Effects of Preformed Composition and Pore Size on Microstructure and Properties of SiCf/SiC Composites via Reactive Melt Infiltration
Open Access
- 25 November 2024
- Vol. 17 (23) , 5765
Abstract
This study investigated the influence of preformed composition and pore size on the microstructure and properties of SiCf/SiC composites fabricated via reactive melt infiltration (RMI). The process began with the impregnation of SiC fiber cloth with phenolic resin, followed by lamination and pyrolysis. Subsequent steps included further impregnations with phenolic resin, SiC slurry, and carbon black slurry, each followed by additional pyrolysis. This process resulted in three types of preforms, designated as PP, PS, and PC. These preforms exhibited a multimodal distribution of pore size, with peak pore diameters around 5 μm for PP, ranging from 200 nm to 4 μm for PS, and approximately 150 nm for PC. The preforms were then subjected to molten silicon infiltration at 1600 °C under vacuum for 1 h to create SiCf/SiC composites. The PP preform contained only pyrolytic carbon, leading to a composite with high closed porosity and unreacted carbon, resulting in poor mechanical properties. The PS preform, which was impregnated with SiC particles, displayed an optimized pore size distribution but retained significant amounts of residual silicon and carbon in the final composite. In contrast, the PC preform featured both an ideal pore size distribution and an adequate amount of carbon, achieving high density and low porosity with reduced residual phases in the final composite. This optimization led to a flexural strength of 152.4 ± 15.4 MPa, an elastic modulus of about 181.1 ± 0.1 GPa, and a thermal conductivity of 27.7 W/mK in the SiCf/SiC composites product. These findings underscore the importance of preform optimization in enhancing the performance of SiCf/SiC composites, potentially paving the way for more reliable nuclear fuel cladding solutions.Keywords
Funding Information
- National Natural Science Foundation of China (52302077, 2022Z084, 2018A-03-A, XDA041030301, HND20TDTHGC00)
- Key Research and Development Program of Ningbo (52302077, 2022Z084, 2018A-03-A, XDA041030301, HND20TDTHGC00)
- 3315 Innovation Team of Ningbo (52302077, 2022Z084, 2018A-03-A, XDA041030301, HND20TDTHGC00)
- Strategic Priority Research Program of the Chinese Academy of Sciences (52302077, 2022Z084, 2018A-03-A, XDA041030301, HND20TDTHGC00)
- Top-talent Team Program of Ningbo, Advanced Energy Science and Technology Guangdong Laboratory (52302077, 2022Z084, 2018A-03-A, XDA041030301, HND20TDTHGC00)
- Hundred Talents Program of the Chinese Academy of Sciences (52302077, 2022Z084, 2018A-03-A, XDA041030301, HND20TDTHGC00)
This publication has 40 references indexed in Scilit:
- Carbon black: a thermally conductive reinforcement for epoxy based compositeBulletin of Materials Science, 2024
- A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltrationComposites Part A: Applied Science and Manufacturing, 2023
- Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routesCeramics International, 2021
- Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behaviorJournal of Advanced Ceramics, 2020
- Improved thermal conductivity of silicon carbide fibers-reinforced silicon carbide matrix composites by chemical vapor infiltration methodCeramics International, 2019
- Reactive melt infiltrated C f /SiC composites with robust matrix derived from novel engineered pyrolytic carbon structureCeramics International, 2017
- Nanostructured mesoporous carbons: Tuning texture and surface chemistryCarbon, 2016
- Mechanical and thermal properties of chemical vapor infiltration engineered 2D-woven and 3D-braided carbon silicate compositesCeramics International, 2015
- A low cost preparation of C/SiC composites by infiltrating molten Si into gelcasted pure porous carbon preformCeramics International, 2015
- Effect of PyC interphase thickness on mechanical behaviors of SiBC matrix modified C/SiC composites fabricated by reactive melt infiltrationCarbon, 2014