Electric Field Grading and Discharge Inception Voltage Improvement on HVDC GIS/GIL Spacer With Permittivity and Conductivity Graded Materials (ε/σ-FGM)
- 27 July 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (5) , 1811-1817
Abstract
Functionally graded materials (FGM) application with graded permittivity and conductivity is promising as an effective technique for electric field relaxation in SF6 gas around HVDC gas insulated switchgear (GIS)/gas insulated transmission line (GIL) spacers. To approach the practical application of FGM to HVDC GIS/GIL spacers, this article investigates the electric field reduction effect given by permittivity and conductivity graded materials ( $\varepsilon /\sigma $ -FGM) based on actual measured permittivity ( $\varepsilon $ ) characteristics of SrTiO3-filled epoxy composites and conductivity ( $\sigma $ ) characteristics of SiC-filled epoxy composites. In addition, theoretical discharge inception voltage (TDIV) of $\varepsilon /\sigma $ -FGM spacer is calculated under standard lightning impulse (LI) voltage based on the volume–time theory. The results show that the $\varepsilon /\sigma $ -FGM spacer with grading to lower permittivity (GLP) ( $\varepsilon _{r}$ from 12.7 to 4) containing 0–26.9-vol% SrTiO3-filled epoxy composite and U-shaped graded conductivity containing 5–10-vol% SiC-filled epoxy composite is effective for electric field relaxation under DC steady state (DC-SS) and LI voltage where both resistive and capacitive fields present. It is attributed to the higher $\varepsilon $ and $\sigma $ of FGM spacer near the HV conductor/spacer interface. TDIV under LI voltage is also estimated to be 26% higher at 0.5 MPa-abs, compared with the conventional spacer without $\varepsilon /\sigma $ grading.
Keywords
Funding Information
- Grant-in-Aid for Scientific Research by the Japan Society for the Promotion of Science (JP18H01423)
- Hibi Science Foundation
This publication has 13 references indexed in Scilit:
- BNNS Encapsulated TiO2 Nanofillers Endow Polypropylene Cable Insulation with Enhanced Dielectric PerformanceIEEE Transactions on Dielectrics and Electrical Insulation, 2021
- Electric Field Simulation of Permittivity and Conductivity Graded Materials (ε/σ-FGM) for HVDC GIS SpacersIEEE Transactions on Dielectrics and Electrical Insulation, 2021
- Development of Future Compact and Eco-Friendly HVDC Gas-Insulated Systems: Shape Optimization of a DC Spacer Model and Novel Materials InvestigationEnergies, 2020
- Novel spacer coated with functionally graded ZnO film for HVDC gas insulated lineIEEE Transactions on Dielectrics and Electrical Insulation, 2020
- 3D printing fabrication of conductivity non-uniform insulator for surface flashover mitigationIEEE Transactions on Dielectrics and Electrical Insulation, 2019
- Surface coating affecting charge distribution and flashover voltage of cone-type insulator under DC stressIEEE Transactions on Dielectrics and Electrical Insulation, 2019
- Topology optimization of truncated cone insulator with graded permittivity using variable density methodIEEE Transactions on Dielectrics and Electrical Insulation, 2019
- Novel HVDC spacers by adaptively controlling surface charges – part ii: experimentIEEE Transactions on Dielectrics and Electrical Insulation, 2018
- Simulation on discharge inception voltage improvement of GIS spacer with permittivity graded materials (ε-FGM) using flexible mixture casting methodIEEE Transactions on Dielectrics and Electrical Insulation, 2018
- Functional behaviors of electric field grading composite materialsIEEE Transactions on Dielectrics and Electrical Insulation, 2016