SHSajjad Hadavi

Sajjad Hadavi

*This is an algorithmically generated author record based on publicly available information.

Sajjad Hadavi has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantifying Stability in Inverter-Based Weak Grids in the Presence of Synchronous Condensers

    by Sajjad Hadavi, Nabil Mohammed, Ali Mehrizi-Sani, Behrooz Bahrani

    The high penetration of renewable energy resources, integrated via power electronic inverters, into weak and low-inertia grids has led to the emergence of new challenges within power systems. The absence of native inertia in inverter-based resources (IBRs), in contrast to fossil-fuel-based generators, can result in sustained oscillations and instability. Synchronous Condensers (SynCons) are being considered as a reborn technology to address the challenges associated with system strengthening and inertia support in IBR-dominant power systems. Despite the well-established nature of SynCons, an additional assessment is necessary to analyze the stability of a weak grid with a high penetration of renewable resources, particularly in the presence of SynCons. This paper proposes a quantitative index for the stability analysis of a system incorporating black-boxed IBRs and SynCons. The proposed index is derived from impedance-based stability analysis. The impact of a SynCon on the proposed stability index is evaluated in a single-machine infinite-bus system, and its accuracy is further verified in an IEEE 39-bus system. Additionally, the findings are corroborated through time-domain simulation tests conducted in PSCAD/EMTDC software.


  • Open Access

    Quantifying Stability in Inverter-based Weak Grids in the Presence of Synchronous Condensers

    by Sajjad Hadavi, Ali Mehrizi-Sani, Behrooz Bahrani

    The high penetration of renewable energy resources integrated via power electronic inverters in weak and low-inertia grids is introducing new challenges to power systems. Inverter-based resources (IBRs) do not have native inertia similar to fossil-fuel-based generators and can cause sustained oscillations and instability. Synchronous Condensers (SynCons) are considered as a reborn technology to provide a solution for system strengthening and inertia supporting in IBR-dominant power systems. Although SynCons are a well-known technology, additional assessment for analyzing the stability of a weak grid with a high penetration of renewable resources in the presence of SynCons is required. This paper proposes a quantitative index for the stability analysis of a system, which includes black-boxed IBRs and SynCon. The proposed index is stemmed from impedance-based stability analysis. In this paper, the impact of a SynCon on the proposed stability index is evaluated in a single-machine infinite-bus system, and its accuracy is also verified in an IEEE 39-bus system. Additionally, the findings are verified using time-domain simulation tests in PSCAD/EMTDC software.


  • A Planning Method for Synchronous Condensers in Weak Grids Using Semi-Definite Optimization

    by Sajjad Hadavi, James Saunderson, Ali Mehrizi-Sani, Behrooz Bahrani

    Synchronous Condensers (SynCons) offer voltage regulation, inertia, and fault current contribution to solve the challenges of voltage and frequency instability introduced by the high penetration of renewable energy resources (RERs). However, the cost of installation and operation of a SynCon is noticeable. Furthermore, the SynCons installation can take more than a year, which means the number, size, and placement of the SynCons must be selected optimally. This paper proposes a method to formulate the optimal sizing and allocation of the SynCons via mixed-integer convex optimization. The optimization procedure aims to minimize the cost of SynCons installation, maintenance, and operation while maintaining a certain Short Circuit Ratio (SCR) at points of connection (PoCs). To ensure the SCR at the PoCs is greater than a certain threshold, the SCRs are formulated as constraints in the proposed optimization procedure. The modified IEEE 39-bus system is used to evaluate the proposed optimization method. The performance of the system with optimal SynCons is verified by electromagnetic transient time-domain simulation using PSCAD/EMTDC software.


  • A Robust Exciter Controller Design for Synchronous Condensers in Weak Grids

    by Sajjad Hadavi, Dayan B. Rathnayake, Gamini Jayasinghe, Ali Mehrizi-Sani, Behrooz Bahrani

    Weak grid scenarios and low-inertia systems are emerging issues in power systems, which could lead to voltage and frequency instabilities. Synchronous Condensers (SynCons) have recently drawn renewed attention as a promising solution to provide system strength and inertia support. Even though the exciter control of SynCons is a well-established technology, further developments are required to guarantee the stability of post-fault operations, in particular, in weak grids. This paper proposes a data-driven approach for designing higher-order optimized exciter controllers to meet this requirement. A pseudo-random binary sequence (PRBS)-based system identification method is used to obtain frequency response data of the power system, from the exciter point of view, which is then fed into the proposed optimal control design procedure. The proposed exciter controller is tested for voltage ride-through and fault scenarios in a single machine infinite bus (SMIB) case and the IEEE 39-bus test system to assess its performance compared to the conventional AC1A exciter controller. The results obtained through simulation tests carried out using the PSCAD/EMTDC software verify that the proposed exciter controller guarantees the post-fault stability in both strong and weak grids.


  • Top Cited Papers
    Open Access

    Grid Forming Inverter Modeling, Control, and Applications

    by Dayan B. Rathnayake, Milad Akrami, Chitaranjan Phurailatpam, Si Phu Me, Sajjad Hadavi, Gamini Jayasinghe, Sasan Zabihi, Behrooz Bahrani

    This paper surveys current literature on modeling methods, control techniques, protection schemes, applications, and real-world implementations pertaining to grid forming inverters (GFMIs). Electric power systems are increasingly being augmented with inverter-based resources (IBRs). While having a growing share of IBRs, conventional synchronous generator-based voltage and frequency control mechanisms are still prevalent in the power industry. Therefore, IBRs are experiencing a growing demand for mimicking the behavior of synchronous generators, which is not possible with conventional grid following inverters (GFLIs). As a solution, the concept of GFMIs is currently emerging, which is drawing increased attention from academia and the industry. This paper presents a comprehensive review of GFMIs covering recent advancements in control technologies, fault ride-through capabilities, stability enhancement measures, and practical implementations. Moreover, the challenges in adding GFMIs into existing power systems, including a seamless transition from grid-connected mode to the standalone mode and vice versa, are also discussed in detail. Recently commissioned projects in Australia, the UK, and the US are taken as examples to highlight the trend in the power industry in adding GFMIs to address issues related to weak grid scenarios. Research directions in terms of voltage control, frequency control, system strength improvement, and regulatory framework are also discussed. This paper serves as a resource for researchers and power system engineers exploring solutions to the emerging problems with high penetration of IBRs, focusing on GFMIs.


  • Optimal Allocation and Sizing of Synchronous Condensers in Weak Grids With Increased Penetration of Wind and Solar Farms

    by Sajjad Hadavi, Milad Zarif Mansour, Behrooz Bahrani

    The increasing number of weak-grid-connected renewable energy resources in power systems has created various challenges in recent years. Some examples include un-damped voltage oscillations in the ERCOT and sub-synchronous resonance in the North-China power grid. Several solutions for these challenges have been proposed, such as Static Compensators and Synchronous Condensers (SynCons). SynCons, being synchronous machines without a prime mover, provide several benefits in weak power systems, such as frequency support, system strength, and voltage regulation. Although SynCons are widely-utilized to mitigate the weak grid integration challenges, their installation/operation costs make them a costly solution. Additionally, their lead-time can be more than a year, which means their initial sizing and allocation must be optimal. In this paper, a method for the optimal allocation and sizing of SynCons is proposed. The main objective of this method is maintaining Short Circuit Ratio (SCR) in the system greater than pre-defined values while the investment and operation costs of SynCons, and voltage deviation in the system are minimized. Three meta-heuristic optimization algorithms are used to implement the proposed method, and its performance is evaluated via Electromagnetic Transient (EMT) time-domain simulation in a modified IEEE 39-bus system. The PSCAD/EMTDC software is used for the time-domain simulation. The simulation results confirm that with optimized allocation and sizing, the SCR of the network in all areas is more than pre-defined values, and also, all renewable energy resources can ride through disturbances and comply with given grid codes.