Ximing Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ximing Liu has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Shiqiang Zheng
Beihang University
12 shared publications - Haifeng Zhang
School of Instrumentation Science and Optoelectronics Engineering, Beihang University, Beijing, China
3 shared publications - Haitao Li
School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, China
3 shared publications - Kun Wang
School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, China
3 shared publications - Rui Feng
School of Instrumentation Science and Optoelectronics Engineering, Beihang University, Beijing, China
3 shared publications - Yun Le
School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, China
3 shared publications
Latest Publications
- 9 October 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 412
Design and optimization method of self-shielded biplanar coils under spatial constraints for miniaturized OPM
- 9 October 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 412
Design and optimization method of self-shielded biplanar coils under spatial constraints for miniaturized OPM
- Top Cited Papers
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-12
Design of Hybrid Magnetic Bearings Based on Integrated Equivalent Magnetic Network Modeling and Sensitivity Analysis for Optimization
Hybrid magnetic bearings (HMBs) play a critical role in allowing magnetically suspended turbomolecular pumps to attain ultra-high vacuum conditions. However, current modeling and optimization approaches for HMB design do not account for the magnetic field coupling between the HMBs and the motor. This omission leads to deviations in the model, inaccurate optimization directions, and difficulties in designing magnetic suspension systems that simultaneously achieve high load capacity and a more compact integrated structure. To address this issue, this article presents a comprehensive HMB design method integrating modeling, sensitivity analysis, and optimization. First, the integrated equivalent magnetic network model is established to analyze the electromagnetic characteristics of the HMBs, which accounts for magnetic coupling effects. Then, a pointwise sensitivity analysis is proposed to quantify the influence of design variables on multiple objectives across the feasible domain and is incorporated into a multiobjective particle swarm optimization algorithm to efficiently guide the search direction. Compared with the preoptimization design, the proposed method improves the weighted average of the maximum radial forces of the two HMBs by 57.03%, reduces the axial length by 11.52%, and mitigates the magnetic coupling by 71.85%. Finally, both simulation and experimental results confirm the effectiveness of the proposed method.
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-12
Top Cited PapersDesign of Hybrid Magnetic Bearings Based on Integrated Equivalent Magnetic Network Modeling and Sensitivity Analysis for Optimization
Hybrid magnetic bearings (HMBs) play a critical role in allowing magnetically suspended turbomolecular pumps to attain ultra-high vacuum conditions. However, current modeling and optimization approaches for HMB design do not account for the magnetic field coupling between the HMBs and the motor. This omission leads to deviations in the model, inaccurate optimization directions, and difficulties in designing magnetic suspension systems that simultaneously achieve high load capacity and a more compact integrated structure. To address this issue, this article presents a comprehensive HMB design method integrating modeling, sensitivity analysis, and optimization. First, the integrated equivalent magnetic network model is established to analyze the electromagnetic characteristics of the HMBs, which accounts for magnetic coupling effects. Then, a pointwise sensitivity analysis is proposed to quantify the influence of design variables on multiple objectives across the feasible domain and is incorporated into a multiobjective particle swarm optimization algorithm to efficiently guide the search direction. Compared with the preoptimization design, the proposed method improves the weighted average of the maximum radial forces of the two HMBs by 57.03%, reduces the axial length by 11.52%, and mitigates the magnetic coupling by 71.85%. Finally, both simulation and experimental results confirm the effectiveness of the proposed method.
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-12
Comprehensive Dynamic Modeling and Control of the Flexible Foundation-Active Magnetic Bearings-Rotor System
Conventional dynamic models lack the capability to incorporate the intricate coupling effects and resulting dynamic uncertainties when the magnetically suspended flywheel (MSF) is supported by a flexible foundation, leading to restricted performance in current vibration suppression methods. To address this challenge, a comprehensive framework for dynamic modeling and computation is presented in this article. This article introduces velocity spinors to describe system motion efficiently and calculate kinetic energy. This approach significantly simplifies the calculation process in modeling the high-dimensional flexible foundation-active magnetic bearings (AMBs)-rotor system without compromising accuracy. With this model, we quantitatively analyze the influence of flexible support characteristics and flywheel control parameters on system stability and coupled vibration. Furthermore, corresponding methods for stable control and vibration suppression are proposed. The accuracy of the established dynamic model and computational framework is validated through experiments performed on the MSF prototype. This model allows researchers to optimize the support characteristics of the flexible foundation and the flywheel control parameters before on-orbit operation, ensuring the stable operation and active vibration suppression of the MSF under varying support conditions.
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-12
Comprehensive Dynamic Modeling and Control of the Flexible Foundation-Active Magnetic Bearings-Rotor System
Conventional dynamic models lack the capability to incorporate the intricate coupling effects and resulting dynamic uncertainties when the magnetically suspended flywheel (MSF) is supported by a flexible foundation, leading to restricted performance in current vibration suppression methods. To address this challenge, a comprehensive framework for dynamic modeling and computation is presented in this article. This article introduces velocity spinors to describe system motion efficiently and calculate kinetic energy. This approach significantly simplifies the calculation process in modeling the high-dimensional flexible foundation-active magnetic bearings (AMBs)-rotor system without compromising accuracy. With this model, we quantitatively analyze the influence of flexible support characteristics and flywheel control parameters on system stability and coupled vibration. Furthermore, corresponding methods for stable control and vibration suppression are proposed. The accuracy of the established dynamic model and computational framework is validated through experiments performed on the MSF prototype. This model allows researchers to optimize the support characteristics of the flexible foundation and the flywheel control parameters before on-orbit operation, ensuring the stable operation and active vibration suppression of the MSF under varying support conditions.
- 13 May 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (23)
A method for improving the stability and accuracy of active magnetic compensation system for magnetic shielding rooms
Active magnetic compensation (AMC) technology contributes to the realization of an extremely weak magnetic environment in magnetic shielding rooms (MSR), which is of great significance for measuring biomagnetic signal using an optically pumped magnetometer (OPM) sensor. However, sensor delay degrades the stability of the AMC system, while random magnetic field disturbances impair control accuracy. An active disturbance rejection control method combined with filtered Smith predictor (ADRC-FSP) is proposed to effectively compensate for sensor delay while suppressing random magnetic field disturbances. First, the structure of the AMC system is analyzed, and a mathematical model is established. Then, considering the action path of random disturbances, an ADRC-FSP is designed. Finally, simulations and experiments verify the effectiveness of proposed method, demonstrating improved system stability and a 34.9% increase in compensation accuracy. It has an important contribution to the measurement of biomagnetic signals.
- 13 May 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (23)
A method for improving the stability and accuracy of active magnetic compensation system for magnetic shielding rooms
Active magnetic compensation (AMC) technology contributes to the realization of an extremely weak magnetic environment in magnetic shielding rooms (MSR), which is of great significance for measuring biomagnetic signal using an optically pumped magnetometer (OPM) sensor. However, sensor delay degrades the stability of the AMC system, while random magnetic field disturbances impair control accuracy. An active disturbance rejection control method combined with filtered Smith predictor (ADRC-FSP) is proposed to effectively compensate for sensor delay while suppressing random magnetic field disturbances. First, the structure of the AMC system is analyzed, and a mathematical model is established. Then, considering the action path of random disturbances, an ADRC-FSP is designed. Finally, simulations and experiments verify the effectiveness of proposed method, demonstrating improved system stability and a 34.9% increase in compensation accuracy. It has an important contribution to the measurement of biomagnetic signals.
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-12
Measurement of Touchdown Bearing Installation Position Deviation Based on an Inductance Model
Excessive installation position deviation of touch-down bearings (TDBs) in magnetic suspension systems can significantly aggravate rotor vibration and compromise system stability. Timely and effective detection of such installation deviations is therefore essential. Conventional measurement methods generally depend on external control systems, which limits efficiency and restricts their applicability in large-scale production testing. This paper proposes an inductance-based method for measuring TDB installation position deviation by exploiting the intrinsic electrical characteristics of magnetic bearings. First, a magnetic reluctance network model that explicitly incorporates material properties and fringing flux effects is developed to accurately capture the forward relationship between coil inductance and air-gap length. Then, by measuring the coil inductance during the rotor’s approach to the TDB, the air gap constrained by the TDB is inversely reconstructed, allowing the installation position deviation to be determined without additional sensors or control intervention. Finally, both simulation and experimental validations are conducted. The simulation results validate the inductance–air-gap model and provide a theoretical foundation for the feasibility of the proposed method. Experimental results, compared with those obtained using traditional measurement methods, show a maximum relative error of 6.67% of the rotor’s movable air gap for radial measurements and 5% for axial measurements. The proposed method demonstrates high consistency with conventional approaches and enables accurate, efficient detection of TDB installation position deviations without the need for external control systems, making it well suited for production-line testing.
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-12
Measurement of Touchdown Bearing Installation Position Deviation Based on an Inductance Model
Excessive installation position deviation of touch-down bearings (TDBs) in magnetic suspension systems can significantly aggravate rotor vibration and compromise system stability. Timely and effective detection of such installation deviations is therefore essential. Conventional measurement methods generally depend on external control systems, which limits efficiency and restricts their applicability in large-scale production testing. This paper proposes an inductance-based method for measuring TDB installation position deviation by exploiting the intrinsic electrical characteristics of magnetic bearings. First, a magnetic reluctance network model that explicitly incorporates material properties and fringing flux effects is developed to accurately capture the forward relationship between coil inductance and air-gap length. Then, by measuring the coil inductance during the rotor’s approach to the TDB, the air gap constrained by the TDB is inversely reconstructed, allowing the installation position deviation to be determined without additional sensors or control intervention. Finally, both simulation and experimental validations are conducted. The simulation results validate the inductance–air-gap model and provide a theoretical foundation for the feasibility of the proposed method. Experimental results, compared with those obtained using traditional measurement methods, show a maximum relative error of 6.67% of the rotor’s movable air gap for radial measurements and 5% for axial measurements. The proposed method demonstrates high consistency with conventional approaches and enables accurate, efficient detection of TDB installation position deviations without the need for external control systems, making it well suited for production-line testing.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Model Predictive Control for Real-Time Stabilization of Magnetic Field Using NMOR Atomic Magnetometers
Accurate calibration of atomic magnetometers and the detection of weak magnetic signals in applications such as biomagnetism and fundamental physics experiments are hindered by low-frequency environmental disturbances that mask useful signals. To address this, we implement a magnetic field reference source system that integrates an NMOR atomic magnetometer with a predictive-control-based active compensation loop. The system establishes a quiet and stable magnetic environment, supporting both magnetometer calibration and weak-field measurements. By modeling the NMOR response, the relation between field variation and demodulated phase is derived and used as a robust error signal for stabilization. Under a 10000 nT bias field, the system suppresses low-frequency noise by 42.6 dB compared with passive shielding and achieves residual levels of 264 fT/√Hz at 0.1 Hz. Allan deviation analysis further verifies improved long-term stability, enabling accurate biomagnetic and low-field NMR studies as well as performance evaluation of precision magnetometers.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Model Predictive Control for Real-Time Stabilization of Magnetic Field Using NMOR Atomic Magnetometers
Accurate calibration of atomic magnetometers and the detection of weak magnetic signals in applications such as biomagnetism and fundamental physics experiments are hindered by low-frequency environmental disturbances that mask useful signals. To address this, we implement a magnetic field reference source system that integrates an NMOR atomic magnetometer with a predictive-control-based active compensation loop. The system establishes a quiet and stable magnetic environment, supporting both magnetometer calibration and weak-field measurements. By modeling the NMOR response, the relation between field variation and demodulated phase is derived and used as a robust error signal for stabilization. Under a 10000 nT bias field, the system suppresses low-frequency noise by 42.6 dB compared with passive shielding and achieves residual levels of 264 fT/√Hz at 0.1 Hz. Allan deviation analysis further verifies improved long-term stability, enabling accurate biomagnetic and low-field NMR studies as well as performance evaluation of precision magnetometers.
- 8 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Spatial Magnetic Field Equalization Compensation of Magnetic Shielding Rooms Based on Multisensor Feedback
Active magnetic compensation (AMC) is essential for maintaining a stable near-zero magnetic environment and improving the signal-to-noise ratio of magnetoencephalography (MEG) measurements based on optically pumped magnetometers (OPMs). However, reducing the overall magnetic field noise level within the uniform area in MEG measurements remains a challenging issue for low-cost miniaturized magnetic shielding rooms (MSRs). This work proposes a spatial magnetic field equalization (SMFE) method based on multi-sensor feedback that addresses two key challenges in spatial magnetic field compensation: sensor delay and weight allocation. First, the active magnetic field compensation system is modeled, and a sensor delay compensation scheme based on the gain-adaptive Smith predictor is established to improve the parameter margin and system performance. Then, the layout of the sensors is designed and the multi-sensor weight allocation scheme is optimized to achieve the spatial magnetic field equalization compensation. Finally, simulation and experimental results on miniaturized MSR demonstrate the effectiveness of the proposed method.
- 8 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Spatial Magnetic Field Equalization Compensation of Magnetic Shielding Rooms Based on Multisensor Feedback
Active magnetic compensation (AMC) is essential for maintaining a stable near-zero magnetic environment and improving the signal-to-noise ratio of magnetoencephalography (MEG) measurements based on optically pumped magnetometers (OPMs). However, reducing the overall magnetic field noise level within the uniform area in MEG measurements remains a challenging issue for low-cost miniaturized magnetic shielding rooms (MSRs). This work proposes a spatial magnetic field equalization (SMFE) method based on multi-sensor feedback that addresses two key challenges in spatial magnetic field compensation: sensor delay and weight allocation. First, the active magnetic field compensation system is modeled, and a sensor delay compensation scheme based on the gain-adaptive Smith predictor is established to improve the parameter margin and system performance. Then, the layout of the sensors is designed and the multi-sensor weight allocation scheme is optimized to achieve the spatial magnetic field equalization compensation. Finally, simulation and experimental results on miniaturized MSR demonstrate the effectiveness of the proposed method.
- 23 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (1) , 1313-1321
Speed Fluctuation Suppression Method for Gimbal Servo System With Harmonic Drive by Disturbance Observer Based Sliding Mode Control
The torque accuracy of a control moment gyro (CMG) relies heavily on the speed accuracy of the gimbal servo system, where kinematic error from harmonic drive cause significant speed fluctuations. To address this problem, a sliding mode control (SMC) feedback controller based on the disturbance observer (DOB) containing the $\mathbf{W}$ matrix (WDOB) was proposed. It not only meets the response requirements of the system, but also suppresses the chattering phenomenon of the SMC. Since kinematic error has periodic changes and varies with angular velocity, existing DOBs are ineffective for accurate estimation. An exogenous system matrix $\mathbf{W}$ that adapts to angular velocity, is embedded in a DOB to improve the disturbance estimation accuracy. Both simulation and experimental results show that the proposed WDOB-SMC can effectively suppress the speed fluctuations and enhance the dynamic performance of the system.
- 23 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (1) , 1313-1321
Speed Fluctuation Suppression Method for Gimbal Servo System With Harmonic Drive by Disturbance Observer Based Sliding Mode Control
The torque accuracy of a control moment gyro (CMG) relies heavily on the speed accuracy of the gimbal servo system, where kinematic error from harmonic drive cause significant speed fluctuations. To address this problem, a sliding mode control (SMC) feedback controller based on the disturbance observer (DOB) containing the $\mathbf{W}$ matrix (WDOB) was proposed. It not only meets the response requirements of the system, but also suppresses the chattering phenomenon of the SMC. Since kinematic error has periodic changes and varies with angular velocity, existing DOBs are ineffective for accurate estimation. An exogenous system matrix $\mathbf{W}$ that adapts to angular velocity, is embedded in a DOB to improve the disturbance estimation accuracy. Both simulation and experimental results show that the proposed WDOB-SMC can effectively suppress the speed fluctuations and enhance the dynamic performance of the system.
- 14 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (1) , 1292-1301
Commutation Error Autocorrection Method of Position Sensorless BLDCM Based on Terminal Voltage Transformation
This article focuses on a commutation error autocorrection method of position sensorless brushless dc motor, implemented through terminal voltage transformation. First, based on the correlation between commutation error and the inactive phase terminal voltage integral (IPTVI), a conversion circuit, transforming the IPTVI into a smoothly-varying analog voltage, is developed. Then, a closed-loop controller fed by the voltage sampled in low-frequency is established to correct the commutation automatically. This approach overcomes the conventional limitation of high sampling speed required for accurate feedback, enabling precise commutation error correction. Finally, experiments on a magnetically suspended control moment gyro verify the proposed method.
- 14 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (1) , 1292-1301
Commutation Error Autocorrection Method of Position Sensorless BLDCM Based on Terminal Voltage Transformation
This article focuses on a commutation error autocorrection method of position sensorless brushless dc motor, implemented through terminal voltage transformation. First, based on the correlation between commutation error and the inactive phase terminal voltage integral (IPTVI), a conversion circuit, transforming the IPTVI into a smoothly-varying analog voltage, is developed. Then, a closed-loop controller fed by the voltage sampled in low-frequency is established to correct the commutation automatically. This approach overcomes the conventional limitation of high sampling speed required for accurate feedback, enabling precise commutation error correction. Finally, experiments on a magnetically suspended control moment gyro verify the proposed method.