Microstructural evolution and cyclic oxidation of Pt-Al-YSZ coating under thermal shock
Open Access
- 1 January 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016575
Abstract
In this research, the effect of thermal shock has been investigated on the microstructure and cyclic oxidation of Pt-Al-7%YSZ coating applied on Rene-80 superalloy. The microstructural evaluation and phase identification were performed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). The thermal shock test consisted of repeated cycles of rapid cooling between 900 °C and 400 °C. Prior to the thermal shock test, the specimen coated by Pt-electroplating, high-activity low-temperature (HALT) aluminizing and the thermal spray of YSZ ceramic layer. From surface towards the substrate; the coating consisted of 5 layers including: 7% YSZ, PtAl2 + β-(Ni,Pt)Al, β-(Ni,Pt)Al with fine precipitates rich in α-(Cr) and α-(W), precipitate-free β-NiAl, and inter-diffusion zone next to the specimen surface. After the thermal shock test, spallation and delamination have been observed in the YSZ layer. The Pt-Al layer was found in upper and lower parts of the coating with different Pt concentration. Also, the chemical composition of the Pt-Al layer demonstrated the removal of PtAl2 particles and β transformation to both γ and γ′ phases. Degradation of Pt-Al layer occurred by ratcheting the thermally grown oxide (TGO), rumpling, and cavitation. Comparison of weight changes showed that the thermal shock resistance is improved by Pt-Al-7% YSZ coating.Keywords
This publication has 34 references indexed in Scilit:
- Morphology, bond strength and thermal cycling behavior of (Ni, Pt)Al/YSZ EB-PVD thermal barrier coatingsJournal of Alloys and Compounds, 2015
- Thermal shock behavior of platinum aluminide bond coat/electron beam-physical vapor deposited thermal barrier coatingsJournal of Alloys and Compounds, 2014
- Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloysProgress in Materials Science, 2013
- Improving the thermal shock resistance of plasma sprayed CYSZ thermal barrier coatings by laser surface modificationOptics and Lasers in Engineering, 2012
- Comparative Performance of a Thermal Barrier Coating System Utilizing Platinum Aluminide Bond Coat on Alloys CMSX-4® and MAR M® 002DSJournal of Engineering for Gas Turbines and Power, 2011
- On the interfacial degradation mechanisms of thermal barrier coating systems: Effects of bond coat compositionActa Materialia, 2010
- The influence of bondcoat and topcoat mechanical properties on stress development in thermal barrier coating systemsActa Materialia, 2009
- Microstructure evolution and its influence on deformation mechanisms during high temperature creep of a nickel base superalloyMaterials Science and Engineering: A, 2009
- Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A ReviewJournal of Thermal Spray Technology, 2008
- Effect of pre-existing surface crack morphology on the interfacial thermal fracture of thermal barrier coatings: a numerical studyMaterials Science and Engineering: A, 2003