Tomasz Szydłowski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tomasz Szydłowski has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Marek Stembalski
Department of Machine Tools and Mechanical Technologies, Wroclaw University of Science and Technology, 50-370 Wrocław, Poland
7 shared publications - Damian Batory
Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, 1/15 Stefanowskiego St., 90-924 Lodz, Poland
5 shared publications - Arkadiusz Czarnuch
Łódź University of Technology
4 shared publications - Krzysztof Siczek
Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, 90-537 Lodz, Poland
3 shared publications - Marek Wozniak
Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, 90-537 Lodz, Poland
2 shared publications - Maryruth Glogowski
Faculty of Process and Environmental Engineering, Lodz University of Technology, Wolczanska 213, 90-924 Lodz, Poland
2 shared publications
Latest Publications
- Open Access
- 1 June 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Advances in Science and Technology Research Journal
- Vol. 20 (6) , 135-148
Validating the durability testing method for large-sized vehicles based on dynamic characteristics of shock absorbers-extended tests
Road simulators are one of the methods of conducting durability tests. The article evaluates the methodology developed by the authors and described in earlier publications for durability tests on road vehicles using the Road Simulator. This evaluation was conducted by comparing the dynamic...
- 1 June 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Advances in Science and Technology Research Journal
- Vol. 20 (6) , 135-148
Open AccessValidating the durability testing method for large-sized vehicles based on dynamic characteristics of shock absorbers-extended tests
Road simulators are one of the methods of conducting durability tests. The article evaluates the methodology developed by the authors and described in earlier publications for durability tests on road vehicles using the Road Simulator. This evaluation was conducted by comparing the dynamic...
- Open Access
- 1 February 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Advances in Science and Technology Research Journal
- Vol. 20 (2) , 78-93
Study on the resistance to friction in a lead screw-nut contact zone in a car scissor lift
The aim of the study the resistance to friction in the lead screw-nut contact zone in a car scissor lift during its operation. In both cases of lack of lubricant and lubricated contact zone the stick-slip phenomena occurred therein. The analytical model of lead screw-nut assembly driven by...
- 1 February 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Advances in Science and Technology Research Journal
- Vol. 20 (2) , 78-93
Open AccessStudy on the resistance to friction in a lead screw-nut contact zone in a car scissor lift
The aim of the study the resistance to friction in the lead screw-nut contact zone in a car scissor lift during its operation. In both cases of lack of lubricant and lubricated contact zone the stick-slip phenomena occurred therein. The analytical model of lead screw-nut assembly driven by...
- Open Access
- 27 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12567
Influence of Shock Absorber Construction on Production Parameters of Its Prototype Solutions
This article describes the conducted examinations of five different prototype shock absorbers. The differences resulted from deliberate modifications to their components. The tests were divided into five series of measurements, each involving testing five identical shock absorber designs. The authors assessed the repeatability and process capability of the production process for each shock absorber design. The study also aimed to identify factors that could lead to undesirable variations in the shock absorber’s dynamic parameters, such as damping force, the shape of the force–displacement characteristic, differences in the system’s response during compression and rebound, and the variability of the response depending on the piston’s speed. The results were then analyzed by using various research methods, among which the most important is the SPC (Statistical Process Control) method. Furthermore, statistical results, such as Cp, Cpk, stability graphs, and process repeatability, are presented.
- 27 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12567
Open AccessInfluence of Shock Absorber Construction on Production Parameters of Its Prototype Solutions
This article describes the conducted examinations of five different prototype shock absorbers. The differences resulted from deliberate modifications to their components. The tests were divided into five series of measurements, each involving testing five identical shock absorber designs. The authors assessed the repeatability and process capability of the production process for each shock absorber design. The study also aimed to identify factors that could lead to undesirable variations in the shock absorber’s dynamic parameters, such as damping force, the shape of the force–displacement characteristic, differences in the system’s response during compression and rebound, and the variability of the response depending on the piston’s speed. The results were then analyzed by using various research methods, among which the most important is the SPC (Statistical Process Control) method. Furthermore, statistical results, such as Cp, Cpk, stability graphs, and process repeatability, are presented.
- 7 October 2024
- Published by Wroclaw Board of Scientific Technical Societies Federation NOT in Journal of Machine Engineering
- Vol. 24 (3) , 119-132
Influence of Shock Absorber on Electric Axle Vibration in Semi-Trailer
This article describes the results of a study of the effect of a shock absorber on the vibration of an electric axle in a semi-trailer. The dynamic characteristics of three shock absorbers from different manufacturers were determined. They were then installed on the electric axle of a semi-trailer equipped with a measuring apparatus. Test runs were carried out on two types of road surface - a test track with a defined profile and a local road. Each run was repeated for a fully loaded and an empty semi-trailer. These tests were designed to determine the values of the dynamic parameters of the electric axle during operation of the semi-trailer depending on the shock absorber used.
- 7 October 2024
- Published by Wroclaw Board of Scientific Technical Societies Federation NOT in Journal of Machine Engineering
- Vol. 24 (3) , 119-132
Influence of Shock Absorber on Electric Axle Vibration in Semi-Trailer
This article describes the results of a study of the effect of a shock absorber on the vibration of an electric axle in a semi-trailer. The dynamic characteristics of three shock absorbers from different manufacturers were determined. They were then installed on the electric axle of a semi-trailer equipped with a measuring apparatus. Test runs were carried out on two types of road surface - a test track with a defined profile and a local road. Each run was repeated for a fully loaded and an empty semi-trailer. These tests were designed to determine the values of the dynamic parameters of the electric axle during operation of the semi-trailer depending on the shock absorber used.
- Open Access
- 22 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 127
Assessment of the Possibility of Validating the Durability Testing Method for Large-Sized Vehicles Based on Changes in Shock Absorber Characteristics—Preliminary Tests
The use of road simulators in vehicle durability tests enables a significant reduction in time related to the implementation of a new product. However, there is still a need to improve the methods of these tests in order to obtain a full correlation between the time of the tests on the simulator with respect to the mileage of the vehicle in real road conditions. The aim of this work is a validation and improvement of the durability testing method for large-sized vehicles. Comparative tests of shock absorbers dismantled from semi-trailers with different mileage and shock absorbers dismantled from semi-trailers after durability tests conducted at the MTS test bench are presented. The relationship between the maximum damping force and the displacement speed of the shock absorber piston was examined. Additionally, the influence of the shock absorber temperature on the damping force was analyzed. As a result of the tests, the dynamic characteristics of the shock absorbers were determined and the relationship between the maximum damping force and the mileage of the trailers was determined. It was found that the load on the trailers during their operation has a significant impact on the change in the characteristics of the shock absorbers. What is new in this publication is the validation of the methodology for conducting durability tests previously proposed by the authors based on the selected component, which is the shock absorber. The authors have not yet encountered in the literature any attempt to validate the methodology for conducting durability tests for large-sized vehicles.
- 22 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 127
Open AccessAssessment of the Possibility of Validating the Durability Testing Method for Large-Sized Vehicles Based on Changes in Shock Absorber Characteristics—Preliminary Tests
The use of road simulators in vehicle durability tests enables a significant reduction in time related to the implementation of a new product. However, there is still a need to improve the methods of these tests in order to obtain a full correlation between the time of the tests on the simulator with respect to the mileage of the vehicle in real road conditions. The aim of this work is a validation and improvement of the durability testing method for large-sized vehicles. Comparative tests of shock absorbers dismantled from semi-trailers with different mileage and shock absorbers dismantled from semi-trailers after durability tests conducted at the MTS test bench are presented. The relationship between the maximum damping force and the displacement speed of the shock absorber piston was examined. Additionally, the influence of the shock absorber temperature on the damping force was analyzed. As a result of the tests, the dynamic characteristics of the shock absorbers were determined and the relationship between the maximum damping force and the mileage of the trailers was determined. It was found that the load on the trailers during their operation has a significant impact on the change in the characteristics of the shock absorbers. What is new in this publication is the validation of the methodology for conducting durability tests previously proposed by the authors based on the selected component, which is the shock absorber. The authors have not yet encountered in the literature any attempt to validate the methodology for conducting durability tests for large-sized vehicles.
- Open Access
Analysis of the Correctness of Mapping the Passage of a Semi-Trailer through a Road Obstacle on a Road Simulator
Road simulators enable accelerated durability tests under similar-to-real road conditions. However, the road simulator itself generates the signals with the appropriate strength and amplitude that is adequate to the response registered by the sensors during the real run. Therefore, there is a need for verification of the validity of the representation of vehicle runs on a road simulator in terms of the shape of the generated profile and possible sources of uncertainty. The tests in this study were carried out for a multi-axle vehicle passing an obstacle of known shape. Various signals were registered while the vehicle was passing over the obstacle. The MTS (System Corporation) road simulator’s response to the signal given by the obstacle was then checked. The results showed a 99% correlation between the simulation and the road test results. A numerical model of the vehicle was developed to verify the quality of representation of the real conditions by the road simulator, especially in terms of forces resulting from the road profile. Interestingly, the input signal generated by the road simulator provided a very good accuracy of the vehicle response, as tested with use of the numerical model.
Open AccessAnalysis of the Correctness of Mapping the Passage of a Semi-Trailer through a Road Obstacle on a Road Simulator
Road simulators enable accelerated durability tests under similar-to-real road conditions. However, the road simulator itself generates the signals with the appropriate strength and amplitude that is adequate to the response registered by the sensors during the real run. Therefore, there is a need for verification of the validity of the representation of vehicle runs on a road simulator in terms of the shape of the generated profile and possible sources of uncertainty. The tests in this study were carried out for a multi-axle vehicle passing an obstacle of known shape. Various signals were registered while the vehicle was passing over the obstacle. The MTS (System Corporation) road simulator’s response to the signal given by the obstacle was then checked. The results showed a 99% correlation between the simulation and the road test results. A numerical model of the vehicle was developed to verify the quality of representation of the real conditions by the road simulator, especially in terms of forces resulting from the road profile. Interestingly, the input signal generated by the road simulator provided a very good accuracy of the vehicle response, as tested with use of the numerical model.
- Open Access
- 17 May 2023
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
Study on selected parameters of engine with the active combustion chamber
The present study was focused on the combustion engine with a variable compression ratio (VCR), namely the four-stroke air-cooled engine with the active combustion chamber (ACC). An indicated pressure, torque, power, and specific fuel consumption of that engine were investigated experimentally as a goal of the present study. Experiments were conducted using two versions of an engine. Two parameters particularly influencing the ACC engine performance including the maximum compression ratio CRmax and the indicator γfm determining the correct operation of the ACC system, were described. It was found that the ACC engine allowed avoiding detonation combustion without changing the amount and composition of the combustible mixture, and even without delaying the ignition advance angle. In addition, the possible range of control of the combustion process allowed the ACC engine to operate with different types of hydrocarbon fuels, for example, in the form of petrol with various alcohol admixtures . The very intense flow of the combustible mixture inside the cylinder of the ACC engine allowed describing the combustion in the ACC engine with zero-dimensional mathematical models with the dual Vibe function providing the proper characterization of the heat release process. The use of very high maximum compression ratios allows the ACC engine to operate to a certain extent as a Homogeneous Charge Compression Ignition (HCCI) engine with high lambda coefficients.
- 17 May 2023
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
Open AccessStudy on selected parameters of engine with the active combustion chamber
The present study was focused on the combustion engine with a variable compression ratio (VCR), namely the four-stroke air-cooled engine with the active combustion chamber (ACC). An indicated pressure, torque, power, and specific fuel consumption of that engine were investigated experimentally as a goal of the present study. Experiments were conducted using two versions of an engine. Two parameters particularly influencing the ACC engine performance including the maximum compression ratio CRmax and the indicator γfm determining the correct operation of the ACC system, were described. It was found that the ACC engine allowed avoiding detonation combustion without changing the amount and composition of the combustible mixture, and even without delaying the ignition advance angle. In addition, the possible range of control of the combustion process allowed the ACC engine to operate with different types of hydrocarbon fuels, for example, in the form of petrol with various alcohol admixtures . The very intense flow of the combustible mixture inside the cylinder of the ACC engine allowed describing the combustion in the ACC engine with zero-dimensional mathematical models with the dual Vibe function providing the proper characterization of the heat release process. The use of very high maximum compression ratios allows the ACC engine to operate to a certain extent as a Homogeneous Charge Compression Ignition (HCCI) engine with high lambda coefficients.
- 22 February 2023
- Published by Springer Nature
- p. 236-246
Methodology of the Durability Tests of Semi-trailers on the MTS 320 Road Simulator
- 22 February 2023
- Published by Springer Nature
- p. 236-246
Methodology of the Durability Tests of Semi-trailers on the MTS 320 Road Simulator
- Open Access
- 29 May 2022
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
- Vol. 191 (4) , 92-104
The effect of machined valve springs application on dynamic properties of electro-hydraulically driven valve train
Nowadays, the constant striving to reduce the emission and increase the overall efficiency over a wide range of speeds and loads of the internal combustion engine (CE) is observed. The different methods for improving the charge exchange in the engine, particularly ones based on the variable valve timing are sought. This variability can be achieved, among others by using the electrohydraulic valve drive. The goal of the present study is to compare the dynamic parameters of the engine valvetrain utilizing the unilateral electrohydraulic valve drive and various types of valve springs. The model of such a drive being developed by authors and experimentally verified was used for the analysis. Using the Finite Element Method, the models of springs made through the machining from single sleeves were developed. The effect of various geometrical parameters of the modernized springs on their stiffness and on the resulted valvetrain dynamics was examined.
- 29 May 2022
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
- Vol. 191 (4) , 92-104
Open AccessThe effect of machined valve springs application on dynamic properties of electro-hydraulically driven valve train
Nowadays, the constant striving to reduce the emission and increase the overall efficiency over a wide range of speeds and loads of the internal combustion engine (CE) is observed. The different methods for improving the charge exchange in the engine, particularly ones based on the variable valve timing are sought. This variability can be achieved, among others by using the electrohydraulic valve drive. The goal of the present study is to compare the dynamic parameters of the engine valvetrain utilizing the unilateral electrohydraulic valve drive and various types of valve springs. The model of such a drive being developed by authors and experimentally verified was used for the analysis. Using the Finite Element Method, the models of springs made through the machining from single sleeves were developed. The effect of various geometrical parameters of the modernized springs on their stiffness and on the resulted valvetrain dynamics was examined.