Vitalii Shein
Vitalii Shein has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Mikhail Podrigalo
National Academy of the National Guard of Ukraine
5 shared publications - Mykhailo Kholodov
Kharkiv National Automobile and Highway University
2 shared publications - Mykhailo Podryhalo
Kharkiv National Automobile and Highway University
2 shared publications Oleksii Kasianenko
2 shared publications- Ruslan Kaidalov
National Academy of the National Guard of Ukraine
2 shared publications - Stanislav Horielyshev
National Academy of the National Guard of Ukraine
2 shared publications
Latest Publications
- 7 February 2026
- Published by Springer Nature
- p. 92-99
Model of Multicomponent Complex Motion as a Basis for Controlling a Group of Unmanned Platforms
- 7 February 2026
- Published by Springer Nature
- p. 92-99
Model of Multicomponent Complex Motion as a Basis for Controlling a Group of Unmanned Platforms
- 4 December 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (12(43))
Using Scale Modeling to Assess the Accuracy of Measuring Parameters of Vehicles and Engines under Non-Standard Conditions
Mykhailo Podryhalo, Professor, Doctor of Science, head of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1624-5219, e-mail: pmikhab@gmail.com Anatolii Uzhva, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Automobiles Department by A. B. Hredeskul, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1615-8019, e-mail: uzhva_av@ukr.net Vitalii Shein, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-9282-0190, e-mail: sheinvskhadi@gmail.com The production of mobile technology, particularly automobiles or engines, is impossible without conducting tests on experimental samples. However, significant resource costs, notably time, for producing one natural experimental sample and conducting its tests affect both the cost price of the future series and the speed of putting the series into production. In view of this, testing of large-scale physical models was and remains relevant. The aim of the research is to determine the requirements for the accuracy of measuring physical quantities in non-standard tests of automobiles and engines by using similarity theory through the construction of scale coefficients. The approaches adopted in the work to achieve this goal are based on methods of similarity theory, measurement methods and principles, and the theory of measurement errors. The study found that transitioning from external to partial speed characteristics when conducting engine tests should be accompanied by increased accuracy in measuring effective power and torque. In this regard, the measurement error of the crankshaft angular velocity may be increased. It was also determined that during forced tests of automobiles, engines, and their components, as the acceleration coefficient increases, the maximum permissible measurement error of the measured parameter should decrease. It was established that during tests of high-speed automobiles, as the maximum speed increases, the minimum permissible measurement error of physical quantities may be increased. The research has been conducted on the required accuracy of measuring physical quantities for cases of testing internal combustion engines on partial speed characteristics, for accelerated reliability tests of automobiles, and for dynamic testing of high-speed automobiles. The obtained results can be recommended for testing engines on partial speed characteristics, for accelerated reliability tests of automobiles and their components, and for testing high-speed automobiles.
- 4 December 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (12(43))
Using Scale Modeling to Assess the Accuracy of Measuring Parameters of Vehicles and Engines under Non-Standard Conditions
Mykhailo Podryhalo, Professor, Doctor of Science, head of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1624-5219, e-mail: pmikhab@gmail.com Anatolii Uzhva, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Automobiles Department by A. B. Hredeskul, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-1615-8019, e-mail: uzhva_av@ukr.net Vitalii Shein, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of Technology of Machinery Manufacturing and Machine Maintenance Department, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, ORCID: https://orcid.org/0000-0002-9282-0190, e-mail: sheinvskhadi@gmail.com The production of mobile technology, particularly automobiles or engines, is impossible without conducting tests on experimental samples. However, significant resource costs, notably time, for producing one natural experimental sample and conducting its tests affect both the cost price of the future series and the speed of putting the series into production. In view of this, testing of large-scale physical models was and remains relevant. The aim of the research is to determine the requirements for the accuracy of measuring physical quantities in non-standard tests of automobiles and engines by using similarity theory through the construction of scale coefficients. The approaches adopted in the work to achieve this goal are based on methods of similarity theory, measurement methods and principles, and the theory of measurement errors. The study found that transitioning from external to partial speed characteristics when conducting engine tests should be accompanied by increased accuracy in measuring effective power and torque. In this regard, the measurement error of the crankshaft angular velocity may be increased. It was also determined that during forced tests of automobiles, engines, and their components, as the acceleration coefficient increases, the maximum permissible measurement error of the measured parameter should decrease. It was established that during tests of high-speed automobiles, as the maximum speed increases, the minimum permissible measurement error of physical quantities may be increased. The research has been conducted on the required accuracy of measuring physical quantities for cases of testing internal combustion engines on partial speed characteristics, for accelerated reliability tests of automobiles, and for dynamic testing of high-speed automobiles. The obtained results can be recommended for testing engines on partial speed characteristics, for accelerated reliability tests of automobiles and their components, and for testing high-speed automobiles.
- 1 January 2025
- Published by Odesa Military Academy in Collection of scientific works of Odesa Military Academy
- Vol. 24 (2)
DETERMINATION OF THE RELATIONSHIP BETWEEN THE MAIN PARAMETERS OF AUTOMOBILES AT THE STAGE OF PRELIMINARY DESIGN
DETERMINATION OF THE RELATIONSHIP BETWEEN THE MAIN PARAMETERS OF AUTOMOBILES AT THE STAGE OF PRELIMINARY DESIGN M. Podrigalo, A. Nikorchuk, V. Shein The study focuses on improving methods for assessing the technical level of passenger cars at the preliminary design stage by identifying the relationships between vehicle mass, maximum speed, and effective engine power. Based on the analysis of existing research, it is shown that the traditional indicator of specific power does not provide an objective comparison of vehicles from different classes, as it ignores the scaling characteristics of vehicle design. To overcome this limitation, the study introduces the parameter of energy load level, which expresses the ratio between the maximum effective engine power and the maximum possible kinetic energy of the vehicle at a given mass and speed. Analytical relationships are derived for the scaling coefficients of mass, speed, power, and energy load, enabling the influence of the scaling factor on vehicle energy characteristics to be taken into account. A corrected indicator of energy load level that incorporates scaling, as well as a corresponding criterion of energy efficiency, is proposed. These indicators allow for a more differentiated assessment of vehicles with different sizes and production years. In addition, a new energetic criterion – partial acceleration from driving force – is introduced, defined as the ratio of maximum effective engine power to the product of vehicle mass and its maximum speed. The analysis of modern car models across various classes demonstrates that the value of partial acceleration increases consistently from class A to class F, reflecting a growth in vehicle energy potential. The obtained relationships can be applied to refine the methods of preliminary vehicle design and to provide a comprehensive evaluation of energy efficiency for vehicles of different designs and configurations. Keywords: energy efficiency, scaling coefficient, energy load level, partial acceleration, dynamic properties.
- 1 January 2025
- Published by Odesa Military Academy in Collection of scientific works of Odesa Military Academy
- Vol. 24 (2)
DETERMINATION OF THE RELATIONSHIP BETWEEN THE MAIN PARAMETERS OF AUTOMOBILES AT THE STAGE OF PRELIMINARY DESIGN
DETERMINATION OF THE RELATIONSHIP BETWEEN THE MAIN PARAMETERS OF AUTOMOBILES AT THE STAGE OF PRELIMINARY DESIGN M. Podrigalo, A. Nikorchuk, V. Shein The study focuses on improving methods for assessing the technical level of passenger cars at the preliminary design stage by identifying the relationships between vehicle mass, maximum speed, and effective engine power. Based on the analysis of existing research, it is shown that the traditional indicator of specific power does not provide an objective comparison of vehicles from different classes, as it ignores the scaling characteristics of vehicle design. To overcome this limitation, the study introduces the parameter of energy load level, which expresses the ratio between the maximum effective engine power and the maximum possible kinetic energy of the vehicle at a given mass and speed. Analytical relationships are derived for the scaling coefficients of mass, speed, power, and energy load, enabling the influence of the scaling factor on vehicle energy characteristics to be taken into account. A corrected indicator of energy load level that incorporates scaling, as well as a corresponding criterion of energy efficiency, is proposed. These indicators allow for a more differentiated assessment of vehicles with different sizes and production years. In addition, a new energetic criterion – partial acceleration from driving force – is introduced, defined as the ratio of maximum effective engine power to the product of vehicle mass and its maximum speed. The analysis of modern car models across various classes demonstrates that the value of partial acceleration increases consistently from class A to class F, reflecting a growth in vehicle energy potential. The obtained relationships can be applied to refine the methods of preliminary vehicle design and to provide a comprehensive evaluation of energy efficiency for vehicles of different designs and configurations. Keywords: energy efficiency, scaling coefficient, energy load level, partial acceleration, dynamic properties.
- Open Access
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 5-11
Application of the partial accelerations method in large-scale modeling of mechanical systems
Problem. Modern trends in the design of mechanical systems require the application of efficient methods to reduce time and resource expenditures during the development and testing of new structures. Large-scale modeling serves as a critical tool for verifying theoretical principles, evaluating the safety, and assessing the functionality of mechanical systems at early design stages. However, the complexity of dynamic models that describe the behavior of mobile machines in a scaled format necessitates the development of approaches to simplify such models. One promising approach is the method of partial accelerations, which enables mathematical and computational optimization of modeling processes. Purpose. The purpose of this study is to improve large-scale modeling methods by employing the method of partial accelerations in the study of mobile machine dynamics. Methodology. The research is based on the principle of superposition in mechanics, which enables the replacement of classical dynamic equations with equations of partial accelerations in a homogeneous vector space. This approach significantly simplifies the mathematical representation of system dynamics. Results. It has been established that the acceleration scale for mechanical systems operating within Earth’s gravitational field is always equal to unity, simplifying the process of determining the scaling factors for other physical quantities. The study proposes equations for partial accelerations that provide an accurate representation of the kinematics of both prototype and scaled models of mobile machines. Furthermore, the application of the multi-component complex motion model demonstrated its ability to evaluate dynamic deviations in mobile machines and account for the effects of active and reactive forces. Originality. The proposed method of partial accelerations introduces a novel approach to large-scale modeling of mechanical systems. By operating within a homogeneous vector space of accelerations, this method eliminates the need for inertial forces, reducing the complexity of mathematical models and enhancing the accuracy of predicting system dynamic behavior. Practical meaning. The method of partial accelerations can be applied in the following areas: designing mobile machines, including vehicles and planetary rovers; optimizing dynamic tests using accelerometers; modeling the energy efficiency of vehicles under steady and unsteady motion; enhancing scaled models for safety and maneuverability analyses
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 5-11
Open AccessApplication of the partial accelerations method in large-scale modeling of mechanical systems
Problem. Modern trends in the design of mechanical systems require the application of efficient methods to reduce time and resource expenditures during the development and testing of new structures. Large-scale modeling serves as a critical tool for verifying theoretical principles, evaluating the safety, and assessing the functionality of mechanical systems at early design stages. However, the complexity of dynamic models that describe the behavior of mobile machines in a scaled format necessitates the development of approaches to simplify such models. One promising approach is the method of partial accelerations, which enables mathematical and computational optimization of modeling processes. Purpose. The purpose of this study is to improve large-scale modeling methods by employing the method of partial accelerations in the study of mobile machine dynamics. Methodology. The research is based on the principle of superposition in mechanics, which enables the replacement of classical dynamic equations with equations of partial accelerations in a homogeneous vector space. This approach significantly simplifies the mathematical representation of system dynamics. Results. It has been established that the acceleration scale for mechanical systems operating within Earth’s gravitational field is always equal to unity, simplifying the process of determining the scaling factors for other physical quantities. The study proposes equations for partial accelerations that provide an accurate representation of the kinematics of both prototype and scaled models of mobile machines. Furthermore, the application of the multi-component complex motion model demonstrated its ability to evaluate dynamic deviations in mobile machines and account for the effects of active and reactive forces. Originality. The proposed method of partial accelerations introduces a novel approach to large-scale modeling of mechanical systems. By operating within a homogeneous vector space of accelerations, this method eliminates the need for inertial forces, reducing the complexity of mathematical models and enhancing the accuracy of predicting system dynamic behavior. Practical meaning. The method of partial accelerations can be applied in the following areas: designing mobile machines, including vehicles and planetary rovers; optimizing dynamic tests using accelerometers; modeling the energy efficiency of vehicles under steady and unsteady motion; enhancing scaled models for safety and maneuverability analyses
- 8 July 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(3),p. 19-24
THE SCALE SIMULATION APPLICATION IN THE MILITARY VEHICLES ARMORING
The armoring of the civilian vehicles during martial law requires the search for new parameters selecting methods that provide the required indicators of dynamic properties. The additional armored sheets installation on ordinary civilian vehicles leads to the weight increase, the center of mass position change and dynamic properties deterioration. Therefore, the ordinary civilian vehicles armoring can also be considered from the perspective of large-scale modeling. One of the ways to ensure the necessary dynamic indicators of the ordinary civilian vehicles when armoring is to use the theory of large-scale modeling due to the use of the mass scale as the main scale. In the study, using the theory of similarity, a system of scale coefficients was developed for choosing the main design parameters of armored vehicles. The dependences of engine power, wheel diameter and rigid suspension and tires, engine and transmission torques on the car reservation coefficient are obtained. The value of the indicator of the relevant parameters of the vehicle degree is given. The higher the degree indicator, the higher the sensitivity of the vehicle parameter to increase when armoring. It was determined that different physical (mechanical) quantities have different sensitivity to the increase in the weight of the vehicle. The greatest sensitivity is the value of the engine torque, and the least is the linear dimension. These dependencies can be used in the process of designing a car armoring. In addition, it was determined that there is a relationship between the maximum permissible parameter measurement error during dynamic tests of full-scale models and the maximum permissible parameter measurement error during full-scale machine testing. Іmproved requirements for the dynamic parameters measurement accuracy during armored vehicles tests are considered. During armored vehicles tests, the maximum permissible error of dynamic parameters measuring increases, which makes it possible not to use more complex measuring and recording equipment.
- 8 July 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(3),p. 19-24
THE SCALE SIMULATION APPLICATION IN THE MILITARY VEHICLES ARMORING
The armoring of the civilian vehicles during martial law requires the search for new parameters selecting methods that provide the required indicators of dynamic properties. The additional armored sheets installation on ordinary civilian vehicles leads to the weight increase, the center of mass position change and dynamic properties deterioration. Therefore, the ordinary civilian vehicles armoring can also be considered from the perspective of large-scale modeling. One of the ways to ensure the necessary dynamic indicators of the ordinary civilian vehicles when armoring is to use the theory of large-scale modeling due to the use of the mass scale as the main scale. In the study, using the theory of similarity, a system of scale coefficients was developed for choosing the main design parameters of armored vehicles. The dependences of engine power, wheel diameter and rigid suspension and tires, engine and transmission torques on the car reservation coefficient are obtained. The value of the indicator of the relevant parameters of the vehicle degree is given. The higher the degree indicator, the higher the sensitivity of the vehicle parameter to increase when armoring. It was determined that different physical (mechanical) quantities have different sensitivity to the increase in the weight of the vehicle. The greatest sensitivity is the value of the engine torque, and the least is the linear dimension. These dependencies can be used in the process of designing a car armoring. In addition, it was determined that there is a relationship between the maximum permissible parameter measurement error during dynamic tests of full-scale models and the maximum permissible parameter measurement error during full-scale machine testing. Іmproved requirements for the dynamic parameters measurement accuracy during armored vehicles tests are considered. During armored vehicles tests, the maximum permissible error of dynamic parameters measuring increases, which makes it possible not to use more complex measuring and recording equipment.
- 1 January 2024
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- Vol. 1 (34(48)) , 10-18
USING THE PRINCIPLES OF KINEMODYNAMICS FOR TRACTION TESTS OF MOBILE MACHINES
The study aims to develop a method for traction testing of mobile machines using the principles of kinemodynamics. To achieve these goals, it is necessary to: justify the method of traction testing of mobile machines using the principles of kinemodynamics; and carry out experimental validation of the proposed test method. Methods and materials. The methodological basis of the work is the principles of kinemodynamics, namely partial accelerations. The development of a test method consists of determining the possibility of measuring the established indicators and assessing the method’s suitability. To determine the power and energy characteristics of mobile machines, it is proposed to use a measuring complex consisting of a linear accelerometer and special software for processing the measured data. Results. A method for traction testing of mobile machines using the principles of kinemodynamics has been developed; experimental validation of the proposed test method was carried out. The essence of the method is the direct measurement of longitudinal accelerations that occur during the acceleration of a car and the subsequent processing of the results of these measurements, using an energy approach based on determining the change (difference) in the kinetic energy of the car over a certain period. This made it possible to determine the force on the wheels of the car, which leads to its acceleration (or maintaining uniformly accelerated motion) and the share of engine power spent on this car. An experimental validation of the developed method was carried out, which consisted of determining the coefficient of agreement of test results with variations in certain specific factors. Conclusions. The use of the principles of kinemodynamics allows us to determine the fraction of force that leads to acceleration during the acceleration of the car and the fraction of engine power expended. Based on the test results obtained by the proposed method, the following analysis can be made: determine the conditions (gear ratio in the gearbox) under which maximum acceleration is possible, determining the share of the maximum possible design force in each gear used to accelerate the machine; determine the weighted average power reserve of the machine engine, which can be used to overcome additional interference. Experimental validation of the proposed method in terms of agreement showed satisfactory results. Keywords: traction tests, method, coincidence coefficient, power, traction force, acceleration.
- 1 January 2024
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- Vol. 1 (34(48)) , 10-18
USING THE PRINCIPLES OF KINEMODYNAMICS FOR TRACTION TESTS OF MOBILE MACHINES
The study aims to develop a method for traction testing of mobile machines using the principles of kinemodynamics. To achieve these goals, it is necessary to: justify the method of traction testing of mobile machines using the principles of kinemodynamics; and carry out experimental validation of the proposed test method. Methods and materials. The methodological basis of the work is the principles of kinemodynamics, namely partial accelerations. The development of a test method consists of determining the possibility of measuring the established indicators and assessing the method’s suitability. To determine the power and energy characteristics of mobile machines, it is proposed to use a measuring complex consisting of a linear accelerometer and special software for processing the measured data. Results. A method for traction testing of mobile machines using the principles of kinemodynamics has been developed; experimental validation of the proposed test method was carried out. The essence of the method is the direct measurement of longitudinal accelerations that occur during the acceleration of a car and the subsequent processing of the results of these measurements, using an energy approach based on determining the change (difference) in the kinetic energy of the car over a certain period. This made it possible to determine the force on the wheels of the car, which leads to its acceleration (or maintaining uniformly accelerated motion) and the share of engine power spent on this car. An experimental validation of the developed method was carried out, which consisted of determining the coefficient of agreement of test results with variations in certain specific factors. Conclusions. The use of the principles of kinemodynamics allows us to determine the fraction of force that leads to acceleration during the acceleration of the car and the fraction of engine power expended. Based on the test results obtained by the proposed method, the following analysis can be made: determine the conditions (gear ratio in the gearbox) under which maximum acceleration is possible, determining the share of the maximum possible design force in each gear used to accelerate the machine; determine the weighted average power reserve of the machine engine, which can be used to overcome additional interference. Experimental validation of the proposed method in terms of agreement showed satisfactory results. Keywords: traction tests, method, coincidence coefficient, power, traction force, acceleration.
- Open Access
- 29 December 2022
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 51,p. 26-34
Assessment of increased energy efficiency of vehicles with a rational reduction of engine capacity
Problem. The tendency to reduce the working volume of internal combustion engines, which has emerged in recent years in the global automotive industry, is due to the need to improve the environmental situation and energy efficiency of road transport. Goal. The aim of the study is to increase the energy efficiency of vehicles by rationally reducing the maximum effective engine capacity. Methodology. The work uses the method of partial accelerations, implemented in a mobile registration and measurement complex, which allowed the authors to obtain an improved formula for calculating the force of aerodynamic resistance. Experimental studies of car aerodynamics were also carried out. Results. The article presents the results of the authors' research, which made it possible to prove the possibility of reducing the power of the internal combustion engine while maintaining the specified maximum speed and the specified level of indicators of the dynamic properties of cars. Originality. The relationship between the degree of use of the maximum engine power and the relative change in the effective specific fuel consumption of a carburetor gasoline engine with direct injection of gasoline and diesel is determined. Practical value. Calculations performed on the example of the ZAZ-1103 "Slavuta" car showed that a rational reduction in effective power allows for a 9.5% reduction in fuel consumption, and for an engine with direct injection of gasoline and diesel engines, this leads to an increase in fuel consumption by 6.7 % and 20.3%, respectively.
- 29 December 2022
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 51,p. 26-34
Open AccessAssessment of increased energy efficiency of vehicles with a rational reduction of engine capacity
Problem. The tendency to reduce the working volume of internal combustion engines, which has emerged in recent years in the global automotive industry, is due to the need to improve the environmental situation and energy efficiency of road transport. Goal. The aim of the study is to increase the energy efficiency of vehicles by rationally reducing the maximum effective engine capacity. Methodology. The work uses the method of partial accelerations, implemented in a mobile registration and measurement complex, which allowed the authors to obtain an improved formula for calculating the force of aerodynamic resistance. Experimental studies of car aerodynamics were also carried out. Results. The article presents the results of the authors' research, which made it possible to prove the possibility of reducing the power of the internal combustion engine while maintaining the specified maximum speed and the specified level of indicators of the dynamic properties of cars. Originality. The relationship between the degree of use of the maximum engine power and the relative change in the effective specific fuel consumption of a carburetor gasoline engine with direct injection of gasoline and diesel is determined. Practical value. Calculations performed on the example of the ZAZ-1103 "Slavuta" car showed that a rational reduction in effective power allows for a 9.5% reduction in fuel consumption, and for an engine with direct injection of gasoline and diesel engines, this leads to an increase in fuel consumption by 6.7 % and 20.3%, respectively.
- 21 June 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 2,p. 79-90
METHOD FOR PREDICTION OF DURABILITY OF FRICTION LININGS OF TRACTOR BRAKES
The paper presents the results of a research on the creation of a methodology for predicting the durability of friction linings of tractor brake mechanisms at the design stage. Not only an increase in engine power and tractor weight is taken into account, but also the installation of more advanced brake mechanisms. Thanks to the developed method for predicting the durability of the friction linings of tractor brake mechanisms, the use of unified disc brakes is justified. To solve the problem, the similarity theory was used, in which the most intense loading mode of the tractor brake mechanisms was modeled. As an indicator, the maximum work performed by the brakes until the friction linings are completely worn out was used. The results of estimating the resource of the friction linings of the tractor brake mechanisms under the most intense loading conditions were compared with the results of the calculation under the actual loading conditions.
- 21 June 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 2,p. 79-90
METHOD FOR PREDICTION OF DURABILITY OF FRICTION LININGS OF TRACTOR BRAKES
The paper presents the results of a research on the creation of a methodology for predicting the durability of friction linings of tractor brake mechanisms at the design stage. Not only an increase in engine power and tractor weight is taken into account, but also the installation of more advanced brake mechanisms. Thanks to the developed method for predicting the durability of the friction linings of tractor brake mechanisms, the use of unified disc brakes is justified. To solve the problem, the similarity theory was used, in which the most intense loading mode of the tractor brake mechanisms was modeled. As an indicator, the maximum work performed by the brakes until the friction linings are completely worn out was used. The results of estimating the resource of the friction linings of the tractor brake mechanisms under the most intense loading conditions were compared with the results of the calculation under the actual loading conditions.
- Open Access
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 36-44
Improvement evaluation methodology of vehicle load and energy efficiency
Анотація Проблема. Виникла необхідність розширити відому концепцію експлуатаційних властивостей автомобіля - економічність палива виникла у зв'язку з появою нових альтернативних електростанцій (електродвигуни, маховики, гібридні електростанції тощо), що вимагає включення не тільки теплову енергію палива, але й інші види енергії (електричну та механічну). У статті проведено дослідження вибору та обґрунтування показників енергоефективності автомобіля шляхом оцінки витрат енергії двигуна на його рух. Було проведено аналіз взаємозв’язку між енергетичними характеристиками динаміки та ефективністю автомобіля. Мета. Метою дослідження є аналіз методів оцінки енергоефективності транспортного засобу. Для досягнення цієї мети необхідно визначити показники, які дозволять проводити порівняльний аналіз показників енергоефективності різних транспортних засобів. Методологія. Підходи, прийняті в роботі для вирішення цієї мети, ґрунтуються на обґрунтуванні показників енергоефективності автомобіля шляхом оцінки споживання енергії двигуном на його рух. Результати. На нашу думку, при проектуванні та оцінці динамічних властивостей транспортних засобів раціонально використовувати енергетичні показники транспортного засобу, для яких необхідно розробити відповідні критерії оцінки. Аналіз результатів розрахунку показників і, у таблиці 1, показав, що показник у порівнянні з має меншу дисперсію. Оригінальність. Отримані результати впливу параметрів транспортних засобів на рівень їх енергетичного навантаження показують, що показник має меншу дисперсію, ніж. Крім того, значення не корелює з роком випуску автомобіля, що дозволяє використовувати цей показник на етапі проектування транспортних засобів. Необхідно лише встановити раціональне нормативне значення цього показника. Практичне значення. Отримані результати можна рекомендувати спеціалістам для використання при проектуванні, виробництві, сертифікації та експлуатації автомобільних транспортних засобів, енергоефективності транспортних засобів, комбінованої електростанції.
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 36-44
Open AccessImprovement evaluation methodology of vehicle load and energy efficiency
Анотація Проблема. Виникла необхідність розширити відому концепцію експлуатаційних властивостей автомобіля - економічність палива виникла у зв'язку з появою нових альтернативних електростанцій (електродвигуни, маховики, гібридні електростанції тощо), що вимагає включення не тільки теплову енергію палива, але й інші види енергії (електричну та механічну). У статті проведено дослідження вибору та обґрунтування показників енергоефективності автомобіля шляхом оцінки витрат енергії двигуна на його рух. Було проведено аналіз взаємозв’язку між енергетичними характеристиками динаміки та ефективністю автомобіля. Мета. Метою дослідження є аналіз методів оцінки енергоефективності транспортного засобу. Для досягнення цієї мети необхідно визначити показники, які дозволять проводити порівняльний аналіз показників енергоефективності різних транспортних засобів. Методологія. Підходи, прийняті в роботі для вирішення цієї мети, ґрунтуються на обґрунтуванні показників енергоефективності автомобіля шляхом оцінки споживання енергії двигуном на його рух. Результати. На нашу думку, при проектуванні та оцінці динамічних властивостей транспортних засобів раціонально використовувати енергетичні показники транспортного засобу, для яких необхідно розробити відповідні критерії оцінки. Аналіз результатів розрахунку показників і, у таблиці 1, показав, що показник у порівнянні з має меншу дисперсію. Оригінальність. Отримані результати впливу параметрів транспортних засобів на рівень їх енергетичного навантаження показують, що показник має меншу дисперсію, ніж. Крім того, значення не корелює з роком випуску автомобіля, що дозволяє використовувати цей показник на етапі проектування транспортних засобів. Необхідно лише встановити раціональне нормативне значення цього показника. Практичне значення. Отримані результати можна рекомендувати спеціалістам для використання при проектуванні, виробництві, сертифікації та експлуатації автомобільних транспортних засобів, енергоефективності транспортних засобів, комбінованої електростанції.