Alexander Yudin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexander Yudin has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Artem Babaiev
National technical university «Kharkiv polytechnic institute
3 shared publications - Olena Avdieieva
Department of Computer Modeling of Processes and Systems, National Technical University “Kharkiv Polytechnic Institute”, 61002 Kharkiv, Ukraine
3 shared publications - Valentyn Barannik
National technical university «Kharkiv polytechnic institute
3 shared publications - Valery Subotovich
Anatolii Pidhornyi Institute of Power Machines and Systems of the National Academy of Sciences of Ukraine
2 shared publications - Alexander Alexandrovich Chursin
RUDN University
1 shared publication - Alexander Lapuzin
National Technical University “Kharkiv Polytechnic Institute
1 shared publication
Latest Publications
- Open Access
- 29 June 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (7 (141)) , 71-82
Development a computationally efficient method to solve direct and inverse aerodynamic problems related to turbomachines
This study investigates aerodynamic processes in interblade, axial annular, and radial-axial channels in turbomachines. The task addressed relates to the need to improve the computational efficiency in solving direct and inverse aerodynamic problems when analyzing and designing flow parts of turbomachines. A computationally efficient method for solving direct and inverse aerodynamic problems has been proposed, which provides acceptable accuracy for engineering practice at significantly lower computational costs compared to conventional CFD approaches. The results include a devised single mathematical formulation based on Euler equations for a compressible fluid, written in terms of the flow function. The proposed method makes it possible to consider direct and inverse problems within a common mathematical structure. The system of equations is reduced to a single differential equation and a set of algebraic relations while the global flow problem is decomposed into a set of independent problems for individual cross-sections. The inverse problem is stated as a nonlinear optimization problem based on the mass flow rate agreement condition derived from the energy equation. The computational complexity is reduced by using the flow function and the decomposition of the computational domain. The method combines the capabilities of direct analysis and reconstruction of the flow channel geometry based on the predefined aerodynamic characteristics. Verification by experimental data and direct calculation results demonstrated good agreement between the velocity distributions and the reconstructed geometry; the maximum deviations did not exceed 0.3%. The results could be practically applied to preliminary design, parametric optimization, as well as inverse design of the flow parts in turbomachines
- 29 June 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (7 (141)) , 71-82
Open AccessDevelopment a computationally efficient method to solve direct and inverse aerodynamic problems related to turbomachines
This study investigates aerodynamic processes in interblade, axial annular, and radial-axial channels in turbomachines. The task addressed relates to the need to improve the computational efficiency in solving direct and inverse aerodynamic problems when analyzing and designing flow parts of turbomachines. A computationally efficient method for solving direct and inverse aerodynamic problems has been proposed, which provides acceptable accuracy for engineering practice at significantly lower computational costs compared to conventional CFD approaches. The results include a devised single mathematical formulation based on Euler equations for a compressible fluid, written in terms of the flow function. The proposed method makes it possible to consider direct and inverse problems within a common mathematical structure. The system of equations is reduced to a single differential equation and a set of algebraic relations while the global flow problem is decomposed into a set of independent problems for individual cross-sections. The inverse problem is stated as a nonlinear optimization problem based on the mass flow rate agreement condition derived from the energy equation. The computational complexity is reduced by using the flow function and the decomposition of the computational domain. The method combines the capabilities of direct analysis and reconstruction of the flow channel geometry based on the predefined aerodynamic characteristics. Verification by experimental data and direct calculation results demonstrated good agreement between the velocity distributions and the reconstructed geometry; the maximum deviations did not exceed 0.3%. The results could be practically applied to preliminary design, parametric optimization, as well as inverse design of the flow parts in turbomachines
- Open Access
- 29 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in NTU "KhPI" Bulletin: Power and heat engineering processes and equipment
- No. 1,p. 5-16
Evaluation of Methods for Predicting Deviation Angle in Planar Turbine Cascades
This paper presents a review of methods for predicting the flow exit angle from a planar turbine cascade operating with subsonic and transonic flow regimes. An analysis of empirical correlations used to determine the deviation angle is performed, and the advantages and limitations of each approach are discussed. The accuracy of empirical correlations and the CFD approach is evaluated by comparing their predictions with experimental data obtained for the VKI turbine cascade profile under both design and off-design operating conditions. The comparison reveals a low prediction accuracy of empirical correlations for considered regimes. The largest discrepancies are observed at outlet Mach numbers below 0.6. The closest agreement with experimental data is achieved using CFD (AxCFD™). The results show good consistency both in terms of the absolute values of the deviation angle and the trend of its variation under off-design conditions. Additional CFD simulations of three planar turbine cascade configurations demonstrate a significant influence of blade geometry on the predicted deviation angle. The relationship between the kinetic energy loss coefficient and the deviation angle is also discussed. Both CFD and experimental results indicate that the minimum loss condition corresponds to the minimum deviation angle. Furthermore, a consistent trend in the variation of these two parameters is observed across different operating regimes. It is concluded that accurate prediction of the deviation angle is a complex problem requiring consideration of a wide range of geometric and operating parameters of the cascade. Further research in this area is recommended.
- 29 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in NTU "KhPI" Bulletin: Power and heat engineering processes and equipment
- No. 1,p. 5-16
Open AccessEvaluation of Methods for Predicting Deviation Angle in Planar Turbine Cascades
This paper presents a review of methods for predicting the flow exit angle from a planar turbine cascade operating with subsonic and transonic flow regimes. An analysis of empirical correlations used to determine the deviation angle is performed, and the advantages and limitations of each approach are discussed. The accuracy of empirical correlations and the CFD approach is evaluated by comparing their predictions with experimental data obtained for the VKI turbine cascade profile under both design and off-design operating conditions. The comparison reveals a low prediction accuracy of empirical correlations for considered regimes. The largest discrepancies are observed at outlet Mach numbers below 0.6. The closest agreement with experimental data is achieved using CFD (AxCFD™). The results show good consistency both in terms of the absolute values of the deviation angle and the trend of its variation under off-design conditions. Additional CFD simulations of three planar turbine cascade configurations demonstrate a significant influence of blade geometry on the predicted deviation angle. The relationship between the kinetic energy loss coefficient and the deviation angle is also discussed. Both CFD and experimental results indicate that the minimum loss condition corresponds to the minimum deviation angle. Furthermore, a consistent trend in the variation of these two parameters is observed across different operating regimes. It is concluded that accurate prediction of the deviation angle is a complex problem requiring consideration of a wide range of geometric and operating parameters of the cascade. Further research in this area is recommended.
- 30 December 2025
- Published by National Technical University Kharkiv Polytechnic Institute in NTU "KhPI" Bulletin: Power and heat engineering processes and equipment
- No. 1,p. 16-28
The Parameters Influence of Noncylindrical Flow on the Elementary Turbine Stage Efficiency Criteria
A one-dimensional calculation method for a turbine stage with arbitrary meridional outlines has been developed. The method allows, taking into account the compressibility of the gas medium, to analyze the influence of the velocity coefficients of the nozzle and rotor cascades, the angles of the one-dimensional spatial axisymmetric flow in front of and behind the rotor cascade, and some other parameters on the degree of reactivity, cascade efficiency, and flow parameters in front of and behind the rotor cascade (RC). The influence of four parameters of non-cylindricality of the flow on the degree of reactivity of the stage and the efficiency coefficients (EffC) is considered. Hydraulic efficiency, which takes into account losses in the stage nozzle and rotor cascades, is virtually independent of the flow stream expansion rate in the rotor cascade and the magnitude of the radial velocity component behind this cascade. Increasing the radial velocity component upstream of the rotor cascade and increasing the average radius of the flow stream in the rotor cascade can reduce hydraulic efficiency by several percent. This can also be observed when the velocity coefficient of the working cascade is considered independent of these parameters. Further research is needed to determine the degree of influence of the radial velocity component on the speed coefficients of the nozzle and rotor cascade. Relative blading efficiency and stage power depend on cascade losses and the magnitude of the outlet velocity losses. A high radial velocity component downstream of the last stages of steam and gas turbines can increase outlet velocity losses and reduce relative blading efficiency by 6–8 %. The degree of flow expansion in the rotor blade has a significantly lesser effect on this efficiency and stage power.
- 30 December 2025
- Published by National Technical University Kharkiv Polytechnic Institute in NTU "KhPI" Bulletin: Power and heat engineering processes and equipment
- No. 1,p. 16-28
The Parameters Influence of Noncylindrical Flow on the Elementary Turbine Stage Efficiency Criteria
A one-dimensional calculation method for a turbine stage with arbitrary meridional outlines has been developed. The method allows, taking into account the compressibility of the gas medium, to analyze the influence of the velocity coefficients of the nozzle and rotor cascades, the angles of the one-dimensional spatial axisymmetric flow in front of and behind the rotor cascade, and some other parameters on the degree of reactivity, cascade efficiency, and flow parameters in front of and behind the rotor cascade (RC). The influence of four parameters of non-cylindricality of the flow on the degree of reactivity of the stage and the efficiency coefficients (EffC) is considered. Hydraulic efficiency, which takes into account losses in the stage nozzle and rotor cascades, is virtually independent of the flow stream expansion rate in the rotor cascade and the magnitude of the radial velocity component behind this cascade. Increasing the radial velocity component upstream of the rotor cascade and increasing the average radius of the flow stream in the rotor cascade can reduce hydraulic efficiency by several percent. This can also be observed when the velocity coefficient of the working cascade is considered independent of these parameters. Further research is needed to determine the degree of influence of the radial velocity component on the speed coefficients of the nozzle and rotor cascade. Relative blading efficiency and stage power depend on cascade losses and the magnitude of the outlet velocity losses. A high radial velocity component downstream of the last stages of steam and gas turbines can increase outlet velocity losses and reduce relative blading efficiency by 6–8 %. The degree of flow expansion in the rotor blade has a significantly lesser effect on this efficiency and stage power.
- 28 December 2025
- Published by National Technical University Kharkiv Polytechnic Institute in NTU "KhPI" Bulletin: Power and heat engineering processes and equipment
- No. 2,p. 32-38
Design and Operating Modes of Stop and Control Valves of High-Power Steam Turbines
The operating modes of stop and control valves of high-pressure and intermediate-pressure (low-pressure) sections of existing steam turbines of thermal and nuclear power plants are discussed in the article. Typical operating modes of the valves are defined depending on their functional purpose within the installation, the steam distribution system, the turbine type, and the method of power control. The flow pattern in angle-type valves with one side steam supply into the steam chest is discussed. It is noted that this design is typical for use in high-power steam turbine units operated in Ukraine. As a result, a classification of stop and control valves into three groups is proposed. For each group, recommendations are provided regarding the design of the valve flow-path elements, specifically the main plug and the seat, which contribute to improving their operational efficiency. In addition, to stabilize the flow, the feasibility of installing a special cylindrical shell inside the steam chest is considered, featuring an impermeable sector oriented toward the valve inlet pipe.
- 28 December 2025
- Published by National Technical University Kharkiv Polytechnic Institute in NTU "KhPI" Bulletin: Power and heat engineering processes and equipment
- No. 2,p. 32-38
Design and Operating Modes of Stop and Control Valves of High-Power Steam Turbines
The operating modes of stop and control valves of high-pressure and intermediate-pressure (low-pressure) sections of existing steam turbines of thermal and nuclear power plants are discussed in the article. Typical operating modes of the valves are defined depending on their functional purpose within the installation, the steam distribution system, the turbine type, and the method of power control. The flow pattern in angle-type valves with one side steam supply into the steam chest is discussed. It is noted that this design is typical for use in high-power steam turbine units operated in Ukraine. As a result, a classification of stop and control valves into three groups is proposed. For each group, recommendations are provided regarding the design of the valve flow-path elements, specifically the main plug and the seat, which contribute to improving their operational efficiency. In addition, to stabilize the flow, the feasibility of installing a special cylindrical shell inside the steam chest is considered, featuring an impermeable sector oriented toward the valve inlet pipe.
- 1 January 2021
- Published by Ural Federal University in Journal of Applied Economic Research
- Vol. 20 (4) , 641-665
Intellectual Capital of Technological Transformation of Economy of Industrial Region
The relevance of the research topic is due to the need to strengthen and expand the technological transformation of the Russian economy, which should contribute to the growth of high-tech products production and increase the competitiveness of domestic manufacturers in the world market. The hypothesis of the study is that the component features of the intellectual capital of the industrial region determine the predisposition/absence of predisposition of its economy to make a transition to a new dominant technological structure. The purpose of the scientific research is to identify the types of intellectual capital and which of them form the predisposition of regions to the technological transformation of their economies. During the study, the following tasks were solved: structural elements of intellectual capital that affect the innovative and technological development of the region, namely: education, are justified; innovative competencies; innovative skills; altruism; cognitive and non-cognitive competencies; sensitivity to change and adaptation to technological changes. Extractive, mono-inclusive and multi-inclusive type of intellectual capital of industrial regions, corresponding to the fourth, fifth and sixth technological framework, respectively, is disclosed. A methodology for estimating intellectual capital, which determines the dominant technological structure of the economy of the industrial region, has been developed on the basis of the use of the matrix method and Frobenius norms, which make it possible to conduct research over a long-time interval taking into account the dynamic trends of the main capital elements. The testing of the author's methodology revealed that such territories as Kemerovo Region, Nizhny Novgorod Region, Perm Territory, Republic of Bashkortostan, Republic of Tatarstan, Sverdlovsk Region, Udmurt Republic, Chelyabinsk Region, Chuvash Republic and Yaroslavl Region have intellectual capital for further technological development of the region's economy. The novelty of the obtained results lies in the development of a typology of regions, which enables one to identify the territories most prone to further technological transformation of the economy in the context of types of intellectual capital. The practical significance of the results obtained lies in the possibility of their use by authorities as a tool for developing a strategy for industrial development and structural adjustment of the economy of industrial regions.
- 1 January 2021
- Published by Ural Federal University in Journal of Applied Economic Research
- Vol. 20 (4) , 641-665
Intellectual Capital of Technological Transformation of Economy of Industrial Region
The relevance of the research topic is due to the need to strengthen and expand the technological transformation of the Russian economy, which should contribute to the growth of high-tech products production and increase the competitiveness of domestic manufacturers in the world market. The hypothesis of the study is that the component features of the intellectual capital of the industrial region determine the predisposition/absence of predisposition of its economy to make a transition to a new dominant technological structure. The purpose of the scientific research is to identify the types of intellectual capital and which of them form the predisposition of regions to the technological transformation of their economies. During the study, the following tasks were solved: structural elements of intellectual capital that affect the innovative and technological development of the region, namely: education, are justified; innovative competencies; innovative skills; altruism; cognitive and non-cognitive competencies; sensitivity to change and adaptation to technological changes. Extractive, mono-inclusive and multi-inclusive type of intellectual capital of industrial regions, corresponding to the fourth, fifth and sixth technological framework, respectively, is disclosed. A methodology for estimating intellectual capital, which determines the dominant technological structure of the economy of the industrial region, has been developed on the basis of the use of the matrix method and Frobenius norms, which make it possible to conduct research over a long-time interval taking into account the dynamic trends of the main capital elements. The testing of the author's methodology revealed that such territories as Kemerovo Region, Nizhny Novgorod Region, Perm Territory, Republic of Bashkortostan, Republic of Tatarstan, Sverdlovsk Region, Udmurt Republic, Chelyabinsk Region, Chuvash Republic and Yaroslavl Region have intellectual capital for further technological development of the region's economy. The novelty of the obtained results lies in the development of a typology of regions, which enables one to identify the territories most prone to further technological transformation of the economy in the context of types of intellectual capital. The practical significance of the results obtained lies in the possibility of their use by authorities as a tool for developing a strategy for industrial development and structural adjustment of the economy of industrial regions.
- 1 January 2014
- Published by Izhevsk Institute of Computer Science in Nelineinaya Dinamika
- p. 49-58
Processes of concentration of energy in the formation of rogue waves
- 1 January 2014
- Published by Izhevsk Institute of Computer Science in Nelineinaya Dinamika
- p. 49-58
Processes of concentration of energy in the formation of rogue waves