FCFrancesca Capocasa

Francesca Capocasa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Francesca Capocasa has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mortality of ultra-thin LGADs and PiN diodes from high energy deposition

    by A. Tishelman-Charny, A. Buzzi, F. Capocasa, G. D’AMen, S. Diaw, D. Duan, M.H. Mohamed Farook, G. Giacomini, M. Kurth, D. Ponman, et al.

  • Design and characterization of LGADs for photon science

    by F. Capocasa, G. Giacomini, A. Kuczewski, G. Pinaroli, D. Pinelli, J. Pinz, A.K. Rumaiz, D.P. Siddons, A. Verderosa, G.A. Carini

    Recent developments in X-ray technology have highlighted a significant gap between the advancements in X-ray facility capabilities and the corresponding limitations in detector/sensor technologies, especially in the soft X-ray energy range (i.e. 200 eV to 2 keV). While hybrid pixel detectors are the standard and well mature for higher-energy X-ray applications (i.e. 2–20 keV), their usage in the soft X-ray regime remains underexplored. The advancement of silicon Low Gain Avalanche Diodes (LGADs), characterized by moderate internal gains in the range of 3–10, have emerged as a promising solution for addressing the signal-to-noise ratio limitations inherent in the soft X-ray regime. However, several challenges remain in optimizing and characterize LGAD technology for this lower energy range. At Brookhaven National Laboratory, we are developing and optimizing a variant of LGAD silicon sensor for hybrid detectors targeting soft X-rays. This work will introduce the challenges and progress of our Detector for Imaging and Noise Attenuation (DIANA). We will discuss optimization strategies and present results from recently developed sensors. Furthermore, we will report on the currently achievable performance and outline future improvements.

  • Open Access

    Gepta-EX: a multi-channel germanium detector for X-ray absorption fine structure

    by Abdul K. Rumaiz, Francesca Capocasa, Anthony J. Kuczewski, Giovanni Pinaroli, Thomas Krings, Bruce Ravel, D. Peter Siddons

    Fluorescence-mode X-ray absorption spectroscopy (XAS) at high photon energies requires detectors with high stopping power and excellent energy resolution to measure weak element-specific signals. Traditional silicon-based detectors suffer from poor efficiency above ∼20 keV, while most high- Z materials such as cadmium telluride, cadmium zinc telluride, and gallium arsenide have focused predominantly on imaging applications with limited spectroscopic resolution. In contrast, germanium combines excellent stopping power with superior intrinsic energy resolution due to its low Fano factor and favorable charge transport properties, making it ideal for high-resolution spectroscopy in the 15 keV to 100 keV range. To address these requirements, we report on the development, fabrication, and performance evaluation of Gepta-EX, a compact multi-channel high-purity germanium (HPGe) detector system for fluorescence-mode XAS. The Gepta-EX system features a monolithic seven-channel HPGe pixel array integrated with low-noise CUBE charge-sensitive preamplifiers, housed within a thermally isolated compact cryostat operating near 90 K. The detector achieves energy resolutions of 218 eV at 5.9 keV (from a 55 Fe source) and 373 eV at 59.5 keV (from a 241 Am source), with uniform performance across all channels. By avoiding the escape peak interference commonly associated with silicon detectors and providing stable, high-resolution performance, Gepta-EX represents a powerful tool for high-energy X-ray spectroscopy.

  • Open Access

    Characterization of high-flux cadmium zinc telluride detectors coupled to MM-PAD readout ASICs for high-flux X-ray applications

    by Lena A. Franklin, Francesca Capocasa, Abdul K. Rumaiz, Mark W. Tate, Joseph Pinz, Donald Pinelli, Gabriella A. Carini, D. Peter Siddons, Sol M. Gruner, Julia Thom-Levy

    High-flux cadmium zinc telluride (HF-CZT) is a promising material for next-generation X-ray imaging due to its high stopping power, wide bandgap, and improved resistance to radiation-induced polarization [1]. We bonded 2 mm thick HF-CZT sensors with Cornell's Mixed-Mode Pixel Array ASICs, which combine analog charge integration and in-pixel digital counting to achieve single X-ray sensitivity, large full well capacity, and frame rates up to 10 kHz [2,3]. Detector characterization showed stable electron collection above 150 V bias, while hole collection remained limited by trapping even at 700 V. Temporal studies revealed non-negligible afterglow, with an unexpected increase in afterglow at higher biases, which was reduced by infrared illumination, suggesting that injected carriers reduce trapping near contact interfaces. Polarization measurements confirmed improved stability compared to conventional CZT, though polarization effects persisted, particularly with hole collection, with up to 5% signal loss and spatial distortion at high doses.


  • Open Access

    Gaia: segmented germanium detector for high-energy X-ray fluorescence and spectroscopic imaging

    by Abdul K. Rumaiz, Francesca Capocasa, Anthony J. Kuczewski, Giovanni Pinaroli, Ji Li, John Kuczewski, Kristina Finnelli, Katherine Koh, Lorianne Shutlz-Johnson, Carter Fitzgerald, et al.

    We present Gaia, a monolithic array of 96 high-purity germanium pixel detectors integrated with a custom low-noise application-specific integrated circuit (ASIC) and a field-programmable gate array (FPGA)-based data acquisition system. The sensor operates at ∼100 K using a commercial closed-cycle cryocooler, with the in-vacuum electronics thermally isolated from the cold finger to ensure thermal stability. The system demonstrates an average energy resolution of 711 eV at 122 keV, measured using a 57 Co source, and 253 eV at 5.89 keV, measured with 55 Fe across all channels. The readout architecture incorporates a high-performance FPGA paired with a dual-core ARM processor, forming a complete embedded Linux-based computing platform. Communication between the processor and FPGA is handled via memory-mapped I/O, and data are streamed over high-speed gigabit Ethernet. A full-scale 384-pixel Gaia detector, based on this 96-element module, is currently under fabrication.

  • Open Access

    Tracking oxygen vacancy migration in memristor devices using operando hard X-ray photoelectron spectroscopy

    by F. Capocasa, A. K. Rumaiz, C. Weiland, R. Goul, A. Marshall, I. Harding, A. Ozbay, A. J. Kuczewski, S. Karmakar, M. Boukhicha, et al.

    Fabrication of ultrathin (sub-2 nm) oxide semiconductor memristors poses the fundamental challenge of achieving oxide growth with atomic precision in terms of electronic structure and defect formation. Recently, ultrathin memristors consisting of bilayers of mixed \(\textrm{Al}_2\) \(\textrm{O}_3\) and MgO atomic layers were fabricated using an in vacuo atomic layer deposition process. This approach offers a unique platform for precise atomic control of oxygen vacancies in the device in which the vacancies are introduced by placing MgO atomic layers between pristine \(\textrm{Al}_2\) \(\textrm{O}_3\) layers. In this work, we present a systematic operando Hard X-ray PhotoElectron Spectroscopy (HAXPES) study of the switching of such memristors, combined with complementary current-voltage and capacitance-voltage (C-V) measurements. We used a memristor stack of \(\textrm{Al}_2\) \(\textrm{O}_3\)/MgO atomic layers, with the MgO-containing oxide deposited on the bottom Al metal electrode and a pure \(\textrm{Al}_2\) \(\textrm{O}_3\) layer below the top Pd electrode. HAXPES analysis shows a substantial change in the chemical shift of the Aluminum oxide when switching between the ”OFF” and ”ON” states indicative of a redistribution of oxygen vacancies in the device active layer. Interestingly, subsequent switching to the OFF state shows hysteretic behavior indicating the retention of some oxygen vacancies in the top \(\textrm{Al}_2\) \(\textrm{O}_3\) layer. This vacancy retention can be correlated with the stochastic behavior of the switching voltage observed in these devices. C–V measurements show a clear frequency-dependent response in the OFF state, consistent with enhanced polarization and vacancy trapping at low frequencies.


  • Open Access

    High-energy X-ray imaging with a Germanium MM-PAD hybrid pixel detector

    by Lena A. Franklin, Francesca Capocasa, Abdul K. Rumaiz, Mark W. Tate, Anthony J. Kuczewski, Joseph Pinz, Don Pinelli, Chris Leitz, Keith Warner, Gabriella A. Carini, et al.

    Germanium is a high-Z sensor material with excellent energy resolution and attractive properties for high-energy photon detection. Despite its advantages, the need for cryogenic operation and challenges in the fabrication of pixelated high-purity germanium have hindered the development of segmented detectors. We report on the fabrication and performance of a germanium imaging detector with 150 μm pixel pitch hybridized to the MM-PAD ASIC. The detector was capable of high-resolution radiographic imaging and has a fast temporal response. Additionally, we describe the detector's upper operating temperature limits using both the MM-PAD and MARS ASICs, achieving stable operation up to 130 K and 190 K, respectively.