Research on Gain Fault Diagnosis of Current Sensor for Doubly Salient Electromagnetic Motor at Standstill
- 19 November 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (6) , 5646-5657
Abstract
Fault diagnosis of current sensor is the key technology to improve the reliability of doubly salient electromagnetic motor (DSEM) drive system. In some occasions, such as initial position estimation of position sensorless, the motor is at standstill. However, there is no method addressing the fault diagnosis of current sensor for DSEM at standstill. To solve this problem, three methods are proposed to realize gain fault diagnosis of current sensor for DSEM at standstill in this article. One method is realized by detecting excitation current during excitation field building, and the other two are realized by detecting phase currents during the injection of specific current pulses. Then, there is a comparison of three fault diagnosis methods. The proposed method does not require the values of motor parameters, and it can be used either as part of an initial debugging or periodic testing of the system, which can also improve the reliability of initial position estimation to avoid startup failure of motor. Finally, the experimental results validate the effectiveness of the proposed method.Keywords
Funding Information
- Key Project of National Natural Science Foundation of China (51737006)
This publication has 27 references indexed in Scilit:
- A Fault Diagnosis and Fault-Tolerant Control Method for Current Sensors in Doubly Salient Electromagnetic Motor Drive SystemsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2024
- Sequential Error Disentanglement of Three-Phase Current Sensor for AC Machine in Standstill ConditionsIEEE Access, 2022
- Current Sensor Fault Localization and Identification of PMSM Drives Using Difference OperatorIEEE Journal of Emerging and Selected Topics in Power Electronics, 2022
- Torque Ripple Reduction Strategy for Doubly Salient Electromagnetic Machine Based on Current Given FunctionIEEE Journal of Emerging and Selected Topics in Power Electronics, 2022
- Current-Scaling Gain Compensation of Motor Drives Under Locked-Rotor Condition Considering Inequality of Phase ResistancesIEEE Transactions on Industry Applications, 2020
- Two-Step Rotor Position Estimation Method for Doubly Salient Electromagnetic Starter-Generator Over Zero and Low Speeds RangeIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- Position Sensorless Control for Doubly Salient Electromagnetic Machine With Improved Startup PerformanceIEEE Transactions on Industrial Electronics, 2019
- Research on Initial Rotor Position Estimation and Anti-Reverse Startup Methods for DSEMIEEE Transactions on Industrial Electronics, 2016
- Detection and Isolation of Speed-, DC-Link Voltage-, and Current-Sensor Faults Based on an Adaptive Observer in Induction-Motor DrivesIEEE Transactions on Industrial Electronics, 2010
- Current Measurement Gain Tuning Using High-Frequency Signal InjectionIEEE Transactions on Industry Applications, 2008