A novel profile considered geometry optimization for unequal rotor pair of claw-type vacuum pump
- 17 February 2025
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 240 (3) , 3328-3337
Abstract
In the claw-type vacuum pumps, the rotor pair is a vital component, the rotor profiles are mainly affected by the performance of the claw-type vacuum pumps. Therefore, this study proposes a novel profile for unequal rotor pair considered geometry optimization to improve the performance of claw-type vacuum pumps. The proposed unequal rotor pair's geometric models and profile equations are established since geometry parameters of unequal rotor profile evaluated and optimized to improve the performance of claw-type vacuum pump. Moreover, the influence of geometry parameters on the working area ratio and sealing line length are presented. The numerical results indicate that the performance of claw-type vacuum pumps with novel unequal rotor profiles has improved significantly compared to the traditional rotor profile. The working area ratio of the proposed pump is higher 7.2% than that of the traditional pump. The working sealing line length of the proposed pump is shorter 31.89% than that of the traditional pump.Keywords
This publication has 10 references indexed in Scilit:
- Geometric design of novel straight claw rotors for claw vacuum pumpsMechanism and Machine Theory, 2019
- Geometric design and performance analysis of a novel smooth rotor profile of claw vacuum pumpsVacuum, 2017
- The working process of an oil‐free claw vacuum pumpVakuum in Forschung und Praxis, 2017
- An analytical model of claw rotor profiles and working process model with the mixing process for claw vacuum pumpsVacuum, 2015
- Investigation of a novel circular arc claw rotor profile for claw vacuum pumps and its performance analysisVacuum, 2015
- Conductance calculation of channels in laminar gas flow regime at an arbitrary pressure differenceVacuum, 2014
- Adding the Teaching of Claw Rotor Compressors to Fluid Machinery CoursesInternational Journal of Mechanical Engineering Education, 2011
- A study of the geometric design and gas port of the claw-type rotorProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2009
- Study on the tooth profile for the screw claw-type pumpMechanism and Machine Theory, 2008
- On the use of quadratic models in unconstrained minimization without derivativesOptimization Methods and Software, 2004