HSHeyang Sun

Heyang Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Heyang Sun has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Topology and Control of Series-Shunt Enhanced Soft Normally Open Point Integrated With PV and ES for Medium-Voltage Direct-Linked Grid Connection

    by Jingyue Wang, Di Zhu, Chuang Liu, Jianwen Zhang, Yu Jiang, Heyang Sun

    The enhanced soft normally-open point (e-SNOP) regulates the power flow of medium-voltage ac (MVAC) feeders, while providing low-voltage dc (LVDC) ports for the flexible integration of distributed energy resources. However, its implementation typically requires a large number of power converters. To address this issue, this paper proposes a series- shunt e-SNOP topology integrated with photovoltaic (PV) and energy storage. The shunt unit of this topology offers multiple LVDC ports, enabling the direct connection of distributed PV generation and energy storage, while the series unit features expendable MVAC feeder interfaces to support flexible power flow regulation. Meanwhile, this topology adopts a single-stage dc-ac submodule design, reducing capacitors and simplifying control strategy complexity. First, this paper introduces the topological configuration and its submodule's working principles. Then, its average circuit model is established. Additionally, the three operation modes and their corresponding control strategies are designed. Finally, the effectiveness of the proposed control strategies is verified through a 10-kV/3-MW full power simulation platform, and a 1-kW scaled-down experimental prototype is built to further demonstrate the correctness of the proposed topology.

  • Short-Circuit Fault Ride-Through Method for Dual-Active-Bridge Converters Considering DC-Voltage Inertia Support

    by Heyang Sun, Chuang Liu, Dehao Kong

    The DC distribution network has the characteristics of “low inertia” and “low damping,” among which pole to pole short circuit fault is the most serious type of fault in the DC distribution system. When a short-circuit fault occurs, the port voltage of the dual active bridge (DAB) converter drops sharply. However, there is a risk that the DC circuit breaker (DCCB) may not be able to operate in a timely manner, which can lead to overcurrent locking inside the DAB converter and trigger emergency power outages in the distribution substation area. Therefore, this paper proposes a fault ride-through (FRT) method with voltage inertia support capability. By incorporating a DC voltage inertia support (DC-VIS) circuit at the output port of the DAB converter, the rate of port voltage decline during short-circuit fault conditions is effectively slowed through designing support capacitance. This provides additional time for system identification and DCCB operation while eliminating the risk of overcurrent inside the DAB converter. Under normal conditions with the support capacitor fully charged, the proposed structure does not affect the dynamic response capability of the DAB converter. Furthermore, based on the DC-VIS circuit, an adaptive dynamic limiting strategy is designed to maximize the transmission power of the DAB converter while ensuring coordinated control among multiple modules. The effectiveness of the proposed method is validated through simulations and experiments.

  • Single-Stage Multiport Solid-State Transformer Based Medium-Voltage DC Interconnection System and Coordinated Control Strategies

    by Di Zhu, Chuang Liu, Jingyue Wang, Zhongchen Pei, Chao Liu, Heyang Sun, Yu Jiang

    Decentralized integration of distributed generation (DG) units and loads are increasing in the modern distribution grid. Maintaining the power flow and power quality within their accepted limits is a challenging task. This article proposes a medium-voltage dc (MVDC) interconnection system based on the single-stage multiport solid-state transformers (SST). First, the single-stage multiport SST’s coordinated control strategies and energy management method are discussed, aiming at the flexible power flow control between the utility grid, MVDC grid, and the low-voltage ac/dc microgrid. Second, the MVDC controller parameters and SST passive components are optimized based on the impedance interaction characteristics between the two SSTs’ MVDC ports, thereby enhancing the stability margin of the interconnected system. Then, the operation modes of the interconnected system are defined. Finally, the effectiveness of the proposed operation modes and control strategy is verified through a 1-MW simulation platform, while a 1-kW scaled-down experimental prototype is built to further validate the single-stage multiport SST and the MVDC interconnected system.


  • A Dynamic Response Enhanced Model Predictive Control for Bidirectional Dual Active Bridge Converter

    by Heyang Sun, Dehao Kong, Chao Liu, Chuang Liu, Zhongchen Pei, Di Zhu, Jingyue Wang

    Model Predictive Control (MPC) can enhance the dynamic response performance of Dual Active Bridge (DAB) converters, but its strong dependency on model parameters leads to poor system robustness. To address this issue, this paper proposes an ultra-local model based MPC (ULM-MPC) strategy This method establishes a ULM that retains only accurately measurable parameters, categorizes all remaining uncertain parameters as a lumped disturbance, and calculates the lumped disturbance in real-time using parameter identification techniques. Without altering the original control structure, this method eliminates control accuracy degradation caused by model parameter inaccuracies, thereby improving system robustness. Furthermore, building upon dual-phase-shift modulation, the Lagrange multiplier method (LMM) is employed to solve optimal modulation parameters, achieving current stress optimization and enhancing steady-state operational efficiency. Finally, experimental verification is conducted to validate the effectiveness and superiority of the proposed method.


  • Model-Free Predictive Control of Dual-Active-Bridge Converter Based on Sliding-Mode Observer Considering Parameters’ Uncertainty

    by Heyang Sun, Dehao Kong, Chuang Liu, Di Zhu, Jingyue Wang, Yu Jiang, Zhongchen Pei

    The strong parameter dependency of model predictive control (MPC), despite its capability to enhance dynamic performance in dual-active-bridge (DAB) converters, remains a critical limitation. To overcome the parameters’ uncertainty of DAB, this paper proposes a model-free predictive control (MFPC) method integrated with a sliding mode observer (SMO). First, to enhance the steady-state efficiency of the DAB converter, optimization strategies for natural zero-voltage switching (ZVS) and full ZVS are proposed under the constraint of minimum current stress. A comprehensive analysis of the advantages and disadvantages of both methods is conducted, and the most efficiency-optimal approach is selected based on experimental results. Second, an ultra-local model of the DAB converter is established, which innovatively consolidates all uncertainties into a unified lumped disturbance. A full-order SMO is employed to estimate the lumped disturbance in real time, replacing traditional parameter identification techniques. This reduces computational burden while enhancing system robustness. Finally, experimental comparisons with other schemes validate the effectiveness and superiority of the proposed method.


  • Single-Stage Isolated PV-Battery-Hybrid (PVBH) Cascaded Grid-Connected System Based on Multiplexing Converter

    by Jingyue Wang, Di Zhu, Chuang Liu, Zhongchen Pei, Heyang Sun, Chao Liu

    The photovoltaic-battery-hybrid (PVBH) cascaded converter has become an attractive energy integration scheme, which has the advantages of modularity, module-level maximum power point tracking (MPPT) operation, output power without fluctuation components, and so on. However, during the heavy-load demand period at night, the PVBH cascaded converter is idle due to no photovoltaic (PV) power input, resulting in low utilization of the converter. This article proposes a PVBH cascaded grid-connected system by multiplexing converter in its idle state. The proposed system can flexibly be switched to an energy storage (ES) power station that provides active frequency and voltage support for the power grid without additional ES converters, thus improving the asset utilization of the distribution network. First, the structure of the proposed system and the working principles of its cascaded submodules are introduced. Then, the operation mode selection conditions between “PVBH grid-connected mode” and “ES power station mode” of the system are given. Additionally, the corresponding control strategies are designed for the two operation modes of the system. Finally, the effectiveness of the proposed control strategies is verified through a 10-kV/3-MW full-power simulation platform, and a 150-V/1-kW scaled-down experimental prototype is built to further demonstrate the correctness of the proposed system.


  • Optimization of Current RMS Modulation Strategy for DAB Converters Based on Vector Analysis

    by Qiao Wang, Heyang Sun, Xin Wang

    In order to improve the efficiency of Dual Active Bridge (DAB) converters and simplify the complex time-domain analysis process of DAB converters, the article proposes a modulation strategy with minimum current root mean square (RMS) using vector analysis method. The analytical expression of the DAB converter was derived, and the modulation strategy with the current RMS as the optimization objective was intuitively derived using vector analysis by extracting the fundamental component. Compared with the modulation strategy under the traditional time-domain analysis, it does not need to solve the equation of state of each period in the switching cycle, which greatly simplifies the analysis process of the DAB converter. Especially in light load situations, this strategy can effectively reduce the inductance current and improve the transmission efficiency of the converter. Finally, an experimental platform was built to verify the effectiveness of the optimized modulation strategy proposed in this paper. (Abstract)

  • Open Access

    Isotopic characteristics and sources of organic carbon in suspended particulates and sediments in Lake Wuliangsuhai

    by Geng Yue, Lv Xixi, Yu Ruihong, Sun Heyang, Liu Xinyu, Cao Zhengxu, Li Xiangwei, Zhu Penghang, Ge Zheng