Benyam Dejen
Benyam Dejen has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Christopher J. Chunnilall
National Physical Laboratory, Teddington, U.K.
2 shared publications - Luke Arabskyj
National Physical Laboratory 1 , Hampton Road, Teddington TW11 0LW
2 shared publications - Philip R. Dolan
National Physical Laboratory
2 shared publications - Ted Silva Santana
National Physical Laboratory 1 , Hampton Road, Teddington TW11 0LW
2 shared publications - A. Vaquero-Stainer
National Physical Laboratory 1 , Hampton Road, Teddington TW11 0LW
1 shared publication - Ahmed M. Hassanen
Cavendish Laboratory, University of Cambridge, Cambridge, United Kingdom
1 shared publication
Latest Publications
- Open Access
- 24 June 2026
- Published by Springer Nature in Nature Communications
Coherent control of quantum-dot spins with cyclic optical transitions
Solid-state spins are promising as interfaces from stationary qubits to single photons for quantum communication technologies. Semiconductor quantum dots have excellent optical coherence, exhibit near-unity collection efficiencies when coupled to photonic structures, and possess long-lived spins for quantum memory. However, the incompatibility of performing optical spin control and single-shot readout simultaneously has been a challenge faced by almost all solid-state emitters. To overcome this, we leverage light-hole mixing to realize a highly asymmetric lambda system in a negatively charged heavy-hole exciton in Faraday configuration. By compensating GHz-scale differential Stark shifts, induced by unequal coupling to Raman control fields, and by performing nuclear-spin cooling, we achieve quantum control of an electron-spin qubit with a π -pulse contrast of 97.4% while preserving spin-selective optical transitions with a cyclicity of 471 (50). We demonstrate this scheme for both GaAs and InGaAs quantum dots, and show that it is compatible with the operation of a nuclear quantum memory. Our approach thus enables repeated emission of indistinguishable photons together with qubit control, as required for single-shot readout, photonic cluster-state generation, and quantum repeater technologies.
- 24 June 2026
- Published by Springer Nature in Nature Communications
Open AccessCoherent control of quantum-dot spins with cyclic optical transitions
Solid-state spins are promising as interfaces from stationary qubits to single photons for quantum communication technologies. Semiconductor quantum dots have excellent optical coherence, exhibit near-unity collection efficiencies when coupled to photonic structures, and possess long-lived spins for quantum memory. However, the incompatibility of performing optical spin control and single-shot readout simultaneously has been a challenge faced by almost all solid-state emitters. To overcome this, we leverage light-hole mixing to realize a highly asymmetric lambda system in a negatively charged heavy-hole exciton in Faraday configuration. By compensating GHz-scale differential Stark shifts, induced by unequal coupling to Raman control fields, and by performing nuclear-spin cooling, we achieve quantum control of an electron-spin qubit with a π -pulse contrast of 97.4% while preserving spin-selective optical transitions with a cyclicity of 471 (50). We demonstrate this scheme for both GaAs and InGaAs quantum dots, and show that it is compatible with the operation of a nuclear quantum memory. Our approach thus enables repeated emission of indistinguishable photons together with qubit control, as required for single-shot readout, photonic cluster-state generation, and quantum repeater technologies.
- Open Access
- 4 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (19)
Interference effects in commercially available free-space silicon single-photon avalanche diodes
Single-photon avalanche diodes (SPADs) are essential for photon-based measurements and metrology, enabling measurement comparisons at the few-photon level and facilitating global traceability to the SI. A spatially uniform detector response is crucial for these applications. Here, we report on interference effects in commercially available silicon SPADs that are detrimental to their spatial uniformity. Contrasts as high as 18% are observed, posing problems for metrology and general applications that utilize coherent light and require stable detection efficiencies. We eliminate the device optical window as a contributing interface, isolating likely causes to anti-reflective coatings, the semiconductor surface, and the SPAD's internal structure. We also present results where we leverage this sub-optimal behavior by aligning an incident beam with the position of maximum constructive interference, yielding an effective detection efficiency of 51.1(1.7)% compared to the normal value of 44.3(1)% obtained with the interference suppressed. We anticipate that this work will significantly impact the continuing development of these devices, the methods for characterizing them, and their use in accurate measurements.
- 4 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (19)
Open AccessInterference effects in commercially available free-space silicon single-photon avalanche diodes
Single-photon avalanche diodes (SPADs) are essential for photon-based measurements and metrology, enabling measurement comparisons at the few-photon level and facilitating global traceability to the SI. A spatially uniform detector response is crucial for these applications. Here, we report on interference effects in commercially available silicon SPADs that are detrimental to their spatial uniformity. Contrasts as high as 18% are observed, posing problems for metrology and general applications that utilize coherent light and require stable detection efficiencies. We eliminate the device optical window as a contributing interface, isolating likely causes to anti-reflective coatings, the semiconductor surface, and the SPAD's internal structure. We also present results where we leverage this sub-optimal behavior by aligning an incident beam with the position of maximum constructive interference, yielding an effective detection efficiency of 51.1(1.7)% compared to the normal value of 44.3(1)% obtained with the interference suppressed. We anticipate that this work will significantly impact the continuing development of these devices, the methods for characterizing them, and their use in accurate measurements.
- Open Access
- 4 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (19)
A refined method for characterizing afterpulse probability in single-photon avalanche diodes
Single-photon avalanche diodes (SPADs) are critical components in low-light-level sensing and photonic quantum information applications. For these, it is often necessary that a full characterization of the SPAD is performed, for which a key metric is the afterpulse probability. This study provides a detailed comparison of the common synchronized and non-synchronized methods used to measure afterpulse probability. Measurements on a single SPAD reveal inconsistencies between the afterpulse probabilities obtained by the two methods. By re-deriving the equations from first principles, the discrepancy is traced to the analysis approach for the non-synchronized experiment. An improved analysis approach is presented, leading to better agreement between the non-synchronized and synchronized methods. The study also provides guidance on the experimental conditions required for the valid application of both methods, along with a detailed analysis of the limitations of the non-synchronized method under high photon flux. These findings offer a more accurate approach for characterizing afterpulse probability and for reconciling the results of two methods, which enables better quantification of SPAD performance.
- 4 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (19)
Open AccessA refined method for characterizing afterpulse probability in single-photon avalanche diodes
Single-photon avalanche diodes (SPADs) are critical components in low-light-level sensing and photonic quantum information applications. For these, it is often necessary that a full characterization of the SPAD is performed, for which a key metric is the afterpulse probability. This study provides a detailed comparison of the common synchronized and non-synchronized methods used to measure afterpulse probability. Measurements on a single SPAD reveal inconsistencies between the afterpulse probabilities obtained by the two methods. By re-deriving the equations from first principles, the discrepancy is traced to the analysis approach for the non-synchronized experiment. An improved analysis approach is presented, leading to better agreement between the non-synchronized and synchronized methods. The study also provides guidance on the experimental conditions required for the valid application of both methods, along with a detailed analysis of the limitations of the non-synchronized method under high photon flux. These findings offer a more accurate approach for characterizing afterpulse probability and for reconciling the results of two methods, which enables better quantification of SPAD performance.