Athina Varotsou
Athina Varotsou has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Marine Ruffenach
Centre National dEtudes Spatiales (CNES), Toulouse, France
3 shared publications - Francoise Bezerra
CNES, Toulouse, France
2 shared publications - Frederic Wrobel
Institut d’Électronique et des Systèmes (IES), UMR-CNRS 5214, University of Montpellier, Montpellier, France
2 shared publications - Hugo Cintas
Institute of Experimental and Applied Physics, Czech Technical University in Prague, 110 00 Prague, Czech Republic
2 shared publications - Jeremy Guillermin
TRAD Tests and Radiations, Labge, France
2 shared publications - Julien Mekki
Centre National dEtudes Spatiales (CNES), Toulouse, France
2 shared publications
Latest Publications
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2480-2489
Investigation of the Limits of the Ray-Tracing Method Applied on Dose Analysis for Radiation Hardness Assurance
Radiation hardness assurance (RHA) is critical for a space project as it ensures that electronics will perform to their design specifications during exposure to the mission’s radiation environment. The ray-tracing method (or sector analysis) is commonly used by radiation engineers to estimate the dose at electronic component level, however it relies on specific hypotheses. In this paper, the limits of the ray-tracing method are investigated to understand how the method can be improved and to propose recommendations for the dose calculation. As a first step, the impact of the shielding sectoring resolution is explored and the results are compared to the recommendations of the ECSS-E-ST-10-12C. The second part of the paper investigates the influence of the shielding material on the dose curve computation, the main input of the ray-tracing calculation. Finally, the role of the spacing between different materials as well as the distribution of materials along the particle path is explored.
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2480-2489
Investigation of the Limits of the Ray-Tracing Method Applied on Dose Analysis for Radiation Hardness Assurance
Radiation hardness assurance (RHA) is critical for a space project as it ensures that electronics will perform to their design specifications during exposure to the mission’s radiation environment. The ray-tracing method (or sector analysis) is commonly used by radiation engineers to estimate the dose at electronic component level, however it relies on specific hypotheses. In this paper, the limits of the ray-tracing method are investigated to understand how the method can be improved and to propose recommendations for the dose calculation. As a first step, the impact of the shielding sectoring resolution is explored and the results are compared to the recommendations of the ECSS-E-ST-10-12C. The second part of the paper investigates the influence of the shielding material on the dose curve computation, the main input of the ray-tracing calculation. Finally, the role of the spacing between different materials as well as the distribution of materials along the particle path is explored.
- 19 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1638-1644
Proton, Electron, and Photon Flux Measurement and Simulation During Stratospheric Balloon Flights
This paper compares three models of the atmospheric radiative environment: MAIRE (Model of Atmospheric Ionizing Radiative Effects), EXPACS (Excel-based Program for calculating Atmospheric Cosmic-ray Spectrum) and RAMSEES (Radiation Atmospheric Model for Single Event Effect Simulation) to experimental fluxes measured at different altitudes. The PIX CNES (Centre National d’Etudes Spatiales) instrument recorded the fluxes during five stratospheric flights. There is no standard way to model the atmospheric radiative environment today. Each model uses its own Monte Carlo toolkit, modeling the atmosphere and primary particles. The Radiations Atmospheric Model for SEE Simulation (RAMSEES) was created by Geant4 simulation of the Extensive Air Shower (EAS) phenomenon generated by highly energetic Galactic Cosmic Rays (GCR) in 100 km of atmosphere. By using PIX fluxes, this paper aims to benchmark the models with experimental data at multiple altitudes. Three integral fluxes were used in this paper at a comparison point: photons >0.823 MeV, electrons >10.27 MeV, and protons >80 MeV. MAIRE shows good agreement with all the experimental fluxes from 5 to 40 km. MAIRE predictions show remarkable agreement with the PIX photon fluxes. EXPACS predictions are in a magnitude order of PIX measurements but tend to underestimate the fluxes. Finally, RAMSEES predictions agree with PIX fluxes for protons, electrons, and photons at altitudes of 5 to 32.5 km. Moreover, RAMSEES shows a significant agreement with PIX proton fluxes.
- 19 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1638-1644
Proton, Electron, and Photon Flux Measurement and Simulation During Stratospheric Balloon Flights
This paper compares three models of the atmospheric radiative environment: MAIRE (Model of Atmospheric Ionizing Radiative Effects), EXPACS (Excel-based Program for calculating Atmospheric Cosmic-ray Spectrum) and RAMSEES (Radiation Atmospheric Model for Single Event Effect Simulation) to experimental fluxes measured at different altitudes. The PIX CNES (Centre National d’Etudes Spatiales) instrument recorded the fluxes during five stratospheric flights. There is no standard way to model the atmospheric radiative environment today. Each model uses its own Monte Carlo toolkit, modeling the atmosphere and primary particles. The Radiations Atmospheric Model for SEE Simulation (RAMSEES) was created by Geant4 simulation of the Extensive Air Shower (EAS) phenomenon generated by highly energetic Galactic Cosmic Rays (GCR) in 100 km of atmosphere. By using PIX fluxes, this paper aims to benchmark the models with experimental data at multiple altitudes. Three integral fluxes were used in this paper at a comparison point: photons >0.823 MeV, electrons >10.27 MeV, and protons >80 MeV. MAIRE shows good agreement with all the experimental fluxes from 5 to 40 km. MAIRE predictions show remarkable agreement with the PIX photon fluxes. EXPACS predictions are in a magnitude order of PIX measurements but tend to underestimate the fluxes. Finally, RAMSEES predictions agree with PIX fluxes for protons, electrons, and photons at altitudes of 5 to 32.5 km. Moreover, RAMSEES shows a significant agreement with PIX proton fluxes.
- 11 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1699-1706
Proposal of a Multiscale High Accuracy Engineering Approach for Single-Event Effects Analysis in Modern Technologies
Standard Heavy-Ion Single Event Rate estimation methods are well adapted to mature technologies used in the space industry. However, the adoption of 3D structures as well as advanced technology nodes may reduce the confidence in established rate estimation methods such as IRPP. In this work, an SEE rate calculation method with a GEANT4 based Monte-Carlo approach was designed in order to address this shortcoming. It is intended as an extension to the IRPP method in the context of advanced technologies in the space industry. This paper presents the general concepts and theory behind this approach, as well as results from validation cases based on flight data.
- 11 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1699-1706
Proposal of a Multiscale High Accuracy Engineering Approach for Single-Event Effects Analysis in Modern Technologies
Standard Heavy-Ion Single Event Rate estimation methods are well adapted to mature technologies used in the space industry. However, the adoption of 3D structures as well as advanced technology nodes may reduce the confidence in established rate estimation methods such as IRPP. In this work, an SEE rate calculation method with a GEANT4 based Monte-Carlo approach was designed in order to address this shortcoming. It is intended as an extension to the IRPP method in the context of advanced technologies in the space industry. This paper presents the general concepts and theory behind this approach, as well as results from validation cases based on flight data.
- Open Access
RAMSEES: A Model of the Atmospheric Radiative Environment Based on Geant4 Simulation of Extensive Air Shower
The device downscaling of electronic components has given rise to the need to consider specific failures in onboard airplane electronics. Single Event Effects (SEE) are a kind of failures that occur due to radiation in the atmosphere. For the purpose of ensuring onboard electronic reliability, there is a clear need for new tools to predict the SEE rate, at both avionic altitudes and at ground level. In this work, we develop a new tool: RAMSEES (Radiation Atmospheric Model for SEE Simulation), which simulates the atmospheric radiative environment induced by cosmic rays. This multiscale and multi-physics phenomenon is simulated using the Geant4 toolkit, allowing the creation of a database to characterize the radiation environment in the atmosphere as a function of altitude. We show the need to simulate very high-energy particles such as 100 TeV space protons, because they are the main contributor of radiation at avionic altitudes as well as at ground level. Our approach shows a good agreement with the experimental data, the standards, and other models, and it also points out some discrepancies, especially below 18 km of altitude. RAMSEES can be the basis of the estimation of the SEE rate from ground level to the stratosphere, at any given position and time.
Open AccessRAMSEES: A Model of the Atmospheric Radiative Environment Based on Geant4 Simulation of Extensive Air Shower
The device downscaling of electronic components has given rise to the need to consider specific failures in onboard airplane electronics. Single Event Effects (SEE) are a kind of failures that occur due to radiation in the atmosphere. For the purpose of ensuring onboard electronic reliability, there is a clear need for new tools to predict the SEE rate, at both avionic altitudes and at ground level. In this work, we develop a new tool: RAMSEES (Radiation Atmospheric Model for SEE Simulation), which simulates the atmospheric radiative environment induced by cosmic rays. This multiscale and multi-physics phenomenon is simulated using the Geant4 toolkit, allowing the creation of a database to characterize the radiation environment in the atmosphere as a function of altitude. We show the need to simulate very high-energy particles such as 100 TeV space protons, because they are the main contributor of radiation at avionic altitudes as well as at ground level. Our approach shows a good agreement with the experimental data, the standards, and other models, and it also points out some discrepancies, especially below 18 km of altitude. RAMSEES can be the basis of the estimation of the SEE rate from ground level to the stratosphere, at any given position and time.