Els Verstrynge
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Els Verstrynge has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Charlotte Van Steen
Department of Civil Engineering, KU Leuven, Belgium
11 shared publications - Eline Vandecruys
Department of Civil Engineering, Materials and Constructions Section KU Leuven Leuven Belgium
9 shared publications - Geert Lombaert
Structural Mechanics, Civil Engineering Department, KU Leuven
4 shared publications - Constantijn Martens
Department of Civil Engineering, Materials and Constructions Section KU Leuven Leuven Belgium
3 shared publications KU Leuven (Catholic University of Leuven)
3 shared publications- Menno van de Velde
KU Leuven
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (10)
Improving monitoring robustness with embedded AE sensors for damage detection in deteriorated reinforced concrete
The acoustic emission (AE) technique has proven successful in detecting various AE sources in reinforced concrete (RC), ranging from crack growth due to mechanical loading to corrosion of the steel reinforcement. Most research, however, has focused on small specimens in laboratory conditions, with monitoring durations rarely exceeding several weeks. Upscaling to long-term monitoring on actual structures remains a challenge. Major concerns in AE sensor deployment on real RC structures are establishing a durable sensor-to-surface coupling over long periods, the high attenuation of AE waves over larger distances, sensor placement in difficult-to-access areas, and the protection of the highly sensitive sensors against environmental factors. Embedded sensors in the bulk material, so‑called ‘smart aggregates', have been proposed as a promising solution to these issues, as they are permanently bonded within the material, match the impedance, and can be placed closer to the emission sources in case of reinforcement corrosion, while being protected by the surrounding concrete. In an effort to improve robustness of AE set-ups for long-term field application, current work assesses the added value of embedded sensors in combination with surface-mounted sensors in two experiments: (1) during rebar corrosion tests in RC prisms and (2) during mechanical loading of a full-scale RC girder.
- 1 October 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (10)
Open AccessImproving monitoring robustness with embedded AE sensors for damage detection in deteriorated reinforced concrete
The acoustic emission (AE) technique has proven successful in detecting various AE sources in reinforced concrete (RC), ranging from crack growth due to mechanical loading to corrosion of the steel reinforcement. Most research, however, has focused on small specimens in laboratory conditions, with monitoring durations rarely exceeding several weeks. Upscaling to long-term monitoring on actual structures remains a challenge. Major concerns in AE sensor deployment on real RC structures are establishing a durable sensor-to-surface coupling over long periods, the high attenuation of AE waves over larger distances, sensor placement in difficult-to-access areas, and the protection of the highly sensitive sensors against environmental factors. Embedded sensors in the bulk material, so‑called ‘smart aggregates', have been proposed as a promising solution to these issues, as they are permanently bonded within the material, match the impedance, and can be placed closer to the emission sources in case of reinforcement corrosion, while being protected by the surrounding concrete. In an effort to improve robustness of AE set-ups for long-term field application, current work assesses the added value of embedded sensors in combination with surface-mounted sensors in two experiments: (1) during rebar corrosion tests in RC prisms and (2) during mechanical loading of a full-scale RC girder.
- Open Access
- 1 October 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (10)
Insights from acoustic emission monitoring of damage caused by a slow steel corrosion process in reinforced concrete beams
Reinforcement corrosion significantly affects the structural integrity and service life of reinforced concrete (RC) structures. Although acoustic emission (AE) monitoring enables early damage detection and localization, its use during slow natural corrosion and in noisy outdoor environments remains challenging. This study evaluates the feasibility of periodic AE monitoring during natural chloride‑induced corrosion of two pre‑damaged RC beams stored outdoors. Two AE sensor types were assessed under realistic environmental conditions, and a dedicated filtering strategy was developed to separate damage‑related signals from environmental noise. Following main novelties are addressed: (1) the application of periodic AE monitoring rather than continuous AE monitoring, (2) the assessment of slow chloride-induced corrosion in RC instead of accelerated corrosion using a direct current, and (3) the consideration of environmental influences such as rain, wind and solar exposure. The results show that periodic AE monitoring can successfully track damage progression and localize corrosion hotspots. These outcomes underscore the potential of AE monitoring for supporting structural health assessment of RC structures in field conditions.
- 1 October 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (10)
Open AccessInsights from acoustic emission monitoring of damage caused by a slow steel corrosion process in reinforced concrete beams
Reinforcement corrosion significantly affects the structural integrity and service life of reinforced concrete (RC) structures. Although acoustic emission (AE) monitoring enables early damage detection and localization, its use during slow natural corrosion and in noisy outdoor environments remains challenging. This study evaluates the feasibility of periodic AE monitoring during natural chloride‑induced corrosion of two pre‑damaged RC beams stored outdoors. Two AE sensor types were assessed under realistic environmental conditions, and a dedicated filtering strategy was developed to separate damage‑related signals from environmental noise. Following main novelties are addressed: (1) the application of periodic AE monitoring rather than continuous AE monitoring, (2) the assessment of slow chloride-induced corrosion in RC instead of accelerated corrosion using a direct current, and (3) the consideration of environmental influences such as rain, wind and solar exposure. The results show that periodic AE monitoring can successfully track damage progression and localize corrosion hotspots. These outcomes underscore the potential of AE monitoring for supporting structural health assessment of RC structures in field conditions.
- 11 October 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (5) , 5743-5760
Bayesian updating of relationships between crack width and corrosion level in reinforced concrete based on a large set of experimental data
The evaluation of rebar corrosion in reinforced concrete (RC) structures presents a significant challenge for structural engineers, with on‐site visual inspections and crack width measurements playing a key role in the preliminary assessment. A general approach is to use corrosion models to predict the corrosion level of existing structures, and subsequently update these predictions by means of on‐site data. In this process, empirical models are often applied that relate the observed damage, such as corrosion‐induced cracks, to the corrosion level. However, these models have large uncertainties and are often not applicable to conditions that deviate from the test setups used to derive the empirical relations. This research aims to expand the applicability of these practical, existing empirical models for on‐site corrosion assessment through Bayesian updating techniques. To this aim, a Bayesian framework is developed to update crack width–corrosion models. The Bayesian updating methodology is illustrated for a simple regression model, and for a more complex relation that accounts for additional variables. A novel online database (KUL‐edCCRC) is used that is published accompanying this paper. The obtained results illustrate that the updated models have better agreement with the experimental results, and it is found that the confidence intervals of the regression parameters decrease for an increasing number of observations, even for a small number of additional datapoints. The results hence prove the efficiency of the approach to integrate information from new observations with prior information to adjust the crack width–corrosion model for specific conditions or cases, resulting in a more relevant model as more information becomes available.
- 11 October 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (5) , 5743-5760
Bayesian updating of relationships between crack width and corrosion level in reinforced concrete based on a large set of experimental data
The evaluation of rebar corrosion in reinforced concrete (RC) structures presents a significant challenge for structural engineers, with on‐site visual inspections and crack width measurements playing a key role in the preliminary assessment. A general approach is to use corrosion models to predict the corrosion level of existing structures, and subsequently update these predictions by means of on‐site data. In this process, empirical models are often applied that relate the observed damage, such as corrosion‐induced cracks, to the corrosion level. However, these models have large uncertainties and are often not applicable to conditions that deviate from the test setups used to derive the empirical relations. This research aims to expand the applicability of these practical, existing empirical models for on‐site corrosion assessment through Bayesian updating techniques. To this aim, a Bayesian framework is developed to update crack width–corrosion models. The Bayesian updating methodology is illustrated for a simple regression model, and for a more complex relation that accounts for additional variables. A novel online database (KUL‐edCCRC) is used that is published accompanying this paper. The obtained results illustrate that the updated models have better agreement with the experimental results, and it is found that the confidence intervals of the regression parameters decrease for an increasing number of observations, even for a small number of additional datapoints. The results hence prove the efficiency of the approach to integrate information from new observations with prior information to adjust the crack width–corrosion model for specific conditions or cases, resulting in a more relevant model as more information becomes available.
- Open Access
- 1 October 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (10)
Acoustic emission monitoring of a large-scale 50-year-old prestressed concrete bridge girder during an eccentric three-point bending test
Deterioration of reinforced and prestressed concrete structures is one of the main challenges in structural engineering. As the majority of our infrastructure is built around 1960-1980, most structures have reached or will soon reach their design lifetime, giving rise to more structural problems and costs in the coming decades. It is therefore important to develop efficient assessment schemes allowing to assure the safety and reliability of these existing structures and to estimate their residual lifetime. Within the framework of the Bridge|50 research project, a 50-year-old prestressed concrete bridge showing signs of corrosion damage was decommissioned. The bridge girders were recovered and have been subjected to large-scale load tests with varying loading patterns. This paper presents the results acquired during acoustic emission (AE) monitoring of one of the I-shaped girders during a monotonic three-point bending test with an eccentric point load. The results show that the failure mode and location could be detected based on AE activity and zonal AE localization. The onset of concrete cracking was observed by a decrease in peak frequency of the AE signals. Average frequency (AF) and rise angle (RA) value analysis was used to characterize the crack mode, which shifted from tensile to shear mode during bending.
- 1 October 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (10)
Open AccessAcoustic emission monitoring of a large-scale 50-year-old prestressed concrete bridge girder during an eccentric three-point bending test
Deterioration of reinforced and prestressed concrete structures is one of the main challenges in structural engineering. As the majority of our infrastructure is built around 1960-1980, most structures have reached or will soon reach their design lifetime, giving rise to more structural problems and costs in the coming decades. It is therefore important to develop efficient assessment schemes allowing to assure the safety and reliability of these existing structures and to estimate their residual lifetime. Within the framework of the Bridge|50 research project, a 50-year-old prestressed concrete bridge showing signs of corrosion damage was decommissioned. The bridge girders were recovered and have been subjected to large-scale load tests with varying loading patterns. This paper presents the results acquired during acoustic emission (AE) monitoring of one of the I-shaped girders during a monotonic three-point bending test with an eccentric point load. The results show that the failure mode and location could be detected based on AE activity and zonal AE localization. The onset of concrete cracking was observed by a decrease in peak frequency of the AE signals. Average frequency (AF) and rise angle (RA) value analysis was used to characterize the crack mode, which shifted from tensile to shear mode during bending.
- Open Access
- 1 October 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (10)
Experimental investigation into bond characteristics of quartz sand modified enamel coated steel bar in concrete based on AE data
Acoustic emission (AE) is widely used in industries such as aerospace, petroleum, and construction. In civil engineering, especially for concrete structures, AE has been successfully utilized to detect concrete cracking, rebar corrosion, and bond characteristics between steel rebars and concrete. Recently, a quartz sand modified enamel (QSME) coating has been proposed to enhance the corrosion resistance and bond strength of steel rebars in concrete structures. This study focuses on the bond characteristics of QSME-coated steel rebars in concrete based on AE data collected during the tests. Concrete block specimens with steel bars coated with QSME embedded in the center were fabricated in the laboratory. Pull-out tests were conducted under both reversed cyclic and monotonic loadings. AE sensors were attached to the concrete surface to capture the energy released during the debonding process. For comparison, specimens with uncoated, enamel-coated, and epoxy-coated steel bars were also prepared and tested. Analysis of AE captured during the pull-out tests allowed to visualize the bond damage development during the tests and to differentiate between the behavior of the various rebar coating types. Results show that the AE activity released by QSME-coated rebar specimens was higher than that of uncoated, epoxy-coated, and enamel-coated specimens. This can be attributed to the enhanced chemical adhesion and interfacial friction between QSME-coated steel rebars and concrete.
- 1 October 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (10)
Open AccessExperimental investigation into bond characteristics of quartz sand modified enamel coated steel bar in concrete based on AE data
Acoustic emission (AE) is widely used in industries such as aerospace, petroleum, and construction. In civil engineering, especially for concrete structures, AE has been successfully utilized to detect concrete cracking, rebar corrosion, and bond characteristics between steel rebars and concrete. Recently, a quartz sand modified enamel (QSME) coating has been proposed to enhance the corrosion resistance and bond strength of steel rebars in concrete structures. This study focuses on the bond characteristics of QSME-coated steel rebars in concrete based on AE data collected during the tests. Concrete block specimens with steel bars coated with QSME embedded in the center were fabricated in the laboratory. Pull-out tests were conducted under both reversed cyclic and monotonic loadings. AE sensors were attached to the concrete surface to capture the energy released during the debonding process. For comparison, specimens with uncoated, enamel-coated, and epoxy-coated steel bars were also prepared and tested. Analysis of AE captured during the pull-out tests allowed to visualize the bond damage development during the tests and to differentiate between the behavior of the various rebar coating types. Results show that the AE activity released by QSME-coated rebar specimens was higher than that of uncoated, epoxy-coated, and enamel-coated specimens. This can be attributed to the enhanced chemical adhesion and interfacial friction between QSME-coated steel rebars and concrete.
- Open Access
- 1 October 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (10)
Evaluation of Concrete Fatigue Damage with Elastic Wave-based Measurement Techniques
Fatigue damage is a progressive and permanent change in the internal material structure due to cyclic loading. The cyclic loads can be due to wind, waves, temperature variation, and traffic loads. Each cyclic load application introduces micro-damages that accumulate to induce failure. Detecting these micro-damages requires sensitive measuring techniques. Hence this research compares the sensitivity of different measuring techniques applied to fatigue experiments of concrete. The applied NDT are the passive acoustic emission technique (AET) and active ultrasonic measurements. In addition, linear variable differential transformers (LVDTs) are applied as a reference measurement. Accordingly in this research, cylindrical concrete samples are subjected to monotonic and cyclic Brazilian splitting tests. The cylinders are 100 mm in diameter and 150 mm in length. The cyclic load is applied to these samples with a loading frequency of 5 Hz. During the tests, the damage evolution is monitored with AET, ultrasonic measurements and LVDTs. There are eight AE sensors attached to the sample. The two LVDTs are positioned at the center of the sample's front and back side. Besides passively monitoring the acoustic emissions, the AET sensors are also used to do active ultrasonic measurements. The research reports the comparison conducted on the deformations and cracks measured with the LVDTs, the damage growth identified with the AET, and the change in the ultrasonic pulse velocity measurements. In addition, the study also presents the damage analysis capacity of the methods across different types of loading: monotonic, constant amplitude, and stepped fatigue loading. The comparison shows that combination of AET and ultrasonic velocity measurement is a sensitive indicator for damage growth.
- 1 October 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (10)
Open AccessEvaluation of Concrete Fatigue Damage with Elastic Wave-based Measurement Techniques
Fatigue damage is a progressive and permanent change in the internal material structure due to cyclic loading. The cyclic loads can be due to wind, waves, temperature variation, and traffic loads. Each cyclic load application introduces micro-damages that accumulate to induce failure. Detecting these micro-damages requires sensitive measuring techniques. Hence this research compares the sensitivity of different measuring techniques applied to fatigue experiments of concrete. The applied NDT are the passive acoustic emission technique (AET) and active ultrasonic measurements. In addition, linear variable differential transformers (LVDTs) are applied as a reference measurement. Accordingly in this research, cylindrical concrete samples are subjected to monotonic and cyclic Brazilian splitting tests. The cylinders are 100 mm in diameter and 150 mm in length. The cyclic load is applied to these samples with a loading frequency of 5 Hz. During the tests, the damage evolution is monitored with AET, ultrasonic measurements and LVDTs. There are eight AE sensors attached to the sample. The two LVDTs are positioned at the center of the sample's front and back side. Besides passively monitoring the acoustic emissions, the AET sensors are also used to do active ultrasonic measurements. The research reports the comparison conducted on the deformations and cracks measured with the LVDTs, the damage growth identified with the AET, and the change in the ultrasonic pulse velocity measurements. In addition, the study also presents the damage analysis capacity of the methods across different types of loading: monotonic, constant amplitude, and stepped fatigue loading. The comparison shows that combination of AET and ultrasonic velocity measurement is a sensitive indicator for damage growth.
- 16 August 2024
- Published by Elsevier in Engineering Structures
- Vol. 318
Dynamic stiffness parameter assessment of cracked reinforced concrete beams: A numerical and experimental study
- 16 August 2024
- Published by Elsevier in Engineering Structures
- Vol. 318
Dynamic stiffness parameter assessment of cracked reinforced concrete beams: A numerical and experimental study
- 2 August 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 443
Smart aggregates for acoustic emission monitoring of concrete cracking and reinforcement corrosion
- 2 August 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 443
Smart aggregates for acoustic emission monitoring of concrete cracking and reinforcement corrosion
- 19 March 2024
- Published by Elsevier in Engineering Structures
- Vol. 306
Vibration monitoring and acoustic emission sensing during progressive load tests of corroded reinforced concrete beams
- 19 March 2024
- Published by Elsevier in Engineering Structures
- Vol. 306
Vibration monitoring and acoustic emission sensing during progressive load tests of corroded reinforced concrete beams