Mohsen Koohestani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohsen Koohestani has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Richard Perdriau
Cole Suprieure dlectronique de lOuest (ESEO), Angers, France
19 shared publications - Mohamed Ramdani
Cole Suprieure dlectronique de lOuest (ESEO), Angers, France
18 shared publications - Qazi Mashaal Khan
Department of Electrical and Electronic Engineering, ESEO School of Engineering, Angers, France
6 shared publications - Frederic Lafon
VALEO, Creteil, France
4 shared publications - Moktarul Alam
Cole Suprieure dlectronique de lOuest (ESEO), Angers, France
4 shared publications - Alastair R. Ruddle
Vehicle Resilience Technologies VRES, Horiba-MIRA,England, United Kingdom
3 shared publications
Latest Publications
- Open Access
- 21 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 78682-78690
Numerical and Experimental Validation of a Source-to-Harness Near-Field Coupling Model in an Automotive Context
This paper advances the predictive modeling of near-field electromagnetic coupling in automotive wire harnesses by validating the ‘single-wire equivalence’ hypothesis for industrial-scale systems. While previous work established a foundational framework using transmission line theory and the Biot-Savart law on "hand-made" prototypes, this study addresses the transition to produced, stochastic non-uniform harnesses. The methodology employs a two-fold validation: first, a high-fidelity numerical analysis using CST Studio Suite (Cable Studio) to evaluate the impact of random twisting and frequency-dependent losses on model robustness, and second, an empirical assessment using a dedicated experimental testbed with custom PCB terminations for wide parametric impedance variation. The results demonstrate a good correlation between analytical predictions, numerical simulations and measurements from industrial-grade samples. By confirming that the total common-mode response of complex multi-wire harnesses can be accurately represented by a simplified single-conductor model, this work provides a reliable and computationally efficient tool for CISPR 25 compliance, reducing simulation runtimes from hours to seconds without compromising engineering accuracy in real-world automotive environments.
- 21 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 78682-78690
Open AccessNumerical and Experimental Validation of a Source-to-Harness Near-Field Coupling Model in an Automotive Context
This paper advances the predictive modeling of near-field electromagnetic coupling in automotive wire harnesses by validating the ‘single-wire equivalence’ hypothesis for industrial-scale systems. While previous work established a foundational framework using transmission line theory and the Biot-Savart law on "hand-made" prototypes, this study addresses the transition to produced, stochastic non-uniform harnesses. The methodology employs a two-fold validation: first, a high-fidelity numerical analysis using CST Studio Suite (Cable Studio) to evaluate the impact of random twisting and frequency-dependent losses on model robustness, and second, an empirical assessment using a dedicated experimental testbed with custom PCB terminations for wide parametric impedance variation. The results demonstrate a good correlation between analytical predictions, numerical simulations and measurements from industrial-grade samples. By confirming that the total common-mode response of complex multi-wire harnesses can be accurately represented by a simplified single-conductor model, this work provides a reliable and computationally efficient tool for CISPR 25 compliance, reducing simulation runtimes from hours to seconds without compromising engineering accuracy in real-world automotive environments.
- 28 March 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 405
Ultra-sensitive angular displacement sensing using a triangular dielectric resonator
- 28 March 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 405
Ultra-sensitive angular displacement sensing using a triangular dielectric resonator
- 5 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 9756-9764
Enhanced Displacement Sensing via Selective Excitation of Higher-Order Modes in a Cylindrical Dielectric Resonator
This paper presents the systematic design and characterization of a cylindrical dielectric resonator (CDR)-based displacement sensor operating under dual excitation modes. To begin with, the CDR is investigated through radar cross-section analysis to identify the natural resonant modes. Each mode is subsequently excited by using a simple microstrip feed line to evaluate its suitability for displacement sensing in terms of resonant frequency, sensitivity, and dynamic range. Numerical simulations identify the TE011+δ and HEM12δ modes are found to exhibit superior sensing capabilities compared to all other supported modes. Further, a transmission-mode sensor configuration is then proposed, wherein both modes are simultaneously excited using a pair of 180° aligned offset microstrip lines integrated within the same CDR structure, allowing to compare the sensitivity performance of the higher-order mode with respect to the fundamental mode. This dual-mode excitation enables the sensor to harness the complementary features of both modes simultaneously. Comprehensive full-wave simulations are carried out in HFSS to validate the concept, and a prototype is fabricated and experimentally characterized. The measured results show good agreement with simulations, confirming that the proposed sensor achieves a nearly threefold improvement in sensitivity with the higher-order mode, though at the expense of reduced dynamic range.
- 5 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 9756-9764
Enhanced Displacement Sensing via Selective Excitation of Higher-Order Modes in a Cylindrical Dielectric Resonator
This paper presents the systematic design and characterization of a cylindrical dielectric resonator (CDR)-based displacement sensor operating under dual excitation modes. To begin with, the CDR is investigated through radar cross-section analysis to identify the natural resonant modes. Each mode is subsequently excited by using a simple microstrip feed line to evaluate its suitability for displacement sensing in terms of resonant frequency, sensitivity, and dynamic range. Numerical simulations identify the TE011+δ and HEM12δ modes are found to exhibit superior sensing capabilities compared to all other supported modes. Further, a transmission-mode sensor configuration is then proposed, wherein both modes are simultaneously excited using a pair of 180° aligned offset microstrip lines integrated within the same CDR structure, allowing to compare the sensitivity performance of the higher-order mode with respect to the fundamental mode. This dual-mode excitation enables the sensor to harness the complementary features of both modes simultaneously. Comprehensive full-wave simulations are carried out in HFSS to validate the concept, and a prototype is fabricated and experimentally characterized. The measured results show good agreement with simulations, confirming that the proposed sensor achieves a nearly threefold improvement in sensitivity with the higher-order mode, though at the expense of reduced dynamic range.
- Open Access
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 2973-2997
A Comprehensive Review of Multiband Electromagnetic Metasurface Structures for Absorption and Wave Manipulation Applications
Multiband metasurfaces have attracted significant attention as compact and multi-functional platforms for electromagnetic (EM) absorption and wave manipulation. This paper reviews recent advances in multiband absorbers, frequency selective surfaces (FSS), and polarization converters, emphasizing their operating principles, structural configurations, and performance trade-offs. Particular attention is given to the dimensional and resonator aspects of metasurfaces, highlighting how unit-cell geometry, periodicity, and resonant structures directly influence (1) absorption efficiency, angular stability, and operating frequency in absorbers, and (2) spectral selectivity, bandwidth control, and miniaturization in FSS, and (3) conversion efficiency, bandwidth, and polarization purity in polarization converters. These interdependent parameters provide key guidelines for designing compact yet high-performance metasurfaces across different functionalities. Multiband absorbers exploit impedance matching and multi-resonant unit-cell to achieve near-unity absorption across multiple frequency bands, with applications in stealth, electromagnetic interference (EMI) suppression, and RF energy harvesting. FSS structures integrate nested or hybrid resonators within subwavelength cells to deliver high selectivity, angular stability, and miniaturized filtering for communication and radar systems. Polarization converters extend metasurface functionality by enabling linear-to-linear and linear-to-circular transformations within ultra-thin platforms, addressing the growing demand for polarization-agile devices in modern wireless and sensing applications. By identifying limitations and opportunities, this review underscores the role of multiband metasurfaces as enabling technologies for next-generation EM systems.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 2973-2997
Open AccessA Comprehensive Review of Multiband Electromagnetic Metasurface Structures for Absorption and Wave Manipulation Applications
Multiband metasurfaces have attracted significant attention as compact and multi-functional platforms for electromagnetic (EM) absorption and wave manipulation. This paper reviews recent advances in multiband absorbers, frequency selective surfaces (FSS), and polarization converters, emphasizing their operating principles, structural configurations, and performance trade-offs. Particular attention is given to the dimensional and resonator aspects of metasurfaces, highlighting how unit-cell geometry, periodicity, and resonant structures directly influence (1) absorption efficiency, angular stability, and operating frequency in absorbers, and (2) spectral selectivity, bandwidth control, and miniaturization in FSS, and (3) conversion efficiency, bandwidth, and polarization purity in polarization converters. These interdependent parameters provide key guidelines for designing compact yet high-performance metasurfaces across different functionalities. Multiband absorbers exploit impedance matching and multi-resonant unit-cell to achieve near-unity absorption across multiple frequency bands, with applications in stealth, electromagnetic interference (EMI) suppression, and RF energy harvesting. FSS structures integrate nested or hybrid resonators within subwavelength cells to deliver high selectivity, angular stability, and miniaturized filtering for communication and radar systems. Polarization converters extend metasurface functionality by enabling linear-to-linear and linear-to-circular transformations within ultra-thin platforms, addressing the growing demand for polarization-agile devices in modern wireless and sensing applications. By identifying limitations and opportunities, this review underscores the role of multiband metasurfaces as enabling technologies for next-generation EM systems.
- Open Access
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 6, 852-866
Optimization of Time Windowing Technique for Closed-Loop Circuit Cosimulation Using WR Method
Power electronic systems are widely used for efficient power processing across various applications. However, due to their nonlinear behavior and susceptibility to disturbances, modeling and simulation are essential for fully understanding their complex interactions. The waveform relaxation (WR) method is employed to solve subsystems independently, with data exchanged until convergence is reached, offering flexibility in selecting solvers and integration techniques. In power electronics, applying the WR method with time windowing improves simulation stability and accuracy by introducing an equation to determine the optimal number of time windows. A time windowing technique is proposed, for the first time, for the co-simulation of a closed-loop power circuit divided into a first subsystem (converter) and a second subsystem (Proportional-Integral controller). These two subsystems are supposed to be designed by two different entities, which are not allowed to exchange their respective models for intellectual property reasons. The time windowing WR method is applied to transfer the data from subsystem 1 to 2. More importantly, an analytical model for the implementation of a time windowing WR technique is developed. This equation allows a deterministic choice of the number of time windows at each iteration, for convergence, based on windowing size and simulation parameters. Results show consistent output within a specified voltage range, with reduced CPU simulation time compared to co-simulation with an arbitrary selection of numbers of time windows, while being comparable to the full system simulation. The proposed technique is implemented with an input voltage range of 1.8-3 $V$, resulting in consistent outputs of 3.3 $V$ in both continuous- and discrete-time simulation modes. The comparative analysis demonstrates that with an increased number of iterations, the elapsed time is 11.1% and 5.6% faster for continuous- and discrete-time simulation modes, respectively, compared to a co-simulation with time windows. Furthermore, the time windowing WR method closely aligns with the full system result, with only a slight difference in elapsed time. Additionally, to validate the proposed analytical model using the time windowing WR technique in a closed-loop circuit, the buck converter is evaluated and compared without the full system. These results highlight the accuracy of WR with time windowing method and illustrate the quicker convergence achieved when used in circuit co-simulation.
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 6, 852-866
Open AccessOptimization of Time Windowing Technique for Closed-Loop Circuit Cosimulation Using WR Method
Power electronic systems are widely used for efficient power processing across various applications. However, due to their nonlinear behavior and susceptibility to disturbances, modeling and simulation are essential for fully understanding their complex interactions. The waveform relaxation (WR) method is employed to solve subsystems independently, with data exchanged until convergence is reached, offering flexibility in selecting solvers and integration techniques. In power electronics, applying the WR method with time windowing improves simulation stability and accuracy by introducing an equation to determine the optimal number of time windows. A time windowing technique is proposed, for the first time, for the co-simulation of a closed-loop power circuit divided into a first subsystem (converter) and a second subsystem (Proportional-Integral controller). These two subsystems are supposed to be designed by two different entities, which are not allowed to exchange their respective models for intellectual property reasons. The time windowing WR method is applied to transfer the data from subsystem 1 to 2. More importantly, an analytical model for the implementation of a time windowing WR technique is developed. This equation allows a deterministic choice of the number of time windows at each iteration, for convergence, based on windowing size and simulation parameters. Results show consistent output within a specified voltage range, with reduced CPU simulation time compared to co-simulation with an arbitrary selection of numbers of time windows, while being comparable to the full system simulation. The proposed technique is implemented with an input voltage range of 1.8-3 $V$, resulting in consistent outputs of 3.3 $V$ in both continuous- and discrete-time simulation modes. The comparative analysis demonstrates that with an increased number of iterations, the elapsed time is 11.1% and 5.6% faster for continuous- and discrete-time simulation modes, respectively, compared to a co-simulation with time windows. Furthermore, the time windowing WR method closely aligns with the full system result, with only a slight difference in elapsed time. Additionally, to validate the proposed analytical model using the time windowing WR technique in a closed-loop circuit, the buck converter is evaluated and compared without the full system. These results highlight the accuracy of WR with time windowing method and illustrate the quicker convergence achieved when used in circuit co-simulation.
- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (1) , 63-75
Modeling Mutual Inductance in Horizontal Inductors: A Simple Analytical Method Accounting for Multidirectional Near-Field Coupling
This article presents a simple gigahertz transverse electromagnetic cell measurement-based method to determine a multidirectional near-field magnetic coupling model of horizontal inductors, which are widely used in electromagnetic interference filters. Built on this model, a straightforward and accurate analytical method is developed to predict the mutual inductance between two inductors. Initial results, compared with experimental measurements and full-wave simulations, confirm that the analytical approach can reliably and efficiently predict mutual inductance, offering a simpler and less resource-intensive alternative to time-consuming full-wave simulations. Furthermore, the limitations of the proposed analytical method are discussed throughout the article.
- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (1) , 63-75
Modeling Mutual Inductance in Horizontal Inductors: A Simple Analytical Method Accounting for Multidirectional Near-Field Coupling
This article presents a simple gigahertz transverse electromagnetic cell measurement-based method to determine a multidirectional near-field magnetic coupling model of horizontal inductors, which are widely used in electromagnetic interference filters. Built on this model, a straightforward and accurate analytical method is developed to predict the mutual inductance between two inductors. Initial results, compared with experimental measurements and full-wave simulations, confirm that the analytical approach can reliably and efficiently predict mutual inductance, offering a simpler and less resource-intensive alternative to time-consuming full-wave simulations. Furthermore, the limitations of the proposed analytical method are discussed throughout the article.
- 14 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 9 (11) , 1-4
High-Sensitivity Microwave Displacement Sensor Based on a Cylindrical Dielectric Resonator With Split-Frequency Response
This letter presents, for the first time, a highly sensitive microwave sensor for linear displacement detection based on the split-in-frequency principle using a cylindrical dielectric resonator (CDR). The sensor consists of a stator (substrate with a rectangular slot) and a mover (CDR), where displacement is measured by tracking resonant frequency splitting induced by symmetry breaking. When the CDR is centered over the slot, the system exhibits a single transmission zero (f₀); any displacement breaks the symmetry, generating two distinct transmission zeros (Δf), which linearly correlate with displacement. Leveraging this mechanism, the sensor achieves an unprecedented sensitivity of 375 MHz/mm over a 0-3 mm range, the highest reported for split-in-frequency microwave resonator-based displacement sensors, while maintaining excellent linearity. A prototype is fabricated and experimentally validated using a VNA, confirming full-wave simulation (Ansys HFSS) results. Furthermore, real-time displacement estimation is implemented through an inverse regression model operating directly on frequency measurements, with provided regression matrices enabling immediate deployment in practical sensing applications.
- 14 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 9 (11) , 1-4
High-Sensitivity Microwave Displacement Sensor Based on a Cylindrical Dielectric Resonator With Split-Frequency Response
This letter presents, for the first time, a highly sensitive microwave sensor for linear displacement detection based on the split-in-frequency principle using a cylindrical dielectric resonator (CDR). The sensor consists of a stator (substrate with a rectangular slot) and a mover (CDR), where displacement is measured by tracking resonant frequency splitting induced by symmetry breaking. When the CDR is centered over the slot, the system exhibits a single transmission zero (f₀); any displacement breaks the symmetry, generating two distinct transmission zeros (Δf), which linearly correlate with displacement. Leveraging this mechanism, the sensor achieves an unprecedented sensitivity of 375 MHz/mm over a 0-3 mm range, the highest reported for split-in-frequency microwave resonator-based displacement sensors, while maintaining excellent linearity. A prototype is fabricated and experimentally validated using a VNA, confirming full-wave simulation (Ansys HFSS) results. Furthermore, real-time displacement estimation is implemented through an inverse regression model operating directly on frequency measurements, with provided regression matrices enabling immediate deployment in practical sensing applications.
- 10 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 8 (1) , 11-16
Analytical Model for Mutual Inductance Prediction Between Horizontal Inductors With Arbitrary Orientations
This paper presents the validation of an analytical approach for predicting the mutual inductance between two horizontal inductors with arbitrary orientations. A case scenario is developed to demonstrate that the method previously introduced by the authors for particular orientations (parallel and perpendicular) can be effectively extended to arbitrary orientations with good accuracy. The variation of mutual inductance as a function of the angle between the inductor axes is also examined. Furthermore, the study highlights the advantage of employing a comprehensive model that accounts for both primary and secondary coupling surfaces, leading to improved accuracy in determining the global equivalent mutual inductance compared to models that consider only the primary surface. Regardless of orientation, the proposed model provides a computationally efficient and accurate alternative to full-wave simulations for analyzing near-field magnetic coupling between horizontal inductors.
- 10 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 8 (1) , 11-16
Analytical Model for Mutual Inductance Prediction Between Horizontal Inductors With Arbitrary Orientations
This paper presents the validation of an analytical approach for predicting the mutual inductance between two horizontal inductors with arbitrary orientations. A case scenario is developed to demonstrate that the method previously introduced by the authors for particular orientations (parallel and perpendicular) can be effectively extended to arbitrary orientations with good accuracy. The variation of mutual inductance as a function of the angle between the inductor axes is also examined. Furthermore, the study highlights the advantage of employing a comprehensive model that accounts for both primary and secondary coupling surfaces, leading to improved accuracy in determining the global equivalent mutual inductance compared to models that consider only the primary surface. Regardless of orientation, the proposed model provides a computationally efficient and accurate alternative to full-wave simulations for analyzing near-field magnetic coupling between horizontal inductors.
- 10 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (12) , 10785-10790
A Compact, Low-Profile, Vertically-Polarized, Shorted-Top-Plate UWB Monocone Antenna for On-Body WBAN
This paper presents a compact, vertically-polarized, ultra-wideband monocone antenna with low volume (24×24×15 mm3) and weight (8 g) suitable for wearable applications. It features a 96.1% smaller ground plane and a 75.2% lower volume than the smallest-height UWB reference design, while maintaining comparable performance. Its structure comprises a metal cone radiator and a modified circular top-plate shorted with four thin rods to a ground plane as small as the size of a standard four-hole flange-mount SMA connector. Detailed design guidelines are provided, including analyses of current distribution, parametric study, and equivalent circuit models. Both frequency- and time-domain results are measured to validate the design. The measured (simulated) antenna -10 dB bandwidth ranges from 3.1 (2.85) to 10.4 (10.3) GHz, exhibiting a fractional bandwidth of 108.1% (113.3%). The proposed antenna is highly efficient (over 95%) and consistently exhibits stable omni- and bi-directional radiation patterns in the two principal planes, with a stable measured and simulated average realized gain of approximately 1.35 dBi in the ϕ = 0° and θ = 90° radiation direction over the 2.9-7.5 GHz frequency range. As far as the time-domain behavior is concerned, the system fidelity factor is found adequate (higher than 0.85) for the transmission of impulse-type UWB signals in free-space independently of orientation in the azimuthal plane. Additionally, two different on-body exposure scenarios are considered, one with the Tx and Rx antennas positioned over a human forearm and the other near the human ears, to demonstrate the suitability of the proposed design for on-body communication links.
- 10 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (12) , 10785-10790
A Compact, Low-Profile, Vertically-Polarized, Shorted-Top-Plate UWB Monocone Antenna for On-Body WBAN
This paper presents a compact, vertically-polarized, ultra-wideband monocone antenna with low volume (24×24×15 mm3) and weight (8 g) suitable for wearable applications. It features a 96.1% smaller ground plane and a 75.2% lower volume than the smallest-height UWB reference design, while maintaining comparable performance. Its structure comprises a metal cone radiator and a modified circular top-plate shorted with four thin rods to a ground plane as small as the size of a standard four-hole flange-mount SMA connector. Detailed design guidelines are provided, including analyses of current distribution, parametric study, and equivalent circuit models. Both frequency- and time-domain results are measured to validate the design. The measured (simulated) antenna -10 dB bandwidth ranges from 3.1 (2.85) to 10.4 (10.3) GHz, exhibiting a fractional bandwidth of 108.1% (113.3%). The proposed antenna is highly efficient (over 95%) and consistently exhibits stable omni- and bi-directional radiation patterns in the two principal planes, with a stable measured and simulated average realized gain of approximately 1.35 dBi in the ϕ = 0° and θ = 90° radiation direction over the 2.9-7.5 GHz frequency range. As far as the time-domain behavior is concerned, the system fidelity factor is found adequate (higher than 0.85) for the transmission of impulse-type UWB signals in free-space independently of orientation in the azimuthal plane. Additionally, two different on-body exposure scenarios are considered, one with the Tx and Rx antennas positioned over a human forearm and the other near the human ears, to demonstrate the suitability of the proposed design for on-body communication links.
- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. PP (00189375) , 1-9
Modeling and Characterization of Near-Field Coupling Between Components and Harnesses in Presence of Ground Planes: A Case Study
This article presents an extension of an analytical model designed to predict electromagnetic (EM) near-field coupling in automotive electronic systems. It incorporates a printed circuit board (PCB) into the modeling framework to better reflect real-world configurations and accurately account for EM interactions and signal integrity. The noise source is modeled as a single-turn metallic loop above a PCB ground plane, while the victim is represented by a wire positioned near the noise source. The proposed analytical method takes into account transmission line equations and the Biot–Savart law to calculate mutual inductance while optimizing computational efficiency. A detailed evaluation of the required number of wire sections and image loops ensures accurate modeling of magnetic field interactions. The analytical model was validated through full-wave simulations in Ansys HFSS and a measurement campaign. Results demonstrated good agreement between analytical predictions, simulations, and measurements across a frequency range of 1 MHz to 1 GHz, with deviations limited to acceptable margins. A key advantage of this approach is its computational efficiency, achieving results in seconds compared to hours required by full-wave simulations for the same number of frequencies. This optimization is particularly valuable in industrial contexts, where rapid design iteration is essential. By bridging the gap between analytical simplicity and real-world complexity, this study demonstrates the potential of the developed analytical model as a robust and time-efficient alternative for EM compatibility analysis.
- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. PP (00189375) , 1-9
Modeling and Characterization of Near-Field Coupling Between Components and Harnesses in Presence of Ground Planes: A Case Study
This article presents an extension of an analytical model designed to predict electromagnetic (EM) near-field coupling in automotive electronic systems. It incorporates a printed circuit board (PCB) into the modeling framework to better reflect real-world configurations and accurately account for EM interactions and signal integrity. The noise source is modeled as a single-turn metallic loop above a PCB ground plane, while the victim is represented by a wire positioned near the noise source. The proposed analytical method takes into account transmission line equations and the Biot–Savart law to calculate mutual inductance while optimizing computational efficiency. A detailed evaluation of the required number of wire sections and image loops ensures accurate modeling of magnetic field interactions. The analytical model was validated through full-wave simulations in Ansys HFSS and a measurement campaign. Results demonstrated good agreement between analytical predictions, simulations, and measurements across a frequency range of 1 MHz to 1 GHz, with deviations limited to acceptable margins. A key advantage of this approach is its computational efficiency, achieving results in seconds compared to hours required by full-wave simulations for the same number of frequencies. This optimization is particularly valuable in industrial contexts, where rapid design iteration is essential. By bridging the gap between analytical simplicity and real-world complexity, this study demonstrates the potential of the developed analytical model as a robust and time-efficient alternative for EM compatibility analysis.