Yu Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yu Tang has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Dunwen Liu
School of Resources and Safety Engineering, Central South University, Changsha 410083, China
18 shared publications Dunwen Liu
School of Resources and Safety Engineering, Central South University, Changsha 410083, China
9 shared publications- Wanmao Zhang
School of Resources and Safety Engineering, Central South University, Changsha 410083, China
9 shared publications - Yinghua Jian
School of Resources and Safety Engineering, Central South University, Changsha 410083, China
7 shared publications - Li Jin
Tandon School of Engineering, New York University, New York, NY, USA
6 shared publications Yinghua Jian
Central South University
6 shared publications
Latest Publications
- Open Access
- 2 August 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (15) , 7813
Evaluating Water and Soil Resource Carrying Capacity from the Production–Living–Ecological Space Perspective: A Case Study of Hunan Province, China
Quantifying water and soil resource (WSR) carrying capacity is crucial for sustainable regional development. However, humid hilly regions like Hunan Province remain understudied, facing ecological vulnerability despite abundant water resources. This study constructs a comprehensive evaluation index system based on the Production–Living–Ecological Space (PLES) framework and applies an improved entropy weight technique for order preference by similarity to ideal solution (TOPSIS) method; a coupling coordination model among production, living, and ecological space subsystems; and an obstacle degree model to annual-scale data from 2011 to 2022 for Hunan’s 14 prefecture-level cities. The results show the following: (1) The overall WSR carrying capacity index increased from 0.28 in 2011 to 0.52 in 2022, indicating a continuous improvement in carrying capacity during the study period. Spatially, the carrying capacity is higher in central and eastern regions and lower in western and southern areas, with most cities falling into low, relatively low, or medium categories. (2) The coupling coordination degree among the three PLES subsystems improved but remained in a transitional stage (0.30–0.45), indicating unbalanced development. (3) The top five obstacle factors are water yield modulus, length of water supply pipelines, ecological water use rate, gross domestic product (GDP) per capita, and per capita water resources—with the ecological water use rate exceeding 19% in every year of the study period. These findings highlight the need to coordinate production, living, and ecological subsystems to improve WSR carrying capacity. Targeted strategies, including efficient water use, optimized resource allocation, and ecological protection, are recommended for sustainable water–soil resource management in Hunan Province.
- 2 August 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (15) , 7813
Open AccessEvaluating Water and Soil Resource Carrying Capacity from the Production–Living–Ecological Space Perspective: A Case Study of Hunan Province, China
Quantifying water and soil resource (WSR) carrying capacity is crucial for sustainable regional development. However, humid hilly regions like Hunan Province remain understudied, facing ecological vulnerability despite abundant water resources. This study constructs a comprehensive evaluation index system based on the Production–Living–Ecological Space (PLES) framework and applies an improved entropy weight technique for order preference by similarity to ideal solution (TOPSIS) method; a coupling coordination model among production, living, and ecological space subsystems; and an obstacle degree model to annual-scale data from 2011 to 2022 for Hunan’s 14 prefecture-level cities. The results show the following: (1) The overall WSR carrying capacity index increased from 0.28 in 2011 to 0.52 in 2022, indicating a continuous improvement in carrying capacity during the study period. Spatially, the carrying capacity is higher in central and eastern regions and lower in western and southern areas, with most cities falling into low, relatively low, or medium categories. (2) The coupling coordination degree among the three PLES subsystems improved but remained in a transitional stage (0.30–0.45), indicating unbalanced development. (3) The top five obstacle factors are water yield modulus, length of water supply pipelines, ecological water use rate, gross domestic product (GDP) per capita, and per capita water resources—with the ecological water use rate exceeding 19% in every year of the study period. These findings highlight the need to coordinate production, living, and ecological subsystems to improve WSR carrying capacity. Targeted strategies, including efficient water use, optimized resource allocation, and ecological protection, are recommended for sustainable water–soil resource management in Hunan Province.
- Open Access
- 12 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 6034
Water Footprint-Based Optimization of Crop Planting Structure for Sustainable Agricultural Water Management in Hunan Province, China
Given the mounting pressure on agricultural water resources in China, which poses a threat to agricultural production safety, this study focuses on Hunan Province and analyzes five major crops over the period 2012–2022. Using a water footprint (WF) accounting method, it quantifies grey water from non-point source pollution and optimizes planting structures under 5%, 10%, and 15% water-saving scenarios. The results indicate that crop water footprints per unit mass follow the descending order: oilseeds, leaf tobacco, rice, fruits, and vegetables. Regarding water footprint components, green water footprint accounts for the largest proportion, playing a dominant role in crop water use, followed by grey water footprint. Blue water footprint and irrigation losses contribute the least. After optimization, under the 5% and 10% water-saving scenarios, the cultivated areas for rice, oilseeds, and leaf tobacco decreased compared to 2021, while those for vegetables and fruits increased. Under the 15% water-saving scenario, all crop planting areas were reduced relative to 2021. The optimized crop planting structure enhanced water use efficiency by 0.35%, 0.58% and 0.77%, respectively, under water-saving scenarios of 5%, 10% and 15%. These results provide a scientific basis for sustainable agricultural water management in Hunan Province.
- 12 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 6034
Open AccessWater Footprint-Based Optimization of Crop Planting Structure for Sustainable Agricultural Water Management in Hunan Province, China
Given the mounting pressure on agricultural water resources in China, which poses a threat to agricultural production safety, this study focuses on Hunan Province and analyzes five major crops over the period 2012–2022. Using a water footprint (WF) accounting method, it quantifies grey water from non-point source pollution and optimizes planting structures under 5%, 10%, and 15% water-saving scenarios. The results indicate that crop water footprints per unit mass follow the descending order: oilseeds, leaf tobacco, rice, fruits, and vegetables. Regarding water footprint components, green water footprint accounts for the largest proportion, playing a dominant role in crop water use, followed by grey water footprint. Blue water footprint and irrigation losses contribute the least. After optimization, under the 5% and 10% water-saving scenarios, the cultivated areas for rice, oilseeds, and leaf tobacco decreased compared to 2021, while those for vegetables and fruits increased. Under the 15% water-saving scenario, all crop planting areas were reduced relative to 2021. The optimized crop planting structure enhanced water use efficiency by 0.35%, 0.58% and 0.77%, respectively, under water-saving scenarios of 5%, 10% and 15%. These results provide a scientific basis for sustainable agricultural water management in Hunan Province.
- Open Access
- 17 April 2025
- Published by MDPI AG in Fractal and Fractional
- Vol. 9 (4) , 254
Compression Damage Precursors of Silane-Protected Concrete Under Sulfate Erosion Based on Acoustic Emission Characterization
Concrete materials exposed to sulfate-rich geological environments are prone to structural durability degradation due to chemical erosion. Silane-based protective materials can enhance the durability of concrete structures under harsh environmental conditions. This study investigates the evolution of acoustic emission (AE) precursor characteristics in silane-protected, sulfate-eroded concrete specimens during uniaxial compression failure. Unlike existing research focused primarily on protective material properties, this work establishes a novel framework linking “silane treatment–AE parameters–failure precursor identification”, thereby bridging the research gap in damage evolution analysis of sulfate-eroded concrete under silane protection. Uniaxial compressive strength tests and AE monitoring were conducted on both silane-protected and unprotected sulfate-eroded concrete specimens. A diagnostic system integrating dynamic analysis of the acoustic emission b-value, mutation detection of energy concentration index ρ, and multifractal detrended fluctuation analysis (MF-DFA) was developed. The results demonstrate that silane-protected specimens exhibited a distinct b-value escalation followed by an abrupt decline prior to peak load, whereas unprotected specimens showed disordered fluctuations. The mutation point of energy concentration ρ for silane-protected specimens occurred at 0.83 σc, representing a 9.2% threshold elevation compared to 0.76 σc for unprotected specimens, confirming delayed damage accumulation in protected specimens. MF-DFA revealed narrowing spectrum width () in unprotected specimens, indicating reduced heterogeneity in AE signals, while protected specimens maintained significant multifractal divergence. peak localization revealed that weak AE signals dominated during early loading stages in both groups, with crack evolution primarily involving sliding and friction. During the mid-late elastic phase, crack propagation became the predominant failure mode. Experimental evidence confirms the engineering significance of silane protection in extending service life of concrete structures in sulfate environments. The proposed multi-parameter AE diagnostic methodology provides quantitative criteria for the safety monitoring of protected concrete structures in sulfate-rich conditions.- 17 April 2025
- Published by MDPI AG in Fractal and Fractional
- Vol. 9 (4) , 254
Open AccessCompression Damage Precursors of Silane-Protected Concrete Under Sulfate Erosion Based on Acoustic Emission Characterization
Concrete materials exposed to sulfate-rich geological environments are prone to structural durability degradation due to chemical erosion. Silane-based protective materials can enhance the durability of concrete structures under harsh environmental conditions. This study investigates the evolution of acoustic emission (AE) precursor characteristics in silane-protected, sulfate-eroded concrete specimens during uniaxial compression failure. Unlike existing research focused primarily on protective material properties, this work establishes a novel framework linking “silane treatment–AE parameters–failure precursor identification”, thereby bridging the research gap in damage evolution analysis of sulfate-eroded concrete under silane protection. Uniaxial compressive strength tests and AE monitoring were conducted on both silane-protected and unprotected sulfate-eroded concrete specimens. A diagnostic system integrating dynamic analysis of the acoustic emission b-value, mutation detection of energy concentration index ρ, and multifractal detrended fluctuation analysis (MF-DFA) was developed. The results demonstrate that silane-protected specimens exhibited a distinct b-value escalation followed by an abrupt decline prior to peak load, whereas unprotected specimens showed disordered fluctuations. The mutation point of energy concentration ρ for silane-protected specimens occurred at 0.83 σc, representing a 9.2% threshold elevation compared to 0.76 σc for unprotected specimens, confirming delayed damage accumulation in protected specimens. MF-DFA revealed narrowing spectrum width () in unprotected specimens, indicating reduced heterogeneity in AE signals, while protected specimens maintained significant multifractal divergence. peak localization revealed that weak AE signals dominated during early loading stages in both groups, with crack evolution primarily involving sliding and friction. During the mid-late elastic phase, crack propagation became the predominant failure mode. Experimental evidence confirms the engineering significance of silane protection in extending service life of concrete structures in sulfate environments. The proposed multi-parameter AE diagnostic methodology provides quantitative criteria for the safety monitoring of protected concrete structures in sulfate-rich conditions. - Open Access
Study on the Vibration Propagation Law and Stress Distribution Characteristics in Double-Arch Tunnels During Blasting
Highway tunnel construction in mountainous areas of China has been developing rapidly. The influence of drilling and blasting on the existing tunnel structure has become a key factor affecting the safety and stability of tunnel construction. The double-arch tunnel has unique structural characteristics. The propagation characteristics of blasting vibrations and the resulting stress responses exhibit a certain level of complexity. There is little research on the influence of single-line blasting excavation of double-arch tunnel on the other line tunnel. This paper analyzes the blasting vibration of a double-arch tunnel by ANSYS/LS-DYNA. The propagation law of blasting vibration velocity and stress distribution law of blasting vibration in different sections of the tunnel is revealed. At the same time, the relationship between the peak particle velocity (PPV) and tensile stress is established, and the threshold vibration velocity is proposed. It provides a scientific basis for tunnel design and construction. The propagation of blasting vibration in the adjacent roadway is affected by the middle pilot tunnel. The peak vibration velocity of different parts decreases with the increase in distance. The monitoring of vibration velocity and stress in section A of the right line of the adjacent tunnel should be strengthened, especially in the tunnel vault, blast-facing side wall, and arch foot. The difference in vibration strength across different tunnel parts provides a basis for optimizing the structure. It helps strengthen the parts susceptible to vibration during the design stage of the multi-arch tunnel, improving the tunnel’s safety and stability.
Open AccessStudy on the Vibration Propagation Law and Stress Distribution Characteristics in Double-Arch Tunnels During Blasting
Highway tunnel construction in mountainous areas of China has been developing rapidly. The influence of drilling and blasting on the existing tunnel structure has become a key factor affecting the safety and stability of tunnel construction. The double-arch tunnel has unique structural characteristics. The propagation characteristics of blasting vibrations and the resulting stress responses exhibit a certain level of complexity. There is little research on the influence of single-line blasting excavation of double-arch tunnel on the other line tunnel. This paper analyzes the blasting vibration of a double-arch tunnel by ANSYS/LS-DYNA. The propagation law of blasting vibration velocity and stress distribution law of blasting vibration in different sections of the tunnel is revealed. At the same time, the relationship between the peak particle velocity (PPV) and tensile stress is established, and the threshold vibration velocity is proposed. It provides a scientific basis for tunnel design and construction. The propagation of blasting vibration in the adjacent roadway is affected by the middle pilot tunnel. The peak vibration velocity of different parts decreases with the increase in distance. The monitoring of vibration velocity and stress in section A of the right line of the adjacent tunnel should be strengthened, especially in the tunnel vault, blast-facing side wall, and arch foot. The difference in vibration strength across different tunnel parts provides a basis for optimizing the structure. It helps strengthen the parts susceptible to vibration during the design stage of the multi-arch tunnel, improving the tunnel’s safety and stability.
- 15 November 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (4) , 1271-1287
Clustering evaluation of internal structural defects in ancient and replica antique green bricks based on ultrasonic detection
- 15 November 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (4) , 1271-1287
Clustering evaluation of internal structural defects in ancient and replica antique green bricks based on ultrasonic detection
- Open Access
- 15 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (10) , 4201
Analysis of the Impact of the Former Abandoned Dregs of Mountain Highways on the Construction and Safety of New Bridge Pile Foundations
In highway reconstruction and expansion projects, the impact of the abandoned dreg body produced by the original highway on the new bridge project cannot be ignored. If the abandoned dregs are not handled properly, they will cause great threat to the operation of the new highway as well as to the safety of the surrounding environment and personnel. In this paper, based on a South China highway reconstruction and expansion project, a model of the abandoned dreg body, bridge pile and anti-slide pile is established with the help of finite difference software FLAC3D 5.0. The calculation results show that compared with burying the anti-slide pile, slope cutting is more effective for improving the stability of the abandoned dreg body. Under the action of vertical force intensity, the displacement of the top of the pile increases continuously, and the maximum bending moment of the pile body increases firstly and then decreases. The pile displacement and bending moment of the bridge pile increase significantly in the storm condition compared with the normal condition. In addition, the abandoned dreg body hazard prevention and control technical measures are studied. The impacts of different locations of anti-slide pile burial on bridge piles are analyzed and compared, and it is determined that the optimal location of anti-slide pile burial is the middle of the secondary slope.
- 15 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (10) , 4201
Open AccessAnalysis of the Impact of the Former Abandoned Dregs of Mountain Highways on the Construction and Safety of New Bridge Pile Foundations
In highway reconstruction and expansion projects, the impact of the abandoned dreg body produced by the original highway on the new bridge project cannot be ignored. If the abandoned dregs are not handled properly, they will cause great threat to the operation of the new highway as well as to the safety of the surrounding environment and personnel. In this paper, based on a South China highway reconstruction and expansion project, a model of the abandoned dreg body, bridge pile and anti-slide pile is established with the help of finite difference software FLAC3D 5.0. The calculation results show that compared with burying the anti-slide pile, slope cutting is more effective for improving the stability of the abandoned dreg body. Under the action of vertical force intensity, the displacement of the top of the pile increases continuously, and the maximum bending moment of the pile body increases firstly and then decreases. The pile displacement and bending moment of the bridge pile increase significantly in the storm condition compared with the normal condition. In addition, the abandoned dreg body hazard prevention and control technical measures are studied. The impacts of different locations of anti-slide pile burial on bridge piles are analyzed and compared, and it is determined that the optimal location of anti-slide pile burial is the middle of the secondary slope.
- Open Access
- 24 April 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (9) , 3609
Study on the Impact of Different Pile Foundation Construction Methods on Neighboring Oil and Gas Pipelines under Very Small Clearances
With the acceleration of transportation infrastructure and the densification of transportation networks, there has been an increase in bridge pile construction near oil and gas pipelines. Selecting bridge pile construction methods with minimal impact and reducing the adverse effects of bridge pile construction on nearby oil and gas pipelines are of great importance. This paper uses FLAC3D 6.0 software to simulate and analyze the impact of two different pile construction methods, rotary drilling and impact drilling, on adjacent oil pipelines. The results show that the horizontal displacement of oil pipelines during rotary drilling construction is nearly 90% lower than that of the traditional impact drilling method, and the axial stress is reduced by nearly 85%. Furthermore, numerical simulations of rotary drilling under different conditions were conducted to analyze and summarize the patterns of how different conditions affect construction vibration and stress. This study provides a reference for bridge pile construction near oil and gas pipelines or important buildings.
- 24 April 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (9) , 3609
Open AccessStudy on the Impact of Different Pile Foundation Construction Methods on Neighboring Oil and Gas Pipelines under Very Small Clearances
With the acceleration of transportation infrastructure and the densification of transportation networks, there has been an increase in bridge pile construction near oil and gas pipelines. Selecting bridge pile construction methods with minimal impact and reducing the adverse effects of bridge pile construction on nearby oil and gas pipelines are of great importance. This paper uses FLAC3D 6.0 software to simulate and analyze the impact of two different pile construction methods, rotary drilling and impact drilling, on adjacent oil pipelines. The results show that the horizontal displacement of oil pipelines during rotary drilling construction is nearly 90% lower than that of the traditional impact drilling method, and the axial stress is reduced by nearly 85%. Furthermore, numerical simulations of rotary drilling under different conditions were conducted to analyze and summarize the patterns of how different conditions affect construction vibration and stress. This study provides a reference for bridge pile construction near oil and gas pipelines or important buildings.
- Open Access
- 12 February 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (2) , 108
Analysis and Warning Prediction of Tunnel Deformation Based on Multifractal Theory
To better analyze the fluctuation characteristics and development law of tunnel deformation data, multifractal theory is applied to tunnel deformation analysis. That is, the multifractal detrended fluctuation analysis (MF-DFA) model is first utilized to carry out the multifractal characterization of tunnel deformation data. Further, Mann–Kendall (M–K) analysis is utilized to construct the dual criterion (∆α indicator criterion and ∆f(α) indicator criterion) for the tunnel deformation early warning study. In addition, the particle swarm optimization long-short-term memory (PSO-LSTM) prediction model is used for predicting tunnel settlement. The results show that, in reference to the tunnel warning level criteria and based on the Z-value results of the indicator criterion, the warning level of all four sections is class II. At the same time, through the analysis of tunnel settlement predictions, the PSO-LSTM model has a better prediction effect and stability for tunnel settlement. The predicted results show a slow increase in tunnel settlement over the next 5 days. Finally, the tunnel warning level and the predicted results of tunnel settlement are analyzed in a comprehensive manner. The deformation will increase slowly in the future. Therefore, monitoring and measurement should be strengthened, and disaster preparedness plans should be prepared.
- 12 February 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (2) , 108
Open AccessAnalysis and Warning Prediction of Tunnel Deformation Based on Multifractal Theory
To better analyze the fluctuation characteristics and development law of tunnel deformation data, multifractal theory is applied to tunnel deformation analysis. That is, the multifractal detrended fluctuation analysis (MF-DFA) model is first utilized to carry out the multifractal characterization of tunnel deformation data. Further, Mann–Kendall (M–K) analysis is utilized to construct the dual criterion (∆α indicator criterion and ∆f(α) indicator criterion) for the tunnel deformation early warning study. In addition, the particle swarm optimization long-short-term memory (PSO-LSTM) prediction model is used for predicting tunnel settlement. The results show that, in reference to the tunnel warning level criteria and based on the Z-value results of the indicator criterion, the warning level of all four sections is class II. At the same time, through the analysis of tunnel settlement predictions, the PSO-LSTM model has a better prediction effect and stability for tunnel settlement. The predicted results show a slow increase in tunnel settlement over the next 5 days. Finally, the tunnel warning level and the predicted results of tunnel settlement are analyzed in a comprehensive manner. The deformation will increase slowly in the future. Therefore, monitoring and measurement should be strengthened, and disaster preparedness plans should be prepared.
- 23 December 2023
- Published by Elsevier in Computers & Geosciences
- Vol. 183, 105512
A hybrid method of combination probability and machine learning for Chinese geological text segmentation
- 23 December 2023
- Published by Elsevier in Computers & Geosciences
- Vol. 183, 105512
A hybrid method of combination probability and machine learning for Chinese geological text segmentation
- Open Access
- 27 November 2023
- Published by MDPI AG in Fractal and Fractional
- Vol. 7 (12) , 842
Multifractal Characteristics of Smooth Blasting Overbreak in Extra-Long Hard Rock Tunnel
With the development of infrastructure construction in mountainous areas, the number of new extra-long tunnels is increasing. However, these tunnels often face the challenge of complex and variable surrounding rock grades, resulting in a large number of overbreak and underbreak due to the untimely adjustment of smooth blasting parameters. This study focuses on the optimization of the peripheral hole charging structure and blasting parameters for extra-long hard rock tunnels, aiming to improve the effectiveness of smooth blasting technology. The results of this study demonstrate a significant improvement in the effect of smooth blasting after implementing bidirectional polymerization blasting in the tunnel. A comparison between the bidirectional shaped charge and spaced decoupled charge blasting reveals that the former yields better results. To obtain accurate data on the tunnel section profile during excavation, a laser cross-section meter is used for measurement. Furthermore, this study quantitatively compares the optimization effect of smooth blasting parameters. The multifractal characteristics of the tunnel profile overbreak point sequences are analyzed under different smooth blasting schemes using the multifractal detrended fluctuation analysis (MF-DFA) method. It is found that both the spaced decoupled charge and the bidirectional shaped charge blasting exhibit multifractal features in the overbreak measurement point sequences. The calculation results of the multifractal features of the tunnel profile under different smooth blasting plans are in line with the actual situation.
- 27 November 2023
- Published by MDPI AG in Fractal and Fractional
- Vol. 7 (12) , 842
Open AccessMultifractal Characteristics of Smooth Blasting Overbreak in Extra-Long Hard Rock Tunnel
With the development of infrastructure construction in mountainous areas, the number of new extra-long tunnels is increasing. However, these tunnels often face the challenge of complex and variable surrounding rock grades, resulting in a large number of overbreak and underbreak due to the untimely adjustment of smooth blasting parameters. This study focuses on the optimization of the peripheral hole charging structure and blasting parameters for extra-long hard rock tunnels, aiming to improve the effectiveness of smooth blasting technology. The results of this study demonstrate a significant improvement in the effect of smooth blasting after implementing bidirectional polymerization blasting in the tunnel. A comparison between the bidirectional shaped charge and spaced decoupled charge blasting reveals that the former yields better results. To obtain accurate data on the tunnel section profile during excavation, a laser cross-section meter is used for measurement. Furthermore, this study quantitatively compares the optimization effect of smooth blasting parameters. The multifractal characteristics of the tunnel profile overbreak point sequences are analyzed under different smooth blasting schemes using the multifractal detrended fluctuation analysis (MF-DFA) method. It is found that both the spaced decoupled charge and the bidirectional shaped charge blasting exhibit multifractal features in the overbreak measurement point sequences. The calculation results of the multifractal features of the tunnel profile under different smooth blasting plans are in line with the actual situation.