Development and Analysis of Multistage Spraying of Liquids in Ultrasonic Field
Authors:
Preprint
- 15 November 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Spraying various liquids (primarily aqueous solutions of various substances) is widely used in various technological processes. For most of them, high dispersibility and narrow droplet size distribution are essential. This facilitates ultrasonic spray technique. However, the higher the dispersity of droplets produced by ultrasonic spray, the lower the spray productivity. To solve this problem, we proposed a method of multistage spraying, consisting in generation of a large number of particles of large initial size (to ensure high productivity) and their subsequent destruction by propagation in a periodic ultrasonic field (to ensure small droplet sizes at high productivity). To experimentally determine the capabilities of this technique, a tubular emitter in the shape of a cylinder of stepped-variable cross-section was designed. Configuration of the ultrasonic field inside the emitter (22.2 kHz; 182 dB) implements three-stage spraying (the number of sputtering stages corresponds to the number of anti-nodes along the emitter axis). The effectiveness of proposed and developed technique suitable for generation of droplets sized less than 40 µm with performance exceeding the known ultrasonic spray techniques at least 10 times has been confirmed in the course of conducted research.Keywords
All Related Versions
- Version 1, 2023-11-15, Preprints
- Published version: Applied Sciences, 14 (2), 796.
This publication has 26 references indexed in Scilit:
- A gas-atomized spray cooling system integrated with an ejector loop: Ejector modeling and thermal performance analysisEnergy Conversion and Management, 2019
- Preparation of high-entropy AlCoCrCuFeNiSi alloy powders by gas atomization processMaterials Chemistry and Physics, 2017
- Acoustic separation of submicron solid particles in airUltrasonics, 2015
- Dynamic forces on agglomerated particles caused by high-intensity ultrasoundUltrasonics, 2014
- Varying the agglomeration position of particles in a micro-channel using Acoustic Radiation Force beyond the resonance conditionUltrasonics, 2013
- Investigations into ultrasound induced atomizationUltrasonics Sonochemistry, 2013
- Comparison and correction of the drop breakup models for stochastic dilute spray flowApplied Mathematical Modelling, 2012
- Applications of spray-drying in microencapsulation of food ingredients: An overviewFood Research International, 2007
- Ultrasonic atomization: Effect of liquid phase propertiesUltrasonics, 2006
- Modelling of particle paths passing through an ultrasonic standing waveUltrasonics, 2004