YRYu. Rieznikov

Yu. Rieznikov

*This is an algorithmically generated author record based on publicly available information.

Yu. Rieznikov has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    JUSTICATION OF THE REGUIRED NUMBER OF COMPONENTS OF THE INFORMATION AND MEASURING SYSTEM FOR COLLCTING AND PROCESSING INFORMATION ON THE IMPACT OF EXPLOSION FACTORS ON PERSONNEL IN A PROTECTIVE STRUCTURE

    by O Kuzmich, M Andrushko, P Arkushenko, Y Rieznikov

    Ensuring the safety and protection of the population in Ukraine, objects of the national economy, and national wealth of the country from the negative consequences of a full-scale war should be considered as an integral part of the state policy of national security. The stability of the functioning of a protective structure is understood as its ability to reliably protect personnel and the population in emergency situations and perform all its functions. It should be noted that currently there are no national technical regulations (substantiated technical recommendations) for the selection of information and measuring equipment for conducting tests to assess the impact of explosion factors on personnel and the population in a protective structure. At the same time, there is an acute problem and a significant need to assess the impact of explosion factors on the preservation of the lives of personnel and the population in protective structures of various functional purposes. The research is aimed at substantiating the selection criteria and the required number of components of the information and measuring system for collecting and processing information on the impact of explosion factors on personnel and the population in a protective structure. To determine the degree of protection, IBS with a set of appropriate sensors and software for processing and analyzing the obtained characteristics are used. The main striking factor of the explosion, if we do not take into account small striking elements (fragments), is the air shock wave, which spreads from the center of the explosion in all directions. The criterion for the resistance of protective structures to the influence of the air shock wave is the maximum value of the excess pressure at which the protective structures and equipment are preserved or receive slight destruction (damage). To obtain a substantiated assessment, it is necessary to measure the pressure of the blast wave from the outside and inside the protective structure. This task is solved using sensors (primary converters), signal amplifiers and measuring and recording equipment. The team of authors proposed a rational structural scheme of IBS for use in tests to verify the characteristics of protective structures and assess the factors of the explosion's impact on personnel and the population inside such a structure.


  • Open Access

    THE STATE OF THE SYSTEM OF TRAINING OF ENGINEERING TEST PERSONNEL OF WEAPONS AND MILITARY EQUIPMENT

    by A Lernatovych, O Rieznikovа, M Pohasii, Y Rieznikov, O Chebakova, V Chemerys

    High-quality training of engineering test personnel for weapons and military equipment is a key factor in improving the combat capability of the Armed Forces of Ukraine and other defense forces, as a fast, high-quality and successful testing process of new (modernized) weapons and military equipment models and positive results are the key to equipping troops with weapons and military equipment. The article analyzes the problematic issues of the existing system of training of engineering test personnel. It is shown that at present, the level of knowledge of a test engineer is not taken into account during the training of a test engineer due to the lack of “feedback” at the stages of development of specialists. In order to solve this problem, it is proposed to integrate an approach based on the assessment of the test engineer's knowledge and competencies into the system of training of engineering test personnel of weapons and military equipment. The defined approach makes it possible to assess the dynamics of the development of a test engineer and identify areas for further improvement. The competencies are described, the values of the weighting coefficients are determined, which should change in accordance with the priority of competencies at each stage of the career. An example of assessing the level of competencies of a test engineer is given, and an improved scheme for training weapons and military equipment is formed. It is expected that the improved engineering test personnel training system will have a positive impact on the development of professional skills of test engineers, help update their knowledge and skills, allow them to quickly adapt to new challenges, and introduce innovative approaches to testing. The next step in improving the engineering test personnel training system is to develop a methodology for assessing competencies for a particular specialization and to form a model for developing the competencies of a test engineer (at the stages of professional growth).

  • Open Access

    METHODOLOGY FOR ASSESSING THE ACOUSTIC DETECTABILITY OF GROUND ROBOTIC COMPLEXES DURING TESTING

    by Y. Rieznikov, П.л. Аркушенко, O. Rieznikova, М.в. Андрушко, Ю.в. Рєзніков, О.г. Рєзнікова

    The article addresses the challenges of evaluating the acoustic detectability of ground robotic complexes (GRC) in military applications. Existing national and international standards (DSTU GOST 23941:2004, ISO 3744) are analyzed, revealing their limitations in addressing dynamic operational conditions, spectral noise composition, and military-specific requirements. A novel methodology is proposed, integrating real-environment measurements, spectral analysis, detection range assessment, and signal- to-noise ratio (SNR) evaluation. Key parameters such as noise intensity, frequency distribution, and directional characteristics are emphasized to optimize GRC stealth. The methodology aligns with NATO standards (MIL-STD-1474E) and introduces a comprehensive approach to acoustic signature reduction. The study highlights that traditional noise measurement methods, designed for stationary or civilian machinery, fail to account for GRC-specific factors like variable speed, terrain interactions, and combined noise sources (e.g., engines, cooling systems). Spectral analysis is prioritized to distinguish low-frequency noises (propagating over long distances) from high- frequency components (absorbed by the environment). The proposed framework includes noise visualization tools and AI-driven data integration for predictive detection modeling. Experimental validation is suggested through field tests under diverse conditions (urban, forested, uneven terrain). The article underscores the importance of minimizing structural and aerodynamic noise through design modifications, such as vibration dampening and stealth materials. Compliance with Level 1 and Level 2 acoustic detectability thresholds (as per NATO) is critical for ensuring GRC survivability in combat scenarios. The research concludes that the proposed methodology enhances GRC operational effectiveness by reducing auditory detection risks. Future work should focus on real-time noise masking algorithms and cross-platform adaptability. This study provides actionable insights for defense engineers and certification bodies, contributing to the advancement of military robotics in modern warfare.

  • Open Access

    ERROR ANALYSIS OF THE MULTI-STAGE METHOD OF DETERMINING THE TRAJECTORY PARAMETERS OF LOW-ORBITAL SPACE OBJECTS DURING EXPERIMENTAL TESTING OF INFORMATION AND COMMUNICATION CONTROL SYSTEMS AND SPACE ENVIRONMENT ANALYSIS

    by Yu. Rieznikov, С.в. Орлов, I. Titov, Ю.в. Рєзніков, І.в. Тітов

    The repulsion of large-scale Russian aggression and other existing threats in the sphere of national security and defense of Ukraine require the accelerated development of space information technologies in the state and determine the urgent need to improve the organization of the use of space technologies in the interests of defense, the creation of the necessary organizational structures, the deployment of modern information and communication systems with the aim of increasing space situational awareness. One of the main tasks of space situational awareness is the necessary level of knowledge about outer space, the characteristics of space objects of various origins, previous, current and projected knowledge about the parameters of their orbital motion. This task becomes particularly relevant due to the adversary's use of its space means of special and radio- technical intelligence and means of commercial organization, including microsatellites, as a result of which there is a need to control the routes of the passage of surveillance satellites with the subsequent development of plans for camouflage and other types of countermeasures and protection of troops. The article formulates the task of evaluating the effectiveness of information and communication systems that are being improved as part of conducting experimental tests as part of the System of Control and Analysis of the Space Situation, which are based on algorithms for processing the results of optical observations for maintaining a catalog of space objects. The value of the systematic errors of the initial determination of the motion parameters of a low-orbit circum-circular space object based on the results of optical observations using a multi-stage method based on the approximation of measurements by a circular model and consistent evaluation of planar and in-plane parameters of the orbit was evaluated. Methodological errors introduced when describing the circular motion model of a low-orbit space object along an elliptical trajectory with a small eccentricity are: according to the parameters of the orbit plane, up to 0,80; by period - up to 4 minutes; by the latitude argument – 0,2. In the case when the observation interval does not exceed 1 minute, the maximum errors in angular parameters do not exceed 0,1, which is quite acceptable for solving practical tasks of determining the orbits of small space objects. The systematic error of the period estimation can be compensated by joint processing of the results of optical observations on different turns of the flight.

  • Open Access

    METHOD FOR PRELIMINARY ASSESSMENT OF THE TECHNO-ECONOMIC LEVEL OF MECHANICAL SYSTEMS FOR HUMANITARIAN DEMINING

    by А.в. Власов, I. Gukov, O. Matiushchenko, Yu. Rieznikov, І.о. Жуков, О.г. Матющенко

    Currently, Ukraine is suffering from the pressure of an aggressor who is doing everything in its power to wipe our country off the face of the earth. However, the Armed Forces of Ukraine and other Defense Forces are putting up a worthy resistance. The war continues. Nevertheless, life does not stand still. Problems arise that need to be addressed now, without waiting for the end of the conflict. One such problem is the presence of mined territories. A methodology for assessing the techno-economic level of mechanical systems for humanitarian demining has been proposed, utilizing only a priori data without conducting field tests, the methodology of which is implemented in CWA 15044. The initial data for the methodology include all available technical, operational, and other characteristics provided by the manufacturer of the mechanical demining system, existing data on the experience of its use in demining tasks, and information on previous or other types of tests of the sample. The initial data for the methodology include all available technical, operational, and other characteristics provided by the manufacturer of the mechanical demining system, as well as existing data on its usage experience (if available) in demining tasks, the availability of working design documentation, standard operating procedures, information on previous or other types of tests of the sample (if any), and other relevant data. The limitation of the methodology is that it only uses the data provided (claimed by the manufacturer), and no experimental field tests are conducted (such tests may be carried out later if a positive assessment of the initial evaluation of the sample is received). The methodology is based on the theory of expert evaluation. In the first stage, an expert commission is formed to conduct the expert assessment of the techno-economic level of the mechanical demining system sample. In the second stage, the initial data are compiled. Experts analyze the informational materials provided by the developer regarding the prospective project, as well as any other necessary documented information. In the third stage, the techno-economic level of the proposed sample is assessed in relation to existing known samples (R1), and the best mechanical demining systems with similar purposes are selected for comparison. The advantage of this methodology compared to more complex evaluation algorithms is that, as a result of the sequential execution of all stages, a single number (scalar) can be obtained for each competing sample, reflecting its techno-economic level. This allows for easy comparison, unlike cases where vector methods of comparison are used.

  • Open Access

    SIMULATION MODEL FOR UNMANNED AERIAL COMPLEXES AT LAUNCHING POSITIONS SURVIVABILITY ASSESSEMENT

    by С.в. Орлов, S. Zvyhlianych, Yu. Rieznikov, Ye. Porynos, С.м. Звиглянич, Ю.в. Рєзніков, Є.о. Поринос

    The relevance of issues related to the justification of the rational approaches to the combat operations planning using unmanned aircraft systems, which are now assigned the main role in attacking the enemy by fire, necessitates the development of methods for evaluating such actions. The issue of increasing the survivability of unmanned aircraft systems under combat conditions is of important applied importance. The subject of the study is the unmanned aircraft systems application under the conditions of enemy action planning process. The article uses operations research methods. The purpose of the work is to develop a simulation model in the form of an algorithm, that allows conducting process research based on quantitative estimates and substantiating decisions aimed at increasing the survivability of unmanned aircraft systems under conditions of enemy action. By varying the parameters of the simulation model, it becomes possible to develop the most rational solutions for the unmanned aircraft systems use, ensuring the maximum level of their survivability under the specific conditions of combat operations. A simulation model is proposed, with the help of which it is possible to quantitatively evaluate decisions regarding the tactics of using UAV and finding ways to increase the level of their survivability under the conditions of enemy fire. During the implementation of the proposed model, statistics of the results of the simulated fire impact are accumulated, that allows to calculate estimates of the probability of UAV, deployed at the launching positions, to get various degrees of damage. By varying the specified parameters, it becomes possible to develop the most rational solutions aimed at increasing the survivability of UAV under the specific conditions of combat activities performing. The proposed simulation model for the survivability of unmanned aircraft systems assessment may be used in the decision support system for the appropriate level commander.

  • Open Access

    CERTIFICATION OF ELEMENTS OF PROTECTIVE STRUCTURES: PROBLEM ISSUES AND THE WAYS OF THEIR SOLUTIONS

    by В.м. Павлов, O. Matiushchenko, А.в. Власов, В.м. Мирунко, Yu. Rieznikov, О.г. Матющенко

    With the beginning of armed aggression on the russia, the pace of production of protective structures, which are a necessity for the protection of the civilian population and for use in the defense sector, is increasing. Together with the requirement to increase the pace of production of protective structures, there is a question of standardizing requirements for construction products used in production and assessing the conformity of finished products. In order to determine the problematic issues of certification of elements of protective structures, an analysis of regulatory and legal documentation in the specified field was carried out in the work. Currently, there are no requirements for the Technical Regulations of construction products for their manufacture. At the same time, manufacturers are forced to carry out parallel procedures for assessing the conformity of products in accordance with the requirements of the Technical Regulations and other requirements to confirm the ability of products to be used in the construction of protective structures. The paper proposes steps to optimize the assessment of the compliance of elements of protective structures, which will lead to a reduction in the terms of certification work, and therefore costs.


  • Open Access

    Підвищення надійності навігаційного забезпечення військових споживачів інформації глобальних навігаційних супутникових систем

    by В.п. Деденок, Ю.в. Рєзніков, С.і. Березіна

    Для організації контролю цілісності глобальних навігаційних супутникових систем в інтересах військових споживачів запропонований критерій відповідності точності навігаційних рішень заданим вимогам, який на відміну від традиційних не вимагає безпосереднього порівняння конкуруючих оцінок по усіх можливих напрямах і ґрунтується на використанні поняття мінімального власного числа матриці. Запропонований метод компенсації ефемеридної похибки на основі формування моделі похибки з можливістю екстраполяції її значень за часом і здійснення псевдодиференціального режиму без організації реального каналу зв'язку з базовою станцією.