Metallurgical and Mechanical Characterization of Low Carbon Steel—Stainless Steel Dissimilar Joints Made by Laser Autogenous Welding
Open Access
Abstract
This paper addresses the metallurgical and mechanical characterization of dissimilar joints made by laser autogenous welding between thin sheets of low-carbon steel (CS) and austenitic stainless steel (SS). The welding technology applied, previously optimized to produce sound dissimilar joints, is based on the heat source displacement from the weld gap centerline towards CS, in order to reduce the SS overheating. The research includes optical microscopy observations, energy dispersive X-ray analysis (EDX) to assess the wt% of Cr, Ni, and Fe in all regions of the dissimilar welded joint, hardness measurements, and tensile tests of transverse-welded flat specimens. In comparison with classical determination of the joint overall mechanical characteristics, the novelty of this research consists of experimental assessment of the local mechanical behavior of the fusion and heat affected zones by using a digital image correlation technique (VIC-2D). This is an efficient tool for determining the constitutive properties of the joint, useful for modelling the mechanical behavior of materials and for verifying the engineering predictions. The results show that the positive difference in yielding between the weld metal and the base materials protects the joint from being plastically deformed. As a consequence, the tensile loading of flat transverse specimens generates the strain localization and failure in CS, far away from the weld.Keywords
This publication has 26 references indexed in Scilit:
- Experimental investigation on ultimate tensile strength of laser butt welded inconel 718 alloy and 2205 duplex stainless steelMaterials Today: Proceedings, 2021
- Investigation of metal mixing in laser keyhole welding of dissimilar metalsMaterials & Design, 2020
- Pivotal microstructural characteristics to determine the cryogenic impact toughness of dissimilar joint between SA645 and AISI304L made by autogenous fiber laser weldingMaterials Characterization, 2020
- Improving fusion zone microstructure inhomogeneity in dissimilar-metal welding by laser welding with oscillationMaterials Letters, 2020
- Resistive Joining – A Novel Dissimilar Welding Method for Thin Sheet MetalsProcedia Manufacturing, 2020
- Mechanical and microstructural characterization of laser weld-brazed AA6082-galvanized steel jointJournal of Materials Processing Technology, 2019
- Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction weldingMaterials & Design (1980-2015), 2011
- A perspective on residual stresses in weldingScience and Technology of Welding and Joining, 2011
- Influence of heating source position and dilution rate in achieving overmatched dissimilar welded jointsScience and Technology of Welding and Joining, 2010
- Structure, properties, and residual stress of 304L stainless steel friction stir weldsScripta Materialia, 2003