Analysis of the Correctness of Mapping the Passage of a Semi-Trailer through a Road Obstacle on a Road Simulator
Open Access
Abstract
Road simulators enable accelerated durability tests under similar-to-real road conditions. However, the road simulator itself generates the signals with the appropriate strength and amplitude that is adequate to the response registered by the sensors during the real run. Therefore, there is a need for verification of the validity of the representation of vehicle runs on a road simulator in terms of the shape of the generated profile and possible sources of uncertainty. The tests in this study were carried out for a multi-axle vehicle passing an obstacle of known shape. Various signals were registered while the vehicle was passing over the obstacle. The MTS (System Corporation) road simulator’s response to the signal given by the obstacle was then checked. The results showed a 99% correlation between the simulation and the road test results. A numerical model of the vehicle was developed to verify the quality of representation of the real conditions by the road simulator, especially in terms of forces resulting from the road profile. Interestingly, the input signal generated by the road simulator provided a very good accuracy of the vehicle response, as tested with use of the numerical model.Keywords
Funding Information
- Faculty of Mechanical Engineering of the Wrocław University of Science and Technology
This publication has 19 references indexed in Scilit:
- Modelling a quad-bike rollover mechanism when traversing an asymmetric bumpInternational Journal of Crashworthiness, 2018
- An analytical study of the performance indices of air spring suspensions over the passive suspensionBeni-Suef University Journal of Basic and Applied Sciences, 2018
- A combined nonlinear and hysteresis model of shock absorber for quarter car simulation on the basis of experimental dataEngineering Science and Technology, an International Journal, 2017
- Development of Matlab Simulink model for dynamics analysis of passive suspension system for lightweight vehicleJournal of Physics: Conference Series, 2017
- Experimental Investigation on Road Vehicle Active SuspensionStrojniški vestnik - Journal of Mechanical Engineering, 2013
- Model Development and Dynamic Load-Sharing Analysis of Longitudinal-Connected Air SuspensionsStrojniški vestnik - Journal of Mechanical Engineering, 2013
- Development of a Full-Vehicle Hybrid-Simulation Test using Hybrid System Response Convergence (HSRC)SAE International Journal of Passenger Cars - Mechanical Systems, 2012
- Modeling and validation of off-road vehicle ride dynamicsMechanical Systems and Signal Processing, 2012
- Accelerated Reliability and Durability Testing Technology2011
- Application of Road Simulator Service Loads in Automotive Component Durability AssessmentThe Open Industrial and Manufacturing Engineering Journal, 2011