Abstract
This article presents a segment-interlace (SI) multiple-phase (MP) hybrid converter for 12-V bus to point-of-load (PoL) conversion. This topology achieves key features that are typically difficult to realize together in conventional MP hybrid converters: 1) concurrent charging of all inductors; 2) wide voltage conversion ratio (VCR) range; and 3) inherent auto-balancing of inductor currents and flying capacitor voltages. We first analyze the rationale behind the auto balance in the inductor currents. Next, we propose the SI converter, detailing its evolution from conventional 3-path-4-state (3P4S) converter and its working principles across different VCR ranges. Then, we prove that the SI approach is compatible with multiple hybrid topologies. Its capability of downsizing switching frequency enables comparable efficiency as conventional phase shedding. Fabricated in a 180-nm bipolar-CMOS-DMOS (BCD) process, the prototype three-phase SI converter achieves a measured peak efficiency of 92.9% and an $I_{\mathrm { L}}$ imbalance within 1.5%. The concurrent charging enables the lowest normalized output undershoot among compared designs.
Funding Information
  • Science and Technology Development Fund (0029/2025/AMJ)
  • Science and Technology Development Fund (0042/2025/RIB1)
  • Science and Technology Development Fund (004/2023/SKL)
  • Science and Technology Development Fund (001/2024/COP)
  • Guangdong-Hong Kong-Macao Joint Laboratories (2025B1212150003)
  • Basic and Applied Basic Research Foundation of Guangdong Province (2023B1515130001)
  • Research Committee of University of Macau (MYRG-GRG2024-00041-IME)

This publication has 24 references indexed in Scilit: