KDKlaus Drechsler

Klaus Drechsler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Klaus Drechsler has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental Analysis of Ultraviolet Radiation Transmission Behavior in Fiber-Reinforced Thermoset Composites During Photopolymerization

    by Ludovico Biavati, Sylvester Vogl, Klaus Drechsler

    As the importance of sustainability and performance increases, new developments in the manufacturing of fiber-reinforced polymer composites (FRPC) are requested. Ultraviolet (UV) curing offers a faster, more economical, and eco-friendlier alternative to conventionally used thermal curing methods, e.g., autoclave curing, but according to extant research, also presents some shortcomings, such as limitations to thin FRPCs and transparent glass fibers (GFs). This study analyses the UV light transmission in different thermoset FRPCs by irradiating various fiber samples on one side, while a sensor on the opposite side measures the transmitted irradiance. The materials investigated include unidirectional (UD) carbon fibers (CF), UD flax fibers (FF), and six GF fabrics with different ply structures. The fiber samples are tested in a dry, non-impregnated state and a resin-impregnated state using a UV-curable vinyl-ester-based resin. The results show that up to 16 plies of five GF fabrics are fully cured within the 20 s irradiation time and still exhibit a relatively high light transmission, revealing the potential of curing thick FRPCs with UV light. Furthermore, up to three plies of non-transparent FFs are cured, which is promising for the UV curing of natural fibers.


  • Open Access

    Manufacturing and Characterisation of a Tungsten Fibre-Reinforced Polymer Composite

    by Daniel Dickes, Stephan Maidl, Johann Riesch, Rudolf Neu, Klaus Drechsler

    Using metal fibres in fibre-reinforced polymers is a way to tailor not only the mechanical properties but also material properties like, e.g., electrical and thermal conductivity or toughness. While recent works focus on ductile steel fibres, this work demonstrates the manufacturability of tungsten fibre-reinforced polymers. The Vacuum Assisted Process works well to quasi-unidirectionally reinforce an epoxy matrix with tungsten fibres of 150 µm diameter, achieving a fibre volume content of 23 ± 1% (±standard deviation). Tensile tests of 10 mm-wide tungsten fibre-reinforced polymer specimens yield a Young’s modulus of 89 ± 5 GPa, an ultimate tensile strength of 615 ± 33 MPa, and a failure strain of 1.9 ± 0.2%. The fractured specimens are further investigated, revealing that 66% of the tungsten fibres fail in a dominantly ductile manner with a strongly localised region of plastic deformation. This is a unique feature of tungsten fibres with the potential to enhance the fracture toughness of fibre-reinforced polymers.

  • Open Access

    Development and Application of a Cooling Rate Dependent PVT Model for Injection Molding Simulation of Semi Crystalline Thermoplastics

    by Thomas Willerer, Thomas Brinkmann, Klaus Drechsler

    This technical paper delves into the creation and application of an enhanced mathematical model for semi crystalline thermoplastics based on the Pressure-Volume-Temperature (PVT) Two Domain Tait Equation. The model is designed to incorporate the impact of the cooling rate on the specific volume of the material. This is achieved by utilizing Flash differential scanning calorimetry (fDSC) measurements, thereby ensuring a direct correlation to the actual behavior of the material in reality. The practical application of the model in the context of injection molding simulation was also considered. This was done by integrating the mathematical model into the Moldflow software via the Solver API. The paper underscores the discontinuity issue inherent in the traditional Tait equation with cooling rates and proposes a solution that guarantees a correct transition from the liquid to the solid phase, even at high cooling rates and pressures. The results demonstrated a realistic PVT curve across a wide range of cooling rates and high pressures. The model was put to the test using a 3D tetrahedron meshed calculation model in the injection molding simulation. This study marks a significant step forward in the simulation of injection molding processes, as it successfully bridges the gap between real material properties and simplified simulation, paving the way for more accurate and efficient simulations in the future.


  • Open Access

    Investigation of the Interfacial Fusion Bonding on Hybrid Additively Manufactured Components under Torsional Load

    by Melike Kizak, Anna von Bartschikowski, Anna Trauth, Christian Heigl, Klaus Drechsler

    Hybrid manufacturing processes integrate multiple manufacturing techniques to leverage their respective advantages and mitigate their limitations. This study combines additive manufacturing and injection molding, aiming to efficiently produce components with extensive design flexibility and functional integration. The research explores the interfacial fusion bonding of hybrid additively manufactured components under torsional loading. Specifically, it examines the impact of various surface treatments on injection molded parts and the influence of different build chamber temperatures during additive manufacturing on torsional strength. Polycarbonate components, neat, with glass or carbon fiber-reinforcement, are produced and assessed for dimensional accuracy, torsional strength, and fracture behavior. The findings emphasize the critical role of surface treatment for the injection molded components before additive manufacturing. Additionally, the study identifies the influence of chamber temperatures on both dimensional accuracy and torsional strength. Among all investigated materials, plasma-treated neat samples exhibited the best torsional strength. The torsional strength was increased by up to 87% by actively heating the build chamber to 186 °C for neat polycarbonate. These insights aim to advance the quality and performance of hybrid additively manufactured components, broadening their application potential across diverse fields.


  • Relevante Werkstoffe und Werkstofftechniken im Fahrzeugbau

    by Manuel Otto, Horst E. Friedrich, Dan Dragulin, David Klaumünzer, Ashley Stone, Oliver Schauerte, Josef R. Wünsch, Klaus Drechsler, Sebastian Strauß, Jürgen Becker, et al.

  • Open Access

    Influence of Extrusion Parameters on the Mechanical Properties of Slow Crystallizing Carbon Fiber-Reinforced PAEK in Large Format Additive Manufacturing

    by Patrick Consul, Matthias Feuchtgruber, Bernhard Bauer, Klaus Drechsler

    Additive Manufacturing (AM) enables the automated production of complex geometries with low waste and lead time, notably through Material Extrusion (MEX). This study explores Large Format Additive Manufacturing (LFAM) with carbon fiber-reinforced polyaryletherketones (PAEK), particularly a slow crystallizing grade by Victrex. The research investigates how extrusion parameters affect the mechanical properties of the printed parts. Key parameters include line width, layer height, layer time, and extrusion temperature, analyzed through a series of controlled experiments. Thermal history during printing, including cooling rates and substrate temperatures, was monitored using thermocouples and infrared cameras. The crystallization behavior of PAEK was replicated in a Differential Scanning Calorimetry (DSC) setup. Mechanical properties were evaluated using three-point bending tests to analyze the impact of thermal conditions at the deposition interface on interlayer bonding and overall part strength. The study suggests aggregated metrics, enthalpy deposition rate and shear rate under the nozzle, that should be maximized to enhance mechanical performance. The findings show that the common practice of setting fixed layer times falls short of ensuring repeatable part quality.


  • Open Access

    Quantification of the Influence of Charge Variations on the Flow Behavior of Sheet Molding Compounds

    by Anna Julia Imbsweiler, Junyan Wang, Reem Sharwalla, Julius Hoffelner, David Colin, Swen Zaremba, Klaus Drechsler

    Using a newly developed flow test bench, several charge configurations were analyzed to quantify the influence of the charge configuration in the mold in sheet molding compound (SMC) manufacturing. A test bench was developed to satisfy the industrial needs for the incoming goods inspection as well as the need for the flow characterization of rheological models in the simulation. The test setup has a cylindrical opening for the charge placement, from where the material is pressed into a thin flow channel, forcing the material to reorient. A comparison was performed by juxtaposing the resulting compression pressure recorded during the process. The charge for this test series, placed into the cylindrical opening, has two basal configurations, one consisting of a stack of disks, and the second in a rectangular sheet rolled up into a spiral. Six charge variations were tested in total. The amount of material, the batch, the layering and the production direction of the sheet proved to have a significant influence on the necessary compression pressure. Guidelines about the recommended charge configurations could be derived for optimized production settings, such as a reduction in the compression pressure and modifications to the charge.


  • Open Access

    Bringing Light into the Dark—Overview of Environmental Impacts of Carbon Fiber Production and Potential Levers for Reduction

    by Tobias Manuel Prenzel, Andrea Hohmann, Tim Prescher, Kerstin Angerer, Daniel Wehner, Robert Ilg, Tjark von Reden, Klaus Drechsler, Stefan Albrecht

    Carbon fibers (CFs) are a crucial material for lightweight structures with advanced mechanical performance. However, there is still a paucity of detailed understanding regarding the environmental impacts of production. Previously, mostly singled-out scenarios for CF production have been assessed, often based on scarce transparent inventory data. To expand the current knowledge and create a robust database for future evaluation, a life cycle assessment (LCA) was carried out. To this end, a detailed industry-approved LCI is published, which also proved plausible against the literature. Subsequently, based on a global scenario representing the market averages for precursor and CF production, the most relevant contributors to climate change (EF3.1 climate change, total) and the depletion of fossil energy carriers (EF3.1 resource use, fossil) were identified. The energy consumption in CF manufacturing was found to be responsible for 59% of the climate change and 48% of the fossil resource use. To enable a differentiated discussion of manufacturing locations and process energy consumption, 24 distinct scenarios were assessed. The findings demonstrate the significant dependence of the results on the scenarios’ boundary conditions: climate change ranges from 13.0 to 34.1 kg CO2 eq./kg CF and resource use from 262.3 to 497.9 MJ/kg CF. Through the investigated scenarios, the relevant reduction potentials were identified. The presented results help close an existing data gap for high-quality, regionalized, and technology-specific LCA results for the production of CF.


  • Open Access

    Tailored elastic properties of beam-based lattice unit structures

    by Oliver Schwahofer, Sascha Büttner, David Colin, Klaus Drechsler

    In this paper a structural optimization framework is developed to design three-dimensional periodic lattice unit cells that meets specific mechanical requirements. The work is motivated by the high design freedom of additive manufacturing technologies, which enable complex multiscale lattice structures to be printed. An optimized lattice unit cell delivers desired orthotropic elastic material properties, providing a tailored metamaterial. The design variables are the coordinates of lattice skeleton nodes defined within the three-dimensional lattice cell space, and the connectivities between them resulting a strut-skeleton. Genetic algorithm (GA) is combined with posterior particle swarm optimization (PSO) algorithm to establish an integrated topology and shape optimization tool. For the calculation of the elastic properties of the individual lattice cells, an effective Timoshenko beam-based finite element calculation method was developed. The novelty of the work stems from its free topology optimization nature, excluding the strut diameters from the optimization variables. The method is demonstrated by four lattice cell optimization cases, where extreme orthotropic elastic properties were targeted and achieved. The tailored lattice cells represent a metamaterial, that can be used to build a structural component on the macroscopic scale, by stacking the cells periodically together, to fill the macroscopic 3D design space. This framework is a strong basis that can be extended to meet further nonlinear metamaterial requirements, such as energy absorption.


  • Open Access

    An Edge-Filtered Optical Fiber Interrogator for Thermoplastic Polymer Analysis

    by Vincent Backmann, Felix Dorner, Klaus Drechsler

    The present paper deals with the determination of thermodynamic quantities of thermoplastic polymers by using an optical fiber interrogator. Typically, laboratory methods such as differential scanning calorimetry (DSC) or thermomechanical analysis (TMA) are a reliable state-of-the-art option for thermal polymer analysis. The related laboratory commodities for such methods are of high cost and are impractical for field applications. In this work, an edge-filter-based optical fiber interrogator, which was originally developed to detect the reflection spectrum of fiber Bragg grating sensors, is utilized for the detection of the boundary reflection intensities of the cleaved end of a standard telecommunication optical fiber (SMF28e). By means of the Fresnel equations, the temperature-dependent refractive index of thermoplastic polymer materials is measured. Demonstrated with the amorphous thermoplastic polymers polyetherimide (PEI) and polyethersulfone (PES), an alternative to DSC and TMA is presented as the glass transition temperatures and coefficients of thermal expansion are derived. A DSC alternative in the semi-crystalline polymer analysis with the absence of a crystal structure is shown as the melting temperature and cooling-rate-dependent crystallization temperatures of polyether ether ketone (PEEK) are detected. The proposed method shows that thermal thermoplastic analysis can be performed with a flexible, low-cost and multipurpose device.