Hasan Yildirim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hasan Yildirim has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Nilufer Ozyurt
Department of Civil Engineering, Bogazici University, Bebek, Istanbul, Turkey
3 shared publications - Onur Ozturk
Cornell University
2 shared publications - Turan Ozturan
Department of Civil Engineering, Bogazici University, Bebek, Istanbul, Turkey
2 shared publications - Hasan Dilbas
Department of Civil Engineering, Faculty of Engineering and Architecture, Kırşehir Ahi Evran University
1 shared publication - Olcay Gürabi Aydoğan
Department of Civil Engineering, Bogazici University, Istanbul 34342, Türkiye
1 shared publication - Turan Ozturan
Department of Civil Engineering, Bogazici University, Istanbul 34342, Türkiye
1 shared publication
Latest Publications
- Open Access
Valorization of Construction and Demolition Wastes and Industrial By-Products in Sustainable Concrete: Comparative Mechanical Performance of Slag Slurry-Treated Recycled Aggregate Concretes
This study investigates the valorization of construction and demolition (C&D) waste streams and an industrial by-product for sustainable concrete production. Recycled concrete aggregates (RCA) and recycled brick aggregates (RBA), derived from C&D wastes, together with pelletized recycled fly ash aggregates (FAA) produced from thermal power plant fly ash, were used as total replacements for natural coarse aggregates. Six concrete mixtures were prepared at a constant water-to-cement ratio of 0.50 using untreated and slag slurry–treated aggregates. A slag slurry-based two-stage mixing approach (TSMA), incorporating ground granulated blast furnace slag (GGBFS), was applied as a practical and potentially scalable treatment method to enhance aggregate quality and interfacial bonding. The results show that complete replacement of natural aggregates reduced fresh concrete unit weight by up to 17%, while meeting the minimum compressive strength requirements for structural applications. Slag slurry treatment led to statistically significant improvements in mechanical properties, reduced variability, and enhanced overall reliability. In addition, widely used code-based prediction models (TS500, ACI, Eurocode-2, NZS 3101-1:2006, and CSA A23.3-04), originally developed for conventional concrete, were evaluated for their applicability in estimating key mechanical properties of recycled and by-product aggregate concretes, and alternative regression-based models were developed to improve prediction accuracy. Overall, the findings demonstrate the potential for effective utilization of C&D wastes and industrial by-products in structural concrete, contributing to resource efficiency and reduced reliance on natural aggregates.
Open AccessValorization of Construction and Demolition Wastes and Industrial By-Products in Sustainable Concrete: Comparative Mechanical Performance of Slag Slurry-Treated Recycled Aggregate Concretes
This study investigates the valorization of construction and demolition (C&D) waste streams and an industrial by-product for sustainable concrete production. Recycled concrete aggregates (RCA) and recycled brick aggregates (RBA), derived from C&D wastes, together with pelletized recycled fly ash aggregates (FAA) produced from thermal power plant fly ash, were used as total replacements for natural coarse aggregates. Six concrete mixtures were prepared at a constant water-to-cement ratio of 0.50 using untreated and slag slurry–treated aggregates. A slag slurry-based two-stage mixing approach (TSMA), incorporating ground granulated blast furnace slag (GGBFS), was applied as a practical and potentially scalable treatment method to enhance aggregate quality and interfacial bonding. The results show that complete replacement of natural aggregates reduced fresh concrete unit weight by up to 17%, while meeting the minimum compressive strength requirements for structural applications. Slag slurry treatment led to statistically significant improvements in mechanical properties, reduced variability, and enhanced overall reliability. In addition, widely used code-based prediction models (TS500, ACI, Eurocode-2, NZS 3101-1:2006, and CSA A23.3-04), originally developed for conventional concrete, were evaluated for their applicability in estimating key mechanical properties of recycled and by-product aggregate concretes, and alternative regression-based models were developed to improve prediction accuracy. Overall, the findings demonstrate the potential for effective utilization of C&D wastes and industrial by-products in structural concrete, contributing to resource efficiency and reduced reliance on natural aggregates.
- 24 April 2025
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
Post-Cracking Cyclic Shear Performance of Recycled Aggregate Concrete for Pavements
Recycling construction and demolition waste is a widely used approach to enhance the sustainability of construction materials. Pavements, with their large scale, have a considerable impact on the environment during their construction and use phases. The potential of using recycled aggregates to reduce the environmental impact of concrete pavements has been discussed in several previous studies considering various aspects. However, the cyclic shear performance of concrete mixtures (one of the main parameters affecting pavement performance) produced with recycled aggregates has only been roughly discussed in a limited number of studies. To address this issue, concrete mixtures with varying recycled aggregate replacement ratios were designed and tested in this study for basic engineering properties and post-cracking cyclic shear performance. The impact of varying recycled aggregate amounts on performance parameters was assessed through experimental studies, and variations in the measured parameters are discussed. Recommendations are provided for practical applications and future research.
- 24 April 2025
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
Post-Cracking Cyclic Shear Performance of Recycled Aggregate Concrete for Pavements
Recycling construction and demolition waste is a widely used approach to enhance the sustainability of construction materials. Pavements, with their large scale, have a considerable impact on the environment during their construction and use phases. The potential of using recycled aggregates to reduce the environmental impact of concrete pavements has been discussed in several previous studies considering various aspects. However, the cyclic shear performance of concrete mixtures (one of the main parameters affecting pavement performance) produced with recycled aggregates has only been roughly discussed in a limited number of studies. To address this issue, concrete mixtures with varying recycled aggregate replacement ratios were designed and tested in this study for basic engineering properties and post-cracking cyclic shear performance. The impact of varying recycled aggregate amounts on performance parameters was assessed through experimental studies, and variations in the measured parameters are discussed. Recommendations are provided for practical applications and future research.
- 28 February 2022
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (14) , 5239-5253
Evaluation of mechanical properties and structural behaviour of concrete pavements produced with virgin and recycled aggregates: an experimental and numerical study
Due to the large-scale use of materials in highways, the sustainability of materials has attracted considerable interest for years. In this respect, significant effort has been spent investigating the use of recycled aggregates in concrete pavements. This study has been carried out to fill the gap in the structural performance of recycled aggregate concrete pavements. First, properties of concrete mixtures, produced with virgin, recycled concrete and recycled brick aggregates were experimentally measured, and the results were compared. Then, finite element analyses were done by following a novel methodology that considers the well-known previous works. Results showed that replacement of coarse aggregates with recycled aggregates decreases the mechanical properties in various amounts. Due to the resulting performances, for the same slab thickness, decreased maximum stress, increased deflection and stress ratio values were found for recycled aggregate mixtures. Additionally, higher thicknesses and material requirements were found for recycled aggregate concrete for a similar life. Despite the decreased performance and increased material requirements, the use of recycled aggregates in pavements can still be a viable alternative for countries with limited natural resources and landfills. Therefore, based on the findings, several important discussions and suggestions were presented for future works.
- 28 February 2022
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (14) , 5239-5253
Evaluation of mechanical properties and structural behaviour of concrete pavements produced with virgin and recycled aggregates: an experimental and numerical study
Due to the large-scale use of materials in highways, the sustainability of materials has attracted considerable interest for years. In this respect, significant effort has been spent investigating the use of recycled aggregates in concrete pavements. This study has been carried out to fill the gap in the structural performance of recycled aggregate concrete pavements. First, properties of concrete mixtures, produced with virgin, recycled concrete and recycled brick aggregates were experimentally measured, and the results were compared. Then, finite element analyses were done by following a novel methodology that considers the well-known previous works. Results showed that replacement of coarse aggregates with recycled aggregates decreases the mechanical properties in various amounts. Due to the resulting performances, for the same slab thickness, decreased maximum stress, increased deflection and stress ratio values were found for recycled aggregate mixtures. Additionally, higher thicknesses and material requirements were found for recycled aggregate concrete for a similar life. Despite the decreased performance and increased material requirements, the use of recycled aggregates in pavements can still be a viable alternative for countries with limited natural resources and landfills. Therefore, based on the findings, several important discussions and suggestions were presented for future works.