Skylar Deboer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Skylar Deboer has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Woongje Sung
University at Albany
4 shared publications - Adam J. Morgan
NoMIS Power Corporation
2 shared publications - Dinuth C.Y.B. Yapa Mudiyanselage
University at Albany, State University of New York
2 shared publications - Seung Yup Jang
University at Albany
2 shared publications - Stephen A. Mancini
University at Albany
2 shared publications - Aivars J. Lelis
U.S. Army Research Laboratory (ARL)
1 shared publication
Latest Publications
- Open Access
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 69-74
Impact of Active Cell Geometry on the Static Performance of 10-kV 4H-SiC JBS (Junction Barrier Schottky) Diodes
This study investigates the influence of active cell geometry on the static performance of 10-kV 4H-Silicon Carbide (SiC) Junction Barrier Schottky (JBS) diodes. Two types of diodes were fabricated and characterized, one with a hexagonal cell and the other with a stripe cell. While forward conduction characteristics were comparable, the reverse leakage current of the hexagonal cell was more than two orders of magnitude lower than that of the stripe cell at 8 kV. 3D TCAD simulations revealed that this discrepancy stems from strong electric field concentrations both at the bottom corners of the P + junctions and at the center of the Schottky contact in the stripe structure. These localized fields reduce the Schottky barrier height and enhance electron injection. In contrast, the hexagonal cell exhibited a more uniform electric field distribution in both regions, effectively suppressing leakage current. These findings underscore the critical role of active cell geometry in achieving robust reverse blocking performance in ultra-high-voltage SiC JBS diodes by clarifying the physical mechanisms contributing to leakage current behavior.
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 69-74
Open AccessImpact of Active Cell Geometry on the Static Performance of 10-kV 4H-SiC JBS (Junction Barrier Schottky) Diodes
This study investigates the influence of active cell geometry on the static performance of 10-kV 4H-Silicon Carbide (SiC) Junction Barrier Schottky (JBS) diodes. Two types of diodes were fabricated and characterized, one with a hexagonal cell and the other with a stripe cell. While forward conduction characteristics were comparable, the reverse leakage current of the hexagonal cell was more than two orders of magnitude lower than that of the stripe cell at 8 kV. 3D TCAD simulations revealed that this discrepancy stems from strong electric field concentrations both at the bottom corners of the P + junctions and at the center of the Schottky contact in the stripe structure. These localized fields reduce the Schottky barrier height and enhance electron injection. In contrast, the hexagonal cell exhibited a more uniform electric field distribution in both regions, effectively suppressing leakage current. These findings underscore the critical role of active cell geometry in achieving robust reverse blocking performance in ultra-high-voltage SiC JBS diodes by clarifying the physical mechanisms contributing to leakage current behavior.
- Open Access
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1055, 51-56
Design Optimization of 600V 4H-SiC Lateral Bi-Directional MOSFET (L-BiD-MOSFET) with 3D TCAD Simulation
This paper presents the fabrication and characterization of a cell-to-cell integrated SiC lateral bi-directional MOSFET (L-BiD-MOSFET), with blocking performance analyzed through correlation of experimental results and 3D TCAD simulations. The fabricated devices exhibit a breakdown voltage of 600 V, notably lower than the 900 V predicted by 2D simulations. To address this discrepancy, 3D TCAD simulations were performed, which identified electric field crowding at the finger edges as the dominant factor limiting the breakdown voltage. To mitigate this effect, an extended P-top edge design was introduced, which increases the simulated breakdown voltage by more than 10%. Experimental results on devices incorporating the proposed design confirm improved breakdown capability, demonstrating good agreement with simulations. These results highlight the importance of accurate 3D simulation for edge effects in lateral structures. Overall, the proposed design strategy provides valuable guidance for the development of high-performance lateral bi-directional SiC power devices.
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1055, 51-56
Open AccessDesign Optimization of 600V 4H-SiC Lateral Bi-Directional MOSFET (L-BiD-MOSFET) with 3D TCAD Simulation
This paper presents the fabrication and characterization of a cell-to-cell integrated SiC lateral bi-directional MOSFET (L-BiD-MOSFET), with blocking performance analyzed through correlation of experimental results and 3D TCAD simulations. The fabricated devices exhibit a breakdown voltage of 600 V, notably lower than the 900 V predicted by 2D simulations. To address this discrepancy, 3D TCAD simulations were performed, which identified electric field crowding at the finger edges as the dominant factor limiting the breakdown voltage. To mitigate this effect, an extended P-top edge design was introduced, which increases the simulated breakdown voltage by more than 10%. Experimental results on devices incorporating the proposed design confirm improved breakdown capability, demonstrating good agreement with simulations. These results highlight the importance of accurate 3D simulation for edge effects in lateral structures. Overall, the proposed design strategy provides valuable guidance for the development of high-performance lateral bi-directional SiC power devices.
- Open Access
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 81-88
Effect of Varying N+ Source Implantation Depth on the Electrical Characteristics of 1.2 kV 4H-SiC MOSFETs
The heavily doped N+ source region in 4H-SiC MOSFETs is a critical design parameter, as its depth and the profile strongly influence contact resistivity and conduction efficiency. This work investigates the impact of varying N+ implantation depth on the electrical performances of 1.2 kV MOSFETs in both Nominal (linear cell) and Hexagonal (HEXFET) architectures. By varying implantation energy at a fixed dose, three junction depths were obtained: 0.22 µm (shallow), 0.24 µm (moderate), and 0.27 µm (deep). Transfer Length Method (TLM) measurements revealed a significant reduction in source contact resistivity with increasing depth, from 3.91×10⁻ 5 Ω·cm² (shallow) to 1.22×10⁻ 6 Ω·cm² (deep). For Nominal MOSFET design, electrical measurements confirmed a corresponding decrease in specific on-resistance (R on,sp ), from 3.05 to 2.89 mΩ·cm². However, deeper implants introduced greater lateral straggle, shortening the effective channel length and reducing the threshold voltage (V th ) from 2.25 V to 1.96 V. The channel barrier potential lowering associated with lateral straggle increased leakage current in the blocking mode, resulting in reduced breakdown voltage (BV). For Nominal MOSFETs, BV decreased from 1610 V in the shallow split to 1470 V in the deep split, while HEXFETs exhibited sharper BV degradation due to their higher channel density. To address this limitation, optimized JFET doping was introduced, restoring the BV of the deep split to 1560 V in the Nominal architecture. These results demonstrate that although increased N+ depth improves conduction by lowering contact resistance, careful co-optimization with P-well and JFET design is necessary to suppress high leakage current during blocking mode.
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 81-88
Open AccessEffect of Varying N+ Source Implantation Depth on the Electrical Characteristics of 1.2 kV 4H-SiC MOSFETs
The heavily doped N+ source region in 4H-SiC MOSFETs is a critical design parameter, as its depth and the profile strongly influence contact resistivity and conduction efficiency. This work investigates the impact of varying N+ implantation depth on the electrical performances of 1.2 kV MOSFETs in both Nominal (linear cell) and Hexagonal (HEXFET) architectures. By varying implantation energy at a fixed dose, three junction depths were obtained: 0.22 µm (shallow), 0.24 µm (moderate), and 0.27 µm (deep). Transfer Length Method (TLM) measurements revealed a significant reduction in source contact resistivity with increasing depth, from 3.91×10⁻ 5 Ω·cm² (shallow) to 1.22×10⁻ 6 Ω·cm² (deep). For Nominal MOSFET design, electrical measurements confirmed a corresponding decrease in specific on-resistance (R on,sp ), from 3.05 to 2.89 mΩ·cm². However, deeper implants introduced greater lateral straggle, shortening the effective channel length and reducing the threshold voltage (V th ) from 2.25 V to 1.96 V. The channel barrier potential lowering associated with lateral straggle increased leakage current in the blocking mode, resulting in reduced breakdown voltage (BV). For Nominal MOSFETs, BV decreased from 1610 V in the shallow split to 1470 V in the deep split, while HEXFETs exhibited sharper BV degradation due to their higher channel density. To address this limitation, optimized JFET doping was introduced, restoring the BV of the deep split to 1560 V in the Nominal architecture. These results demonstrate that although increased N+ depth improves conduction by lowering contact resistance, careful co-optimization with P-well and JFET design is necessary to suppress high leakage current during blocking mode.
- Open Access
- 10 September 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1023, 21-27
A Novel 'Ladder' Design for Improved Channel Density for 1.2kV 4H-SiC MOSFETs
A novel topological layout was developed to enhance the channel density of 1.2kV 4H-SiC MOSFETs. The innovative "Ladder" MOSFET incorporates an additional JFET and channel region, arranged orthogonally within the layout. To ensure a fair comparison, identical design rules were applied to both the Nominal and Ladder MOSFETs, resulting in calculated channel densities of 0.30 and 0.41, respectively. Comparative analysis was conducted using Synopsys Sentaurus TCAD simulations, where three dimensional (3D) structures for both designs were generated under the same implantation and process conditions, followed by simulations of static electrical characteristics. The results indicate that the Ladder MOSFET achieved approximately 10% reduction in specific on-resistance (Ron,sp) compared to the Nominal MOSFET. Both MOSFET designs were subsequently fabricated, packaged, and evaluated, with the Ladder MOSFET demonstrating a 12.94% reduction in Ron,sp when comparing the best-performing devices from each design.
- 10 September 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1023, 21-27
Open AccessA Novel 'Ladder' Design for Improved Channel Density for 1.2kV 4H-SiC MOSFETs
A novel topological layout was developed to enhance the channel density of 1.2kV 4H-SiC MOSFETs. The innovative "Ladder" MOSFET incorporates an additional JFET and channel region, arranged orthogonally within the layout. To ensure a fair comparison, identical design rules were applied to both the Nominal and Ladder MOSFETs, resulting in calculated channel densities of 0.30 and 0.41, respectively. Comparative analysis was conducted using Synopsys Sentaurus TCAD simulations, where three dimensional (3D) structures for both designs were generated under the same implantation and process conditions, followed by simulations of static electrical characteristics. The results indicate that the Ladder MOSFET achieved approximately 10% reduction in specific on-resistance (Ron,sp) compared to the Nominal MOSFET. Both MOSFET designs were subsequently fabricated, packaged, and evaluated, with the Ladder MOSFET demonstrating a 12.94% reduction in Ron,sp when comparing the best-performing devices from each design.