LRLarry Ruckman

Larry Ruckman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Larry Ruckman has a total of 187 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Machine Learning on Heterogeneous, Edge, and Quantum Hardware for Particle Physics

    by Julia Gonski, Jennifer Ott, Shiva Abbaszadeh, Sagar Addepalli, Matteo Cremonesi, Jennet Dickinson, Giuseppe Di Guglielmo, Yigit Erdem Ertorer, Lindsey Gray, Ryan Herbst, et al.

    The next generation of particle physics experiments will face an era of challenges in data acquisition, due to unprecedented data rates and volumes along with extreme environments and operational constraints. Harnessing these data for scientific discovery demands real-time inference and decision-making, intelligent data reduction, and efficient processing architectures beyond current capabilities. Crucial to the success of this experimental paradigm are several emerging technologies, such as artificial intelligence and machine learning, silicon microelectronics, and the advent of quantum algorithms and processing. Their intersection includes areas of research such as low-power and low-latency devices for edge computing, heterogeneous accelerator systems, reconfigurable hardware, codesign and synthesis strategies, readout for cryogenic or high-radiation environments, and analog computing. This white paper presents a community-driven vision to identify and prioritize research and development opportunities in hardware-based ML systems and corresponding physics applications, contributing toward a successful transition to the data frontier of fundamental science.

  • Measurement of sudden beam loss events using bunch-by-bunch BPMs at SuperKEKB

    by R. Nomaru, G. Mitsuka, L. Ruckman

    At SuperKEKB, Sudden Beam Loss (SBL) events pose a significant challenge to stable accelerator operation. To investigate and better understand SBL, we have developed a new Bunch Oscillation Recorder (BOR). Using this newly developed BOR, we successfully observed SBL events and conducted a detailed analysis of the recorded data. By analyzing the patterns of bunch position oscillations and charge loss, we found a strong correlation between SBL events and pressure burst phenomena occurring inside the vacuum chamber. These pressure bursts are known to accompany almost all SBL events, and our analysis shows that the bunch position oscillation patterns vary depending on the location of the pressure burst. Our observations suggest that bunch positions begin oscillation under some influence at the location of the pressure burst. These observations and analyses have significantly advanced our understanding of the causes and mechanisms behind SBL.


  • Open Access

    Application of RFSoC technology for beam position monitors at the SuperKEKB storage rings injection points

    by B. Urbschat, G. Mitsuka, L. Ruckman

    In order to achieve its ambitious luminosity target, the SuperKEKB collider must achieve and sustain high beam currents on the order of Ampere in its storage rings. This requires continuous top-up injection and operation with a two-bunch injection scheme, injecting two 96 ns spaced bunches in a single injection cycle. An important input for tuning the injection beam is the position reading from a dedicated beam position monitor (BPM), located after the septum magnets, slightly upstream of where the injected and stored beams converge. Previously, the readout electronics used for these special BPMs were not capable of independent measurement of both bunches in the two-bunch injection mode and modification of the concerned devices and their firmware was not feasible. The opportunity was taken to develop a new readout device based on the AMD/Xilinx RF System on a Chip (RFSoC) platform with the goal of not only providing a sufficiently flexible and performant readout solution for the concerned BPMs, but also to evaluate and gain experience with the platform for beam monitor electronics applications. This paper is concerned with the details of this development as well as evaluation and operation of the developed device.

  • Neural Network Acceleration on MPSoC Board: Integrating SLAC’s SNL and Auto-SNL

    by Hamza Ezzaoui Rahali, Abhilasha Dave, Larry Ruckman, Mohammad Mehdi Rahimifar, Audrey C. Therrien, James J. Russel, Ryan T. Herbst

    The LCLS-II Free Electron Laser (FEL) will generate X-ray pulses for beamline experiments at rates of up to 1 MHz, with detectors producing data throughputs exceeding 1 TB/s. Managing such massive data streams presents significant challenges, as transmission and storage infrastructures become prohibitively expensive. Machine learning (ML) offers a promising solution for real-time data reduction, but conventional implementations introduce excessive latency, making them unsuitable for high-speed experimental environments. To address these challenges, SLAC developed the SLAC Neural Network Library (SNL), a specialized framework designed to deploy real-time ML inference models on Field-Programmable Gate Arrays (FPGA). SNL’s key feature is the ability to dynamically update model weights without requiring FPGA resynthesis, enhancing flexibility for adaptive learning applications. To further enhance usability and accessibility, we introduce Auto-SNL, a Python extension that streamlines the process of converting Python-based neural network models into SNL-compatible high-level synthesis code. This paper presents a benchmark comparison against hls4ml, the current state-of-the-art tool, across multiple neural network architectures, fixed-point precisions, and synthesis configurations targeting a Xilinx ZCU102 FPGA. The results showed that SNL achieves competitive or superior latency in most tested architectures, while in some cases also offering FPGA resource savings. This adaptation demonstrates SNL’s versatility, opening new opportunities for researchers and academics in fields such as high-energy physics, medical imaging, robotics, and many more.


  • A compact low-level RF control system for advanced concept compact electron linear accelerator

    by C. Liu, L. Ruckman, R. Herbst, B. Hong, Z. Li, K. Kim, D. Amirari, R. Agustsson, J. Einstein-Curtis, M. Kilpatrick, et al.

    A compact low-level RF (LLRF) control system based on RF system-on-chip (RFSoC) technology has been designed for the Advanced Concept Compact Electron Linear-accelerator (ACCEL) program, which has challenging requirements in both RF performance and size, weight, and power consumption (SWaP). The compact LLRF solution employs the direct RF sampling technique of RFSoC, which samples the RF signals directly without any analog upconversion and downconversion. Compared with the conventional heterodyne based architecture used for the LLRF system of a linear accelerator (LINAC), the elimination of analog mixers can significantly reduce the size and weight of the system, especially with LINAC requiring a larger number of RF channels. Based on the requirements of ACCEL, a prototype LLRF platform has been developed, and the control schemes have been proposed. The prototype LLRF system demonstrated magnitude and phase fluctuation levels below 1% and 1° on the flattop of a 2 μs RF pulse. The LLRF control schemes proposed for ACCEL are implemented with a prototype hardware platform. This paper will introduce the new compact LLRF solution and summarize a selection of experimental test results of the prototype itself and with the accelerating structure cavities designed for ACCEL.


  • High-power test of a C-band linear accelerating structure with an RFSoC-based LLRF system

    by C. Liu, L. Ruckman, R. Herbst, D. Palmer, V. Borzenets, A. Dhar, D. Amirari, R. Agustsson, R. Berry, E. Nanni

    Normal conducting linear particle accelerators consist of multiple rf stations with accelerating structure cavities. Low-level rf (LLRF) systems are employed to set the phase and amplitude of the field in the accelerating structure and to compensate for the pulse-to-pulse fluctuation of the rf field in the accelerating structures with a feedback loop. The LLRF systems are typically implemented with analog rf mixers, heterodyne-based architectures, and discrete data converters. There are multiple rf signals from each of the rf stations, so the number of rf channels required increases rapidly with multiple rf stations. With a large number of rf channels, the footprint, component cost, and system complexity of the LLRF hardware will increase significantly. To meet the design goals of being compact and affordable for future accelerators, we have designed the next-generation LLRF (NG-LLRF) with a higher integration level based on RFSoC technology. The NG-LLRF system samples rf signals directly and performs rf mixing digitally. The NG-LLRF has been characterized in loopback mode to evaluate the performance of the system and has also been tested with a standing-wave accelerating structure, a prototype for the Cool Copper Collider (C3) with a peak rf power level up to 16.45 MW. The loopback test demonstrated amplitude fluctuation below 0.15% and phase fluctuation below 0.15°, which are considerably better than the requirements of C3. The rf signals from the different stages of the accelerating structure at different power levels are measured by the NG-LLRF, which will be critical references for the control algorithm designs. The NG-LLRF also offers flexibility in waveform modulation, so we have used rf pulses with various modulation schemes, which could be useful for controlling some of the rf stations in accelerators. In this paper, the high-power test results at different stages of the test setup will be summarized, analyzed, and discussed.


  • Development of a novel bunch oscillation recorder with RFSoC technology

    by R. Nomaru, G. Mitsuka, L. Ruckman, R. Herbst

    The SuperKEKB accelerator is designed to achieve unprecedented luminosity levels, but this goal is currently hindered by Sudden Beam Loss (SBL) events. These events not only obstruct luminosity improvement but also pose a significant risk to accelerator components, the Belle II detectors, and the superconducting focusing system, potentially leading to severe damage and quenching of the superconducting system. To address this critical challenge, we have developed a novel Bunch Oscillation Recorder (BOR) based on RFSoC technology. The BOR has demonstrated high precision with a position resolution of 0.03 mm, making it a powerful tool for real-time beam monitoring. In its initial deployment, the BOR successfully recorded multiple SBL events, providing valuable data for further analysis. By strategically positioning BORs at the suspected points of SBL origin, we aim to directly identify sources of beam instability. We anticipate that this portable, high-speed BOR monitor will play a crucial role in resolving the SBL issue, ultimately helping achieve SuperKEKB's luminosity targets.


  • Performance evaluation of an RFSoC operating in a 1.25 Tesla magnetic field

    by L. Ruckman, A. Dragone, R. Herbst

    The Belle II experiment at the SuperKEKB collider is preparing for an upgrade after 2027–2028 to handle higher luminosity and increased background rates. A Radio Frequency System-on-Chip (RFSoC) has been identified as a potential candidate for a common front-end upgrade for subsystems requiring high-speed waveform digitization. The RFSoC's ADC and DAC channels were tested across various magnetic field strengths and a few different field orientations. Power consumption and boot memory functionality were also assessed. Results indicate stable operation with negligible performance degradation, suggesting the RFSoC's viability for high-speed digitization tasks in high magnetic field environments.

  • Open Access

    SLAC microresonator RF (SMuRF) electronics: A tone-tracking readout system for superconducting microwave resonator arrays

    by Cyndia Yu, Zeeshan Ahmed, Josef C. Frisch, Shawn W. Henderson, Max Silva-Feaver, Kam Arnold, David Brown, Jake Connors, Ari J. Cukierman, J. Mitch D’ewart, et al.

    We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems, such as microwave superconducting quantum interference device multiplexers (μmux) or microwave kinetic inductance detectors. Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arrays of cryogenic sensors, which in turn necessitate highly multiplexed readout and accompanying room-temperature electronics. Microwave-frequency resonators are a popular tool for cryogenic multiplexing, with the potential to multiplex thousands of detector channels on one readout line. The SMuRF system provides the capability for reading out up to 3328 channels across a 4–8 GHz bandwidth. Notably, the SMuRF system is unique in its implementation of a closed-loop tone-tracking algorithm that minimizes RF power transmitted to the cold amplifier, substantially relaxing system linearity requirements and effective noise from intermodulation products. Here, we present a description of the hardware, firmware, and software systems of the SMuRF electronics, comparing achieved performance with science-driven design requirements. In particular, we focus on the case of large-channel-count, low-bandwidth applications, but the system has been easily reconfigured for high-bandwidth applications. The system described here has been successfully deployed in lab settings and field sites around the world and is baselined for use on upcoming large-scale observatories.


  • Development of a B-factory monolithic active pixel detector-the continuous acquisition pixel prototypes

    by M. Barbero, G. Varner, A. Bozek, T. Browder, F. Fang, M. Hazumi, A. Igarashi, S. Iwaida, J. Kennedy, N. Kent, et al.

    Future vertex detection at an upgraded KEK-B Factory, currently the highest luminosity collider in the world, will require a detector technology capable of withstanding the increased track density and the larger radiation exposure. Near the beam pipe the current silicon strip detectors have projected occupancies in excess of 100%. Advances in monolithic active pixel sensors (MAPS) look very promising to address this problem. These devices are also quite attractive due to the possibility of making them very thin - essential for improved tracking and vertexing in the low momenta environment of a B-factory. In the context of the Belle vertex detector upgrade, the major obstacles to realizing such a device have been concerns about radiation hardness and readout speed. Two prototypes implemented in the TSMC 0.35 /spl mu/m process have been developed to address these issues. Denoted the continuous acquisition pixel, or CAP, the two variants of this architecture are distinguished in that CAP2 includes an 8-deep sampling pipeline within each 22.5 /spl mu/m/sup 2/ pixel. Experience with this deep sub-micron process indicates tolerable threshold voltage shifts for ionizing radiation in excess of 20 Mrad. In order to maintain low occupancy and insensitivity to radiation-induced increased leakage current, correlated double sampling with a 10 /spl mu/s frame period is needed. Device description, hit resolution and irradiation results are presented.