Stephen A. Mancini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Stephen A. Mancini has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Woongje Sung
University at Albany
6 shared publications - Justin Lynch
University at Albany
3 shared publications - Adam J. Morgan
NoMIS Power Corporation
2 shared publications - Miguel Hinojosa
U.S. Army Research Laboratory (ARL)
2 shared publications - Seung Yup Jang
University at Albany
2 shared publications - Skylar Deboer
University at Albany
2 shared publications
Latest Publications
- Open Access
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 69-74
Impact of Active Cell Geometry on the Static Performance of 10-kV 4H-SiC JBS (Junction Barrier Schottky) Diodes
This study investigates the influence of active cell geometry on the static performance of 10-kV 4H-Silicon Carbide (SiC) Junction Barrier Schottky (JBS) diodes. Two types of diodes were fabricated and characterized, one with a hexagonal cell and the other with a stripe cell. While forward conduction characteristics were comparable, the reverse leakage current of the hexagonal cell was more than two orders of magnitude lower than that of the stripe cell at 8 kV. 3D TCAD simulations revealed that this discrepancy stems from strong electric field concentrations both at the bottom corners of the P + junctions and at the center of the Schottky contact in the stripe structure. These localized fields reduce the Schottky barrier height and enhance electron injection. In contrast, the hexagonal cell exhibited a more uniform electric field distribution in both regions, effectively suppressing leakage current. These findings underscore the critical role of active cell geometry in achieving robust reverse blocking performance in ultra-high-voltage SiC JBS diodes by clarifying the physical mechanisms contributing to leakage current behavior.
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 69-74
Open AccessImpact of Active Cell Geometry on the Static Performance of 10-kV 4H-SiC JBS (Junction Barrier Schottky) Diodes
This study investigates the influence of active cell geometry on the static performance of 10-kV 4H-Silicon Carbide (SiC) Junction Barrier Schottky (JBS) diodes. Two types of diodes were fabricated and characterized, one with a hexagonal cell and the other with a stripe cell. While forward conduction characteristics were comparable, the reverse leakage current of the hexagonal cell was more than two orders of magnitude lower than that of the stripe cell at 8 kV. 3D TCAD simulations revealed that this discrepancy stems from strong electric field concentrations both at the bottom corners of the P + junctions and at the center of the Schottky contact in the stripe structure. These localized fields reduce the Schottky barrier height and enhance electron injection. In contrast, the hexagonal cell exhibited a more uniform electric field distribution in both regions, effectively suppressing leakage current. These findings underscore the critical role of active cell geometry in achieving robust reverse blocking performance in ultra-high-voltage SiC JBS diodes by clarifying the physical mechanisms contributing to leakage current behavior.
- Open Access
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1055, 37-44
Comparative Study of 1.2kV 4H-SiC Bi-Directional MOSFET (BiD-MOS) Design Approaches: 2-Chip vs Monolithic Integration
Several 1.2kV 4H-SiC Bi-Directional MOSFETs (BiD-MOS) design approaches were successfully fabricated and evaluated based on their electrical characteristics. Both monolithic integration design approaches exhibited negligible differences in conduction, blocking, and switching characteristics when compared to their 2-Chip counterpart. However, during the short-circuit withstand time testing, severe gate oscillations were observed in the 2-Chip design, which was not an issue present in either monolithic configuration. As a result of its robust electrical behavior, monolithic integration emerges as a promising design approach for developing efficient and reliable Bi-Directional Switches.
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1055, 37-44
Open AccessComparative Study of 1.2kV 4H-SiC Bi-Directional MOSFET (BiD-MOS) Design Approaches: 2-Chip vs Monolithic Integration
Several 1.2kV 4H-SiC Bi-Directional MOSFETs (BiD-MOS) design approaches were successfully fabricated and evaluated based on their electrical characteristics. Both monolithic integration design approaches exhibited negligible differences in conduction, blocking, and switching characteristics when compared to their 2-Chip counterpart. However, during the short-circuit withstand time testing, severe gate oscillations were observed in the 2-Chip design, which was not an issue present in either monolithic configuration. As a result of its robust electrical behavior, monolithic integration emerges as a promising design approach for developing efficient and reliable Bi-Directional Switches.
- Open Access
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1055, 21-27
High-Voltage Performance Evaluation of 6.5 kV 4H-SiC JBSFET Architectures and MOSFET with Enhanced 3rd Quadrant Conduction
This paper reports on the comparative analysis of several 6.5 kV-rated 4H-SiC Junction Barrier Schottky integrated MOSFETs (JBSFETs) and 4H-SiC MOSFET to assess their forward conduction, 3 rd quadrant behavior, and blocking characteristics. Among different JBSFET architectures, the Island P+ JBSFET achieved nearly identical specific on-resistance (R on,sp ) to the nominal MOSFET while delivering superior 3 rd quadrant conduction and maintaining a high breakdown voltage. Further optimization of Schottky width demonstrated a trade-off between leakage suppression and 3 rd quadrant conduction efficiency that underscores the Island P+ JBSFET’s potential as a reliable high-voltage SiC power device for next-generation applications.
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1055, 21-27
Open AccessHigh-Voltage Performance Evaluation of 6.5 kV 4H-SiC JBSFET Architectures and MOSFET with Enhanced 3rd Quadrant Conduction
This paper reports on the comparative analysis of several 6.5 kV-rated 4H-SiC Junction Barrier Schottky integrated MOSFETs (JBSFETs) and 4H-SiC MOSFET to assess their forward conduction, 3 rd quadrant behavior, and blocking characteristics. Among different JBSFET architectures, the Island P+ JBSFET achieved nearly identical specific on-resistance (R on,sp ) to the nominal MOSFET while delivering superior 3 rd quadrant conduction and maintaining a high breakdown voltage. Further optimization of Schottky width demonstrated a trade-off between leakage suppression and 3 rd quadrant conduction efficiency that underscores the Island P+ JBSFET’s potential as a reliable high-voltage SiC power device for next-generation applications.
- Open Access
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 55-60
Edge Termination Design for Ultra High-Voltage (>10 kV) 4H-SiC Power Devices Using Background Doping Modulation (BDM)
Achieving reliable breakdown in ultra-high-voltage (>10 kV) SiC devices is limited by edge termination design, where low epitaxial doping (~4×10¹⁴ cm⁻³) results in lateral straggle to be more prominent, therefore necessitating wider spacing between Aluminum implants in conventional floating field rings (FFRs). This study introduces a background doping modulation (BDM) scheme, incorporating a moderately doped N-type confinement region within P+ rings, enabling tighter spacing without added process complexity for high-voltage MOSFETs. Fabricated BDM-FFRs achieved >13 kV breakdown (30% higher than conventional FFRs), with leakage current <10 nA at 10 kV, while reducing termination area by 18.6%. Therefore, the BDM-FFR demonstrates a scalable, compact, and high-performance edge termination approach for next-generation ultra-high-voltage SiC devices.
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 55-60
Open AccessEdge Termination Design for Ultra High-Voltage (>10 kV) 4H-SiC Power Devices Using Background Doping Modulation (BDM)
Achieving reliable breakdown in ultra-high-voltage (>10 kV) SiC devices is limited by edge termination design, where low epitaxial doping (~4×10¹⁴ cm⁻³) results in lateral straggle to be more prominent, therefore necessitating wider spacing between Aluminum implants in conventional floating field rings (FFRs). This study introduces a background doping modulation (BDM) scheme, incorporating a moderately doped N-type confinement region within P+ rings, enabling tighter spacing without added process complexity for high-voltage MOSFETs. Fabricated BDM-FFRs achieved >13 kV breakdown (30% higher than conventional FFRs), with leakage current <10 nA at 10 kV, while reducing termination area by 18.6%. Therefore, the BDM-FFR demonstrates a scalable, compact, and high-performance edge termination approach for next-generation ultra-high-voltage SiC devices.
- Open Access
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 81-88
Effect of Varying N+ Source Implantation Depth on the Electrical Characteristics of 1.2 kV 4H-SiC MOSFETs
The heavily doped N+ source region in 4H-SiC MOSFETs is a critical design parameter, as its depth and the profile strongly influence contact resistivity and conduction efficiency. This work investigates the impact of varying N+ implantation depth on the electrical performances of 1.2 kV MOSFETs in both Nominal (linear cell) and Hexagonal (HEXFET) architectures. By varying implantation energy at a fixed dose, three junction depths were obtained: 0.22 µm (shallow), 0.24 µm (moderate), and 0.27 µm (deep). Transfer Length Method (TLM) measurements revealed a significant reduction in source contact resistivity with increasing depth, from 3.91×10⁻ 5 Ω·cm² (shallow) to 1.22×10⁻ 6 Ω·cm² (deep). For Nominal MOSFET design, electrical measurements confirmed a corresponding decrease in specific on-resistance (R on,sp ), from 3.05 to 2.89 mΩ·cm². However, deeper implants introduced greater lateral straggle, shortening the effective channel length and reducing the threshold voltage (V th ) from 2.25 V to 1.96 V. The channel barrier potential lowering associated with lateral straggle increased leakage current in the blocking mode, resulting in reduced breakdown voltage (BV). For Nominal MOSFETs, BV decreased from 1610 V in the shallow split to 1470 V in the deep split, while HEXFETs exhibited sharper BV degradation due to their higher channel density. To address this limitation, optimized JFET doping was introduced, restoring the BV of the deep split to 1560 V in the Nominal architecture. These results demonstrate that although increased N+ depth improves conduction by lowering contact resistance, careful co-optimization with P-well and JFET design is necessary to suppress high leakage current during blocking mode.
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 81-88
Open AccessEffect of Varying N+ Source Implantation Depth on the Electrical Characteristics of 1.2 kV 4H-SiC MOSFETs
The heavily doped N+ source region in 4H-SiC MOSFETs is a critical design parameter, as its depth and the profile strongly influence contact resistivity and conduction efficiency. This work investigates the impact of varying N+ implantation depth on the electrical performances of 1.2 kV MOSFETs in both Nominal (linear cell) and Hexagonal (HEXFET) architectures. By varying implantation energy at a fixed dose, three junction depths were obtained: 0.22 µm (shallow), 0.24 µm (moderate), and 0.27 µm (deep). Transfer Length Method (TLM) measurements revealed a significant reduction in source contact resistivity with increasing depth, from 3.91×10⁻ 5 Ω·cm² (shallow) to 1.22×10⁻ 6 Ω·cm² (deep). For Nominal MOSFET design, electrical measurements confirmed a corresponding decrease in specific on-resistance (R on,sp ), from 3.05 to 2.89 mΩ·cm². However, deeper implants introduced greater lateral straggle, shortening the effective channel length and reducing the threshold voltage (V th ) from 2.25 V to 1.96 V. The channel barrier potential lowering associated with lateral straggle increased leakage current in the blocking mode, resulting in reduced breakdown voltage (BV). For Nominal MOSFETs, BV decreased from 1610 V in the shallow split to 1470 V in the deep split, while HEXFETs exhibited sharper BV degradation due to their higher channel density. To address this limitation, optimized JFET doping was introduced, restoring the BV of the deep split to 1560 V in the Nominal architecture. These results demonstrate that although increased N+ depth improves conduction by lowering contact resistance, careful co-optimization with P-well and JFET design is necessary to suppress high leakage current during blocking mode.
- Open Access
- 10 September 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 376, 11-18
Exploring the Influence of Implant Profile and Device Design on Basal Plane Dislocation Generation in 1.2kV 4H-SiC Power MOSFETs
Several 1.2kV 4H-SiC devices of various cell architectures have been successfully fabricated by employing different P+ implantation conditions, resulting in varying levels of Basal Plane Dislocation (BPD) densities across the different device designs. It was found that by utilizing devices designed with an orthogonal P+ source layout as opposed to the traditional P+ stripe pattern, the long-term reliability under sustained 3rd Quadrant current stress conduction can be greatly improved even in devices with medium BPD densities. In addition, the use of the unipolar current of the JBSFET can further enhance long-term reliability under sustained 3rd Quadrant current stress by mitigating stacking fault expansion, even in devices with a high BPD density.
- 10 September 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 376, 11-18
Open AccessExploring the Influence of Implant Profile and Device Design on Basal Plane Dislocation Generation in 1.2kV 4H-SiC Power MOSFETs
Several 1.2kV 4H-SiC devices of various cell architectures have been successfully fabricated by employing different P+ implantation conditions, resulting in varying levels of Basal Plane Dislocation (BPD) densities across the different device designs. It was found that by utilizing devices designed with an orthogonal P+ source layout as opposed to the traditional P+ stripe pattern, the long-term reliability under sustained 3rd Quadrant current stress conduction can be greatly improved even in devices with medium BPD densities. In addition, the use of the unipolar current of the JBSFET can further enhance long-term reliability under sustained 3rd Quadrant current stress by mitigating stacking fault expansion, even in devices with a high BPD density.