Fangyan Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Fangyan Li has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Ye Zhang
National Laboratory of Solid State Microstructures Jiangsu Key Laboratory of Artificial Functional Materials Chemistry and Biomedicine Innovation Centre Collaborative Innovation Centre of Advanced Microstructures College of Engineering and Applied Sciences Nanjing University Nanjing 210023 China
8 shared publications - Er He
National Laboratory of Solid State Microstructures Jiangsu Key Laboratory of Artificial Functional Materials Chemistry and Biomedicine Innovation Center (ChemBIC), Collaborative Innovation Center of Advanced Microstructures College of Engineering and Applied Sciences Nanjing University Nanjing 210023 China
7 shared publications - Jiacheng Wang
National Laboratory of Solid State Microstructures Jiangsu Key Laboratory of Artificial Functional Materials Chemistry and Biomedicine Innovation Centre Collaborative Innovation Centre of Advanced Microstructures College of Engineering and Applied Sciences Nanjing University Nanjing China
7 shared publications - Tingting Ye
National Laboratory of Solid State Microstructures Jiangsu Key Laboratory of Artificial Functional Materials Chemistry and Biomedicine Innovation Center (ChemBIC) Collaborative Innovation Center of Advanced Microstructures College of Engineering and Applied Sciences Nanjing University Nanjing 210023 China
6 shared publications - Yiding Jiao
National Laboratory of Solid State Microstructures Jiangsu Key Laboratory of Artificial Functional Materials Chemistry and Biomedicine Innovation Centre Collaborative Innovation Centre of Advanced Microstructures College of Engineering and Applied Sciences Nanjing University Nanjing China
6 shared publications - Jiang Lu
National Laboratory of Solid State Microstructures Jiangsu Key Laboratory of Artificial Functional Materials Chemistry and Biomedicine Innovation Centre Collaborative Innovation Centre of Advanced Microstructures College of Engineering and Applied Sciences Nanjing University Nanjing 210023 China
5 shared publications
Latest Publications
A New Metalgel Current Collector for Simultaneous Rapid and Stable Zinc Electrochemistry
Achieving both high‐rate capability and long‐term cycling stability in zinc anode remains challenging due to the fundamental trade‐off. Fast kinetics require maximum interfacial area for charge transfer, while stability demands minimal zinc/electrolyte contact to suppress parasitic reactions and dendrite growth. However, in previous studies, zinc deposited at the electrode/electrolyte interface, leading to limited lifetimes (≤ 1200 h at a utilization ratio of ≥ 60%) and high overpotentials (≥ 480 mV at 50 mA·cm −2 ). Here, we design a new metalgel current collector to effectively resolve the above limitation. The metalgel comprises a biphasic gallium–indium–zinc continuum immobilized within a 3D polymer network, establishing both ion and electron conduction pathways that maximize the electrochemically active interface. The biphasic gallium–indium–zinc contains solid metallic zinc dispersed within the liquid gallium–indium–zinc alloy phase, enabling inward zinc deposition/stripping via a reversible dissolution–precipitation alloying process. This inward‐deposition/stripping minimizes zinc/electrolyte contact and suppresses parasitic reactions and dendrite formation, enabling zinc anodes to achieve over 4300 h of stable cycling at 80% zinc utilization ratio and maintain only 156.6 mV overpotential at an ultrahigh current density of 100 mA·cm −2 . By decoupling interfacial kinetics from interfacial instabilities, this work presents a new paradigm for high‐performance metal batteries.
A New Metalgel Current Collector for Simultaneous Rapid and Stable Zinc Electrochemistry
Achieving both high‐rate capability and long‐term cycling stability in zinc anode remains challenging due to the fundamental trade‐off. Fast kinetics require maximum interfacial area for charge transfer, while stability demands minimal zinc/electrolyte contact to suppress parasitic reactions and dendrite growth. However, in previous studies, zinc deposited at the electrode/electrolyte interface, leading to limited lifetimes (≤ 1200 h at a utilization ratio of ≥ 60%) and high overpotentials (≥ 480 mV at 50 mA·cm −2 ). Here, we design a new metalgel current collector to effectively resolve the above limitation. The metalgel comprises a biphasic gallium–indium–zinc continuum immobilized within a 3D polymer network, establishing both ion and electron conduction pathways that maximize the electrochemically active interface. The biphasic gallium–indium–zinc contains solid metallic zinc dispersed within the liquid gallium–indium–zinc alloy phase, enabling inward zinc deposition/stripping via a reversible dissolution–precipitation alloying process. This inward‐deposition/stripping minimizes zinc/electrolyte contact and suppresses parasitic reactions and dendrite formation, enabling zinc anodes to achieve over 4300 h of stable cycling at 80% zinc utilization ratio and maintain only 156.6 mV overpotential at an ultrahigh current density of 100 mA·cm −2 . By decoupling interfacial kinetics from interfacial instabilities, this work presents a new paradigm for high‐performance metal batteries.
- 29 September 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (16)
Anion‐Confined Interface Enabling Uniform Stripping of Magnesium Anode
The non‐uniform stripping behavior of magnesium (Mg) anodes severely limits their utilization ratio and areal capacity, presenting a critical barrier to the practical application of Mg‐based batteries. Herein, an anion‐confined interface on the Mg anode is introduced that facilitates uniform stripping by regulating the migration of interfacial anions. This strategy enables Mg anodes to achieve a record‐high areal capacity of 17.24 mAh·cm −2 with a utilization ratio of 90%. Consequently, an unprecedented ampere‐hour‐scale rechargeable Mg‐ion pouch cell is demonstrated. Furthermore, modified Mg‐air batteries exhibit stable operation with a high average energy density of 2300 Wh·kg −1 , reducing performance deviation from 16.3% to 4.4%. These findings provide mechanistic insights into ion migration control at the Mg interface and offer a robust pathway toward high‐performance Mg‐based batteries.
- 29 September 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (16)
Anion‐Confined Interface Enabling Uniform Stripping of Magnesium Anode
The non‐uniform stripping behavior of magnesium (Mg) anodes severely limits their utilization ratio and areal capacity, presenting a critical barrier to the practical application of Mg‐based batteries. Herein, an anion‐confined interface on the Mg anode is introduced that facilitates uniform stripping by regulating the migration of interfacial anions. This strategy enables Mg anodes to achieve a record‐high areal capacity of 17.24 mAh·cm −2 with a utilization ratio of 90%. Consequently, an unprecedented ampere‐hour‐scale rechargeable Mg‐ion pouch cell is demonstrated. Furthermore, modified Mg‐air batteries exhibit stable operation with a high average energy density of 2300 Wh·kg −1 , reducing performance deviation from 16.3% to 4.4%. These findings provide mechanistic insights into ion migration control at the Mg interface and offer a robust pathway toward high‐performance Mg‐based batteries.
Electrochemical Activation Inducing Rocksalt‐to‐Spinel Transformation for Prolonged Service Life of LiMn 2 O 4 Cathodes
LiMn 2 O 4 spinel is emerging as a promising cathode material for lithium‐ion batteries, largely due to its open framework that facilitates Li + diffusion and excellent rate performance. However, the charge–discharge cycling of the LiMn 2 O 4 cathode leads to severe structural degradation and rapid capacity decay. Here, an electrochemical activation strategy is introduced, employing a facile galvano‐potentiostatic charging operation, to restore the lost capacity of LiMn 2 O 4 cathode without damaging the battery configuration. With an electrochemical activation strategy, the cycle life of the LiMn 2 O 4 cathode is extended from an initial 1500 to an impressive 14 000 cycles at a 5C rate with Li metal as the anode, while increasing the total discharge energy by ten times. Remarkably, the electrochemical activation enhances the diffusion kinetics of Li + , with the diffusion coefficient experiencing a 37.2% increase. Further investigation reveals that this improvement in capacity and diffusion kinetics results from a transformation of the redox‐inert LiMnO 2 rocksalt layer on the surface of degraded cathodes back into active spinel. This transformation is confirmed through electron microscopy and corroborated by density functional theory simulations. Moreover, the viability of this electrochemical activation strategy has been demonstrated in pouch cell configurations with Li metal as the anode, underscoring its potential for broader application.
Electrochemical Activation Inducing Rocksalt‐to‐Spinel Transformation for Prolonged Service Life of LiMn 2 O 4 Cathodes
LiMn 2 O 4 spinel is emerging as a promising cathode material for lithium‐ion batteries, largely due to its open framework that facilitates Li + diffusion and excellent rate performance. However, the charge–discharge cycling of the LiMn 2 O 4 cathode leads to severe structural degradation and rapid capacity decay. Here, an electrochemical activation strategy is introduced, employing a facile galvano‐potentiostatic charging operation, to restore the lost capacity of LiMn 2 O 4 cathode without damaging the battery configuration. With an electrochemical activation strategy, the cycle life of the LiMn 2 O 4 cathode is extended from an initial 1500 to an impressive 14 000 cycles at a 5C rate with Li metal as the anode, while increasing the total discharge energy by ten times. Remarkably, the electrochemical activation enhances the diffusion kinetics of Li + , with the diffusion coefficient experiencing a 37.2% increase. Further investigation reveals that this improvement in capacity and diffusion kinetics results from a transformation of the redox‐inert LiMnO 2 rocksalt layer on the surface of degraded cathodes back into active spinel. This transformation is confirmed through electron microscopy and corroborated by density functional theory simulations. Moreover, the viability of this electrochemical activation strategy has been demonstrated in pouch cell configurations with Li metal as the anode, underscoring its potential for broader application.
- 22 November 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (10)
A Temperature‐Sensing Hydrogel Coating on The Medical Catheter
Medical surgical catheters are widely used in the medical field for drug delivery or postoperative drainage. However, infections associated with local temperature rise often occur at the catheter‐tissue interface, resulting in irreversible pathological damage, cognitive behavioral abnormalities, or even an increased risk of mortality if not monitored in time. Herein, an in situ temperature‐sensing hydrogel coating on the outer surface of medical surgical catheters for real‐time infection monitoring is developed. The hydrogel coating exhibits a record temperature coefficient of resistance of 2.90% °C−1 and maintains stable in vivo. Besides, the hydrogel layer forms a mechanically compatible catheter‐tissue interface and minimizes the risk of inflammatory responses due to its tissue‐like softness (Young's modulus of 4.24 kPa). By applying it in the early detection of infections in the brain of SD rats, the individual survival rate has increased to 90% with timely intervention.
- 22 November 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (10)
A Temperature‐Sensing Hydrogel Coating on The Medical Catheter
Medical surgical catheters are widely used in the medical field for drug delivery or postoperative drainage. However, infections associated with local temperature rise often occur at the catheter‐tissue interface, resulting in irreversible pathological damage, cognitive behavioral abnormalities, or even an increased risk of mortality if not monitored in time. Herein, an in situ temperature‐sensing hydrogel coating on the outer surface of medical surgical catheters for real‐time infection monitoring is developed. The hydrogel coating exhibits a record temperature coefficient of resistance of 2.90% °C−1 and maintains stable in vivo. Besides, the hydrogel layer forms a mechanically compatible catheter‐tissue interface and minimizes the risk of inflammatory responses due to its tissue‐like softness (Young's modulus of 4.24 kPa). By applying it in the early detection of infections in the brain of SD rats, the individual survival rate has increased to 90% with timely intervention.
- 10 October 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (45) , e2304141
A Mitochondrion‐Inspired Magnesium–Oxygen Biobattery with High Energy Density In Vivo
Implantable batteries are urgently needed as a power source to meet the demands of the next generation of biomedical electronic devices. However, existing implantable batteries suffer from unsatisfactory energy density, hindering the miniaturization of these devices. Here, a mitochondrion‐inspired magnesium–oxygen biobattery that achieves both high energy density and biocompatibility in vivo is reported. The resulting biobattery exhibits a recorded energy density of 2517 Wh L–1/1491 Wh kg–1 based on the total volume/mass of the device in vivo, which is ≈2.5 times higher than the current state‐of‐the‐art, and can adapt to different environments for stable discharges. The volume of the magnesium–oxygen biobattery can be as thin as 0.015 mm3 and can be scaled up to 400 times larger without reducing the energy density. Additionally, it shows a stable biobattery/tissue interface, significantly reducing foreign body reactions. This work presents an effective strategy for the development of high‐performance implantable batteries.
- 10 October 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (45) , e2304141
A Mitochondrion‐Inspired Magnesium–Oxygen Biobattery with High Energy Density In Vivo
Implantable batteries are urgently needed as a power source to meet the demands of the next generation of biomedical electronic devices. However, existing implantable batteries suffer from unsatisfactory energy density, hindering the miniaturization of these devices. Here, a mitochondrion‐inspired magnesium–oxygen biobattery that achieves both high energy density and biocompatibility in vivo is reported. The resulting biobattery exhibits a recorded energy density of 2517 Wh L–1/1491 Wh kg–1 based on the total volume/mass of the device in vivo, which is ≈2.5 times higher than the current state‐of‐the‐art, and can adapt to different environments for stable discharges. The volume of the magnesium–oxygen biobattery can be as thin as 0.015 mm3 and can be scaled up to 400 times larger without reducing the energy density. Additionally, it shows a stable biobattery/tissue interface, significantly reducing foreign body reactions. This work presents an effective strategy for the development of high‐performance implantable batteries.
- 28 August 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (24)
High‐Performance Neutral Zinc‐Air Batteries Based on Hybrid Zinc/Carbon Nanotube Fiber Anodes
Neutral zinc‐air batteries are considered potential wearable energy storage devices due to their high theoretical energy density, superior safety, and low cost. However, the current performance of neutral zinc‐air batteries is severely influenced by the zinc anodes. The pure zinc anode can be comminuted during charge and discharge cycles due to its unstable electrode structure, resulting in the failure of electrical contact. As a result, the battery exhibits low capacity and short cycle life. In addition, the pure zinc anodes show slow reaction kinetics in neutral electrolytes, which causes the battery to perform low power density and poor energy efficiency. Besides, pure zinc anodes own high bending stiffness, which cannot meet the demands for powering flexible electronics. Herein, a new kind of hybrid zinc/carbon nanotube fiber anode with a stable electrode structure, high reaction activity, as well as high flexibility is proposed to produce high‐performance neutral zinc‐air batteries. The fabricated fiber battery showed a high specific capacity and maximum power density of 645.3 mAh g−1 and 615.8 mW g−1, respectively. Furthermore, a high energy efficiency of 71% is achieved, the highest among the reported neutral zinc‐air batteries. The entire fiber battery is highly flexible, highlighting its potential for wearable energy storage applications.
- 28 August 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (24)
High‐Performance Neutral Zinc‐Air Batteries Based on Hybrid Zinc/Carbon Nanotube Fiber Anodes
Neutral zinc‐air batteries are considered potential wearable energy storage devices due to their high theoretical energy density, superior safety, and low cost. However, the current performance of neutral zinc‐air batteries is severely influenced by the zinc anodes. The pure zinc anode can be comminuted during charge and discharge cycles due to its unstable electrode structure, resulting in the failure of electrical contact. As a result, the battery exhibits low capacity and short cycle life. In addition, the pure zinc anodes show slow reaction kinetics in neutral electrolytes, which causes the battery to perform low power density and poor energy efficiency. Besides, pure zinc anodes own high bending stiffness, which cannot meet the demands for powering flexible electronics. Herein, a new kind of hybrid zinc/carbon nanotube fiber anode with a stable electrode structure, high reaction activity, as well as high flexibility is proposed to produce high‐performance neutral zinc‐air batteries. The fabricated fiber battery showed a high specific capacity and maximum power density of 645.3 mAh g−1 and 615.8 mW g−1, respectively. Furthermore, a high energy efficiency of 71% is achieved, the highest among the reported neutral zinc‐air batteries. The entire fiber battery is highly flexible, highlighting its potential for wearable energy storage applications.
- 29 October 2021
- Published by Wiley in Advanced Materials
- Vol. 34 (4) , 2105120
A Tissue‐Like Soft All‐Hydrogel Battery
To develop wearable and implantable bioelectronics accommodating the dynamic and uneven biological tissues and reducing undesired immune responses, it is critical to adopt batteries with matched mechanical properties with tissues as power sources. However, the batteries available cannot reach the softness of tissues due to the high Young's moduli of components (e.g., metals, carbon materials, conductive polymers, or composite materials). The fabrication of tissue‐like soft batteries thus remains a challenge. Here, the first ultrasoft batteries totally based on hydrogels are reported. The ultrasoft batteries exhibit Young's moduli of 80 kPa, perfectly matching skin and organs (e.g., heart). The high specific capacities of 82 mAh g−1 in all‐hydrogel lithium‐ion batteries and 370 mAh g−1 in all‐hydrogel zinc‐ion batteries at a current density of 0.5 A g−1 are achieved. Both high stability and biocompatibility of the all‐hydrogel batteries have been demonstrated upon the applications of wearable and implantable. This work illuminates a pathway for designing power sources for wearable and implantable electronics with matched mechanical properties.
- 29 October 2021
- Published by Wiley in Advanced Materials
- Vol. 34 (4) , 2105120
A Tissue‐Like Soft All‐Hydrogel Battery
To develop wearable and implantable bioelectronics accommodating the dynamic and uneven biological tissues and reducing undesired immune responses, it is critical to adopt batteries with matched mechanical properties with tissues as power sources. However, the batteries available cannot reach the softness of tissues due to the high Young's moduli of components (e.g., metals, carbon materials, conductive polymers, or composite materials). The fabrication of tissue‐like soft batteries thus remains a challenge. Here, the first ultrasoft batteries totally based on hydrogels are reported. The ultrasoft batteries exhibit Young's moduli of 80 kPa, perfectly matching skin and organs (e.g., heart). The high specific capacities of 82 mAh g−1 in all‐hydrogel lithium‐ion batteries and 370 mAh g−1 in all‐hydrogel zinc‐ion batteries at a current density of 0.5 A g−1 are achieved. Both high stability and biocompatibility of the all‐hydrogel batteries have been demonstrated upon the applications of wearable and implantable. This work illuminates a pathway for designing power sources for wearable and implantable electronics with matched mechanical properties.
- 5 September 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (49) , 2107652
Engineering Polymer Glue towards 90% Zinc Utilization for 1000 Hours to Make High‐Performance Zn‐Ion Batteries
Zinc (Zn) metal is considered the promising anode for “post‐lithium” energy storage due to its high volumetric capacity, low redox potential, abundant reserve, and low cost. However, extravagant Zn is required in present Zn batteries, featuring low Zn utilization rate and device‐scale energy/power densities far below theoretical values. The limited reversibility of Zn metal is attributed to the spontaneous parasitic reactions of Zn with aqueous electrolytes, that is, corrosion with water, passive by‐product formation, and dendrite growth. Here, a new ion‐selective polymer glue coated on Zn anode is designed, isolating the Zn anode from the electrolyte by blocking water diffusion while allowing rapid Zn2+ ion migration and facilitating uniform electrodeposition. Hence, a record‐high Zn utilization of 90% is realized for 1000 h at high current densities, in sharp contrast to much poorer cyclability (usually < 200 h) at lower Zn utilization (50–85%) reported to date. When matched with the vanadium‐based cathode, the resulting Zn‐ion battery exhibited an ultrahigh device‐scale energy density of 228 Wh kg−1, comparable to commercial lithium‐ion batteries.
- 5 September 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (49) , 2107652
Engineering Polymer Glue towards 90% Zinc Utilization for 1000 Hours to Make High‐Performance Zn‐Ion Batteries
Zinc (Zn) metal is considered the promising anode for “post‐lithium” energy storage due to its high volumetric capacity, low redox potential, abundant reserve, and low cost. However, extravagant Zn is required in present Zn batteries, featuring low Zn utilization rate and device‐scale energy/power densities far below theoretical values. The limited reversibility of Zn metal is attributed to the spontaneous parasitic reactions of Zn with aqueous electrolytes, that is, corrosion with water, passive by‐product formation, and dendrite growth. Here, a new ion‐selective polymer glue coated on Zn anode is designed, isolating the Zn anode from the electrolyte by blocking water diffusion while allowing rapid Zn2+ ion migration and facilitating uniform electrodeposition. Hence, a record‐high Zn utilization of 90% is realized for 1000 h at high current densities, in sharp contrast to much poorer cyclability (usually < 200 h) at lower Zn utilization (50–85%) reported to date. When matched with the vanadium‐based cathode, the resulting Zn‐ion battery exhibited an ultrahigh device‐scale energy density of 228 Wh kg−1, comparable to commercial lithium‐ion batteries.
- 1 December 2016
- Published by Elsevier in Microelectronics Journal
- Vol. 58, 60-69
Wireless RF systems modelling using SystemC
- 1 December 2016
- Published by Elsevier in Microelectronics Journal
- Vol. 58, 60-69
Wireless RF systems modelling using SystemC
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 33-36
Bluetooth transceiver modeling using SystemC-AMS
This paper presents the high-level modeling and simulation of a GFSK RF transceiver for a Bluetooth Low Energy (BLE) system. This model, written in SystemC-AMS (SCAMS) permits a simple integration within the existing system digital environment written in SystemC-TLM, which enables a global system simulation to obtain the system performance (e.g. Bit-Error-Rate (BER) or Packet- Error-Rate (PER)) related to the power and energy consumption.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 33-36
Bluetooth transceiver modeling using SystemC-AMS
This paper presents the high-level modeling and simulation of a GFSK RF transceiver for a Bluetooth Low Energy (BLE) system. This model, written in SystemC-AMS (SCAMS) permits a simple integration within the existing system digital environment written in SystemC-TLM, which enables a global system simulation to obtain the system performance (e.g. Bit-Error-Rate (BER) or Packet- Error-Rate (PER)) related to the power and energy consumption.