of Jiangsu Province of China (BK20190914)
- China Postdoctoral Science Foundation (2019M661946)
- Natural Science Foundation of Jiangsu Higher Education Institutions of China (19KJB570002)
- Water Conservancy Science and Technology Project of Jiangsu Province (2021012)
- Jiangsu Higher Education Institutions (PAPD)
This publication has 17 references indexed in Scilit:
- Numerical simulation and experimental study on the comparison of the hydraulic characteristics of an axial-flow pump and a full tubular pumpRenewable Energy, 2020
- Effect of URANS and Hybrid RANS-Large Eddy Simulation Turbulence Models on Unsteady Turbulent Flows Inside a Side Channel PumpJournal of Fluids Engineering, 2020
- Effect of dual intake direction on critical submergence and vortex strengthJournal of Hydraulic Research, 2018
- Mind the gap: a new insight into the tip leakage vortex using stereo-PIVExperiments in Fluids, 2014
- Three-dimensional flow structures and associated turbulence in the tip region of a waterjet pump rotor bladeExperiments in Fluids, 2011
- Development of a Tip-Leakage Flow—Part 1: The Flow Over a Range of Reynolds NumbersJournal of Fluids Engineering, 2006
- Computational Methodology for Large-Eddy Simulation of Tip-Clearance FlowsAIAA Journal, 2004
- NUMERICAL STUDY FOR BEHAVIOR OF TIP CLEARANCE FLOW IN AXIAL-FLOW PUMPChinese Journal of Mechanical Engineering, 2003
- Tip Clearance and Tip Vortex Cavitation in an Axial Flow PumpJournal of Fluids Engineering, 1997
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994