Riyaz Ahmad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Riyaz Ahmad has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Dharmendar Boolchandani
Department of Electronics and Communication Engineering, Malaviya National Institute of Technology, Jaipur, India
9 shared publications - Amit Mahesh Joshi
Malaviya National Institute of Technology Jaipur
4 shared publications - Tarun Varma
Department of Electronics and Communication Engineering, Malaviya National Institute of Technology, Jaipur, India
3 shared publications - Jyoti Sharma
Electronics and Communication Engineering Department, Birla Institute of Technology, Mesra, Jaipur, India
2 shared publications - Archana Singhal
Department of Electronics and Communication Engineering, Malaviya National Institute of Technology, Jaipur, India
1 shared publication - Ashutosh Yadav
Semi-Conductor Laboratory, Chandigarh, India
1 shared publication
Latest Publications
- 19 October 2024
- Published by Springer Nature
- p. 25-36
A 0.1–4.71 GHz Integer-N CP-PLL-Based Low-Power Frequency Synthesizer for High-Speed Applications
- 19 October 2024
- Published by Springer Nature
- p. 25-36
A 0.1–4.71 GHz Integer-N CP-PLL-Based Low-Power Frequency Synthesizer for High-Speed Applications
- 19 September 2024
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 44 (2) , 749-771
A Novel 571.78 MHz–11.07 GHz Tuning Range Differential Ring Oscillator Application in a PLL Frequency Synthesizer with 895 ns Lock Time
- 19 September 2024
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 44 (2) , 749-771
A Novel 571.78 MHz–11.07 GHz Tuning Range Differential Ring Oscillator Application in a PLL Frequency Synthesizer with 895 ns Lock Time
- 30 August 2024
- Published by Elsevier in Integration
- Vol. 100
A novel tunable capacitively-copuled instrumentation amplifier with 14.4 nV/ z) noise and 190.47 nW micro-power for ECG applications- 30 August 2024
- Published by Elsevier in Integration
- Vol. 100
A novel tunable capacitively-copuled instrumentation amplifier with 14.4 nV/ z) noise and 190.47 nW micro-power for ECG applications- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-11
Programmable Readout With Integrated Bandgap Reference Potentiostat for Glucose Sensing
A novel electronics interface which includes programmable readout amplifier and bandgap reference voltage potentiostat circuit for glucose electrochemical sensors is designed and implemented in 0.18 μm, CMOS process technology and 1.5 V supply voltage. One of the main advantage of proposed architecture is that it has digitally controlled readout circuit and a bandgap reference voltage potentiostat integrated into a single circuit. The proposed readout circuit i.e the programmable transimpedance amplifier (PTIA) offers wide dynamic range and low noise. The PTIA achieves an overall transimpedance gain of 17.3-50.5 kΩ . The linear output voltage range of the PTIA response is 0.55-1.44 V for an input current range of 4.2-180 μA. The output rms noise value is obtained to be 5.101 μV rms and the complete architecture dissipates a total power of 2.33 mW. The % THD varying from 0.5 to 4 for the above specified current range. A 0.6 V reference voltage has been used for all measurements produced by bandgap reference voltage potentiostat. A glassy carbon electrode (GCE) filled-in coated with CuO/Cu 0.76 CO 2.25 O 4 (copper cobaltite) is used as the working electrode. The glucose concentration ranges from 1 mM to 10 mM has been measured by electrochemical glucose sensing setup and the prototyped circuit tested for the practicability of proposed architecture. The total area of the proposed glucose sensing architecture is 0.0684 mm 2 .
- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-11
Programmable Readout With Integrated Bandgap Reference Potentiostat for Glucose Sensing
A novel electronics interface which includes programmable readout amplifier and bandgap reference voltage potentiostat circuit for glucose electrochemical sensors is designed and implemented in 0.18 μm, CMOS process technology and 1.5 V supply voltage. One of the main advantage of proposed architecture is that it has digitally controlled readout circuit and a bandgap reference voltage potentiostat integrated into a single circuit. The proposed readout circuit i.e the programmable transimpedance amplifier (PTIA) offers wide dynamic range and low noise. The PTIA achieves an overall transimpedance gain of 17.3-50.5 kΩ . The linear output voltage range of the PTIA response is 0.55-1.44 V for an input current range of 4.2-180 μA. The output rms noise value is obtained to be 5.101 μV rms and the complete architecture dissipates a total power of 2.33 mW. The % THD varying from 0.5 to 4 for the above specified current range. A 0.6 V reference voltage has been used for all measurements produced by bandgap reference voltage potentiostat. A glassy carbon electrode (GCE) filled-in coated with CuO/Cu 0.76 CO 2.25 O 4 (copper cobaltite) is used as the working electrode. The glucose concentration ranges from 1 mM to 10 mM has been measured by electrochemical glucose sensing setup and the prototyped circuit tested for the practicability of proposed architecture. The total area of the proposed glucose sensing architecture is 0.0684 mm 2 .
- 23 January 2024
- Published by Elsevier in Integration
- Vol. 96, 102162
Design and optimization of phase frequency detector through Taguchi and ANOVA statistical techniques for fast settling low power frequency synthesizer
- 23 January 2024
- Published by Elsevier in Integration
- Vol. 96, 102162
Design and optimization of phase frequency detector through Taguchi and ANOVA statistical techniques for fast settling low power frequency synthesizer
- 26 October 2023
- Published by Springer Nature
- p. 396-401
A Signal Conditioning Circuit with Integrated Bandgap Reference for Glucose Concentration Measurement
- 26 October 2023
- Published by Springer Nature
- p. 396-401
A Signal Conditioning Circuit with Integrated Bandgap Reference for Glucose Concentration Measurement
- 3 August 2023
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 42 (12) , 7045-7072
A Novel Wide Tuning Range Differential Ring Oscillator Application in Dynamically Stable and 1.17 $\upmu $s Lock Time CP-PLL Frequency Synthesizer- 3 August 2023
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 42 (12) , 7045-7072
A Novel Wide Tuning Range Differential Ring Oscillator Application in Dynamically Stable and 1.17 $\upmu $s Lock Time CP-PLL Frequency Synthesizer- Open Access
Programmable Transimpedance Amplifier with Integrated Bandgap Reference for Glucose Concentration Measurement
For glucose electrochemical sensors, a comprehensive electronics interface is designed and constructed in 0.18 um, CMOS process technology, and 1.5 V supply voltage. This interface includes a programmable readout amplifier and bandgap reference voltage potentiostat circuit. The programmable transimpedance amplifier (PTIA), the proposed readout circuit, provides a large dynamic range and low noise. The overall transimpedance increase for the PTIA is 17.3-50.5 kohm. For an input current range of 4.2-180 uA, the PTIA response has a linear output voltage range of 0.55-1.44 V. The output rms noise value is calculated to be 5.101 Vrms, and the overall power consumption of the design is 2.33 mW. The THD percentage spans from 7.6 to 10.2 in the current range mentioned above. All bandgap reference voltage potentiostat measurements are made using the reference potential of 0.6 V. The working electrode was a glassy carbon electrode (GCE) loaded with a CuO/Cu0:76CO2:25O4 (copper cobaltite) coating. An electrochemical glucose sensing setup has been used to measure glucose concentrations between 1 and 10 mM, and an emulated circuit has been used to verify the viability of the proposed glucose sensing design. The suggested glucose sensor architecture has a total size of 0.0684 mm2.
Open AccessProgrammable Transimpedance Amplifier with Integrated Bandgap Reference for Glucose Concentration Measurement
For glucose electrochemical sensors, a comprehensive electronics interface is designed and constructed in 0.18 um, CMOS process technology, and 1.5 V supply voltage. This interface includes a programmable readout amplifier and bandgap reference voltage potentiostat circuit. The programmable transimpedance amplifier (PTIA), the proposed readout circuit, provides a large dynamic range and low noise. The overall transimpedance increase for the PTIA is 17.3-50.5 kohm. For an input current range of 4.2-180 uA, the PTIA response has a linear output voltage range of 0.55-1.44 V. The output rms noise value is calculated to be 5.101 Vrms, and the overall power consumption of the design is 2.33 mW. The THD percentage spans from 7.6 to 10.2 in the current range mentioned above. All bandgap reference voltage potentiostat measurements are made using the reference potential of 0.6 V. The working electrode was a glassy carbon electrode (GCE) loaded with a CuO/Cu0:76CO2:25O4 (copper cobaltite) coating. An electrochemical glucose sensing setup has been used to measure glucose concentrations between 1 and 10 mM, and an emulated circuit has been used to verify the viability of the proposed glucose sensing design. The suggested glucose sensor architecture has a total size of 0.0684 mm2.
- 17 December 2022
- Published by Springer Nature in SN Computer Science
- Vol. 4 (2) , 1-11
Novel Programmable Readout Amplifier and Potentiostat for Glucose Sensing Applications
- 17 December 2022
- Published by Springer Nature in SN Computer Science
- Vol. 4 (2) , 1-11
Novel Programmable Readout Amplifier and Potentiostat for Glucose Sensing Applications