Edwar Yazid
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Edwar Yazid has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Aditya Sukma Nugraha
Research Center of Smart Mechatronics, National Research and Innovation Agency, KST Samaun Samadikun , Bandung , West Java , Indonesia
2 shared publications - Ahmad Pahrurrozi
UIN Sunan Gunung Djati
1 shared publication - Budi Azhari
Research Center for Electrical Power and Mechatronics, Indonesian Institute of Sciences, Bandung, Indonesia
1 shared publication Budi Heryadi
Bandung Institute of Technology
1 shared publication- Catur Hilman Adritya Haryo Bhakti Baskoro
Research Center for Smart Mechatronics, National Research and Innovation Agency - BRIN
1 shared publication - Cheng Yee Ng
Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Malaysia
1 shared publication
Latest Publications
- Open Access
- 31 December 2024
- Published by National Research and Innovation Agency in Journal of Mechatronics, Electrical Power, and Vehicular Technology
- Vol. 15 (2) , 208-219
Three-axis flexible tube sensor with LSTM-based force prediction for alignment of electric vehicle charging ports
This paper introduces a novel three-axis flexible tube sensor designed for force measurement in electric vehicle (EV) charging port alignment, utilizing long short-term memory (LSTM) networks. The research aims to develop and validate a flexible and accurate sensor system capable of predicting multi-axis forces during alignment. The sensor integrates a magnetic sensor at the center of a flexible tube to capture three-dimensional (3-D) magnetic field variations corresponding to force changes. Fabricated using thermoplastic polyurethane (TPU) via 3-D printing technology, the sensor leverages machine learning to predict force values along the , , and axes ( , , ). Finite element method (FEM) analysis was conducted to assess the deflection characteristics of the flexible tube under various force conditions. Experimental results demonstrate that integrating LSTM significantly enhances the accuracy of force prediction, achieving an R² score exceeding 97 % for all axes, with mean squared error (MSE) values of 0.2819 for the -axis, 0.3567 for the -axis, and 2.8086 for the -axis. The sensor is capable of measuring forces up to 30 N without exceeding its elastic limits. These findings highlight the sensor’s potential for improving alignment accuracy and reliability in automated EV charging systems.
- 31 December 2024
- Published by National Research and Innovation Agency in Journal of Mechatronics, Electrical Power, and Vehicular Technology
- Vol. 15 (2) , 208-219
Open AccessThree-axis flexible tube sensor with LSTM-based force prediction for alignment of electric vehicle charging ports
This paper introduces a novel three-axis flexible tube sensor designed for force measurement in electric vehicle (EV) charging port alignment, utilizing long short-term memory (LSTM) networks. The research aims to develop and validate a flexible and accurate sensor system capable of predicting multi-axis forces during alignment. The sensor integrates a magnetic sensor at the center of a flexible tube to capture three-dimensional (3-D) magnetic field variations corresponding to force changes. Fabricated using thermoplastic polyurethane (TPU) via 3-D printing technology, the sensor leverages machine learning to predict force values along the , , and axes ( , , ). Finite element method (FEM) analysis was conducted to assess the deflection characteristics of the flexible tube under various force conditions. Experimental results demonstrate that integrating LSTM significantly enhances the accuracy of force prediction, achieving an R² score exceeding 97 % for all axes, with mean squared error (MSE) values of 0.2819 for the -axis, 0.3567 for the -axis, and 2.8086 for the -axis. The sensor is capable of measuring forces up to 30 N without exceeding its elastic limits. These findings highlight the sensor’s potential for improving alignment accuracy and reliability in automated EV charging systems.
- 22 May 2024
- Published by Wiley in Polymer International
- Vol. 73 (9) , 727-747
Fabrication and characterization of PZT / PVDF composite films for force sensor applications
This study explored the impact of hot press parameters on lead zirconate titanate (PZT)/poly(vinylidene fluoride) (PVDF) composite films designed for force‐sensing applications. The systematic fraction (PZT/PVDF), pressure, temperature, and time during hot pressing processes are subject to variation. The focus is on the resulting composite film thickness and its subsequent influence on the piezoelectric properties, which are essential for the performance of force sensors. The present study investigated the characteristics and performance of PZT/PVDF composite films with fraction ratios 2/5, 5/5, and 7/3 and hot pressure of 10, 40, and 60 MPa and temperature at 150 °C for 2 h. The characterization of these films was conducted using X‐ray diffraction, Fourier transform infrared spectroscopy, atomic force microscopy, and scanning electron microscopy. The piezoelectric properties ( d 33 and d 31 ) were measured using impact and extraction tests to evaluate the performance of films with applied forces. The results show that the highest piezoelectric coefficients ( d 33 and d 31 ) were determined to be 35.8 and 12.60 pC N −1 , with fraction ratios of 7/3 and 2/5. The study revealed a positive correlation between the PZT/PVDF ratio and sensitivity, indicating that an increase in the ratio leads to an increase in sensitivity. Conversely, a negative relationship was observed between the impact load and the sensor sensitivity, suggesting that an increase in the impact load results in a sensitivity decrease. The results of this work demonstrate the great potential of piezoelectric PZT/PVDF composite films in force sensors for small load applications. © 2024 Society of Chemical Industry.
- 22 May 2024
- Published by Wiley in Polymer International
- Vol. 73 (9) , 727-747
Fabrication and characterization of PZT / PVDF composite films for force sensor applications
This study explored the impact of hot press parameters on lead zirconate titanate (PZT)/poly(vinylidene fluoride) (PVDF) composite films designed for force‐sensing applications. The systematic fraction (PZT/PVDF), pressure, temperature, and time during hot pressing processes are subject to variation. The focus is on the resulting composite film thickness and its subsequent influence on the piezoelectric properties, which are essential for the performance of force sensors. The present study investigated the characteristics and performance of PZT/PVDF composite films with fraction ratios 2/5, 5/5, and 7/3 and hot pressure of 10, 40, and 60 MPa and temperature at 150 °C for 2 h. The characterization of these films was conducted using X‐ray diffraction, Fourier transform infrared spectroscopy, atomic force microscopy, and scanning electron microscopy. The piezoelectric properties ( d 33 and d 31 ) were measured using impact and extraction tests to evaluate the performance of films with applied forces. The results show that the highest piezoelectric coefficients ( d 33 and d 31 ) were determined to be 35.8 and 12.60 pC N −1 , with fraction ratios of 7/3 and 2/5. The study revealed a positive correlation between the PZT/PVDF ratio and sensitivity, indicating that an increase in the ratio leads to an increase in sensitivity. Conversely, a negative relationship was observed between the impact load and the sensor sensitivity, suggesting that an increase in the impact load results in a sensitivity decrease. The results of this work demonstrate the great potential of piezoelectric PZT/PVDF composite films in force sensors for small load applications. © 2024 Society of Chemical Industry.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 152-157
Angular Position Control of Brushless DC Motor Using Cuckoo Search algorithm Optimized PD Controller
Controlling the angular position of brushless DC (BLDC) motor is an essential task to improve the transient and the steady state performances under loaded condition. Many problems in BLDC controlling, one of them is the overshoot so that the angular position control of BLDC motor using cuckoo search algorithm optimized proportional derivative (PD) controller to form what the so-called the cuckoo-PD (Cuckoo-PD) controller is proposed in this paper. Control system is realized in a microcontroller namely a 16MHz Atmega 2560 with an absolute encoder as a position sensor. The effectiveness of the Cuckoo-PD controller is tested under constant and varying step functions with the Ziegler-Nichols-PD (ZN-PD) controller as a benchmark. Experimental results show that the Cuckoo-PD controller has slower speed than the ZN-PD controller, but the latter has overshoot and small oscillations during its steady state condition as a consequent of having a fast rise time.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 152-157
Angular Position Control of Brushless DC Motor Using Cuckoo Search algorithm Optimized PD Controller
Controlling the angular position of brushless DC (BLDC) motor is an essential task to improve the transient and the steady state performances under loaded condition. Many problems in BLDC controlling, one of them is the overshoot so that the angular position control of BLDC motor using cuckoo search algorithm optimized proportional derivative (PD) controller to form what the so-called the cuckoo-PD (Cuckoo-PD) controller is proposed in this paper. Control system is realized in a microcontroller namely a 16MHz Atmega 2560 with an absolute encoder as a position sensor. The effectiveness of the Cuckoo-PD controller is tested under constant and varying step functions with the Ziegler-Nichols-PD (ZN-PD) controller as a benchmark. Experimental results show that the Cuckoo-PD controller has slower speed than the ZN-PD controller, but the latter has overshoot and small oscillations during its steady state condition as a consequent of having a fast rise time.
- 1 January 2016
- Published by Elsevier in Applied Ocean Research
- Vol. 54, 53-66
Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model
- 1 January 2016
- Published by Elsevier in Applied Ocean Research
- Vol. 54, 53-66
Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model