Advancing Aluminum Casting Optimization With Real-Time Temperature and Gap Measurements Using Optical Fiber Sensors at the Metal-Mold Interface
Authors:
- Bohong ZhangBohong Zhang
- Abhishek Prakash HungundAHAbhishek Prakash Hungund
- Dinesh Reddy AllaDADinesh Reddy Alla
- Deva Prasaad NeelakandanDNDeva Prasaad Neelakandan
- Muhammad RomanMRMuhammad Roman
- Ronald J. O’mAlleyRORonald J. O’mAlley
- Laura BartlettLBLaura Bartlett
- Rex E. GeraldRGRex E. Gerald
- Jie HuangJie Huang
Open Access
- 1 November 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Abstract
Accurate measurement of interfacial heat transfer during casting solidification is crucial for optimizing metal solidification processes. The gap between the mold wall and casting surface plays a significant role in heat transfer and cooling rates. In this study, two innovative fiber-optic sensors are employed to measure real-time mold gaps and thermal profiles during the solidification of A356 aluminum in a permanent mold casting. The experimental setup consists of a specially designed mold system made of unheated, uncoated tool steel, which facilitates easy installation of the fiber-optic sensors. An Extrinsic Fabry-Perot interferometric (EFPI) sensor is utilized to monitor the evolving gap between the mold wall and casting surface. This method relies on the unique concept of using molten metal as the second reflection interface for gap measurements. The EFPI gap measurements exhibit high accuracy and precision, with a maximum error of only 2 μm when compared to physical measurements. Simultaneously, a stainless steel-encased fiber utilizing the Rayleigh backscattering (RBS) technique is deployed across the mold wall and cavity to achieve real-time temperature measurements with a spatial resolution of 0.65 mm. The study demonstrates that leveraging high-resolution temperature profiles and gap evolution measurements enhances understanding of heat transfer dynamics at the mold-metal interface, particularly valuable for complex-shaped castings and continuously cast metals. Additionally, the ability to measure the cast shape exiting a continuous casting mold during operation presents a novel tool for real-time product quality monitoring and process safety enhancement by detecting conditions that may lead to slab cracking and breakouts.Keywords
Funding Information
- Defense Logistics Agency (DLA)-Troop Support, Philadelphia, PA, USA
- Defense Logistics Agency Information Operations, J68, Research and Development, Ft. Belvoir, VA, USA
- U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) under the Advanced Manufacturing Office (DE-EE0009119)
- Peaslee Steel Manufacturing Research Center (PSMRC) at the Missouri University of Science and Technology, Rolla, MO, USA
This publication has 37 references indexed in Scilit:
- Effect of pressure on heat transfer coefficient at the metal/mold interface of A356 aluminum alloyInternational Communications in Heat and Mass Transfer, 2012
- A Simple Model of the Mold Boundary Condition in Direct-Chill (DC) Casting of Aluminum AlloysMetallurgical and Materials Transactions B, 2012
- Determination of interfacial heat-transfer coefficient during investment-casting process of single-crystal bladesJournal of Materials Processing Technology, 2011
- Selection of Initial Mold–Metal Interface Heat Transfer Coefficient Values in Casting Simulations—a Sensitivity AnalysisMetallurgical and Materials Transactions B, 2009
- An Investigation into the Effective Heat Transfer Coefficient in the Casting of Aluminum in a Green-Sand MoldMATERIALS TRANSACTIONS, 2009
- Directional solidification of large superalloy castings with radiation and liquid-metal cooling: A comparative assessmentMetallurgical and Materials Transactions A, 2004
- Application of an FFT-based algorithm to signal processing of LVDT position sensorsIEEE Transactions on Instrumentation and Measurement, 1998
- Rayleigh backscattering theory for single-mode optical fibersJournal of the Optical Society of America, 1983
- Mathematical model for the unidirectional solidification of metals: II. Massive moldsMetallurgical Transactions B, 1979
- Optical Refractive Index of Air: Dependence on Pressure, Temperature and CompositionApplied Optics, 1967